What Is the Shield Arms Custom Glock® 43X MOS?
It's a factory-new Glock® 43X MOS built by Shield Arms around our patented S15 magazine. The S15 holds 15 rounds at the same length as the factory 10-round magazine, so you get 50% more capacity with no change to the grip. Every pistol ships with two S15 Gen 3 magazines and a steel mag catch installed, in one of three packages, and is test-fired before it goes to your FFL.
- Base pistol: Factory-new Glock® 43X MOS, 9mm
- Capacity: 15+1 with the included S15 magazines
- Ships with: (2) S15 Gen 3 magazines, steel mag catch installed
- Transfer: Ships to your FFL
The S15 Advantage
50% More Capacity, Same Footprint
The factory Glock® 43X holds 10 rounds. The S15 uses a staggered steel body to fit 15 in the same length, so the pistol carries and conceals exactly like a factory 43X but gives you five more rounds before a reload.
We build it complete: the steel mag catch the S15 needs, your package upgrades, and an optional in-house Cerakote finish, all installed and test-fired by our team. Want an even shorter grip for deep concealment? See the Custom S10 Series Glock® 43X MOS.
S-Series Capacity
15 Flush. Up to 25 When You Want It.
The included S15s sit flush at 15 rounds. S15 extensions and the one-piece S20 take the same pistol to 17, 20 or 25.
Factory capacity shown for comparison. See the S-Series.
Packages
Choose Your Package
Every package is a factory-new Glock® 43X MOS with two S15 Gen 3 magazines and a black nitride steel mag catch. Pro-Carry adds night sights and a Carry Magwell. Elite-Carry adds a threaded barrel and a McNally trigger.
Finish Options
The standard finish is Glock's factory nDLC. Or have the pistol Cerakoted in-house in one of our patterns. Each is applied by hand, so no two pistols look alike. Cerakote adds time to the build.
Factory nDLC (standard) Fallout Montana Mud Pineland
How It's Built
Built and Test-Fired by Shield Arms
- 1
Inspect the Pistol
Every build starts with a factory-new Glock® 43X MOS, inspected before any work begins.
- 2
Apply the Finish
If you chose a Cerakote pattern, it's applied in-house, cured and inspected.
- 3
Install the Package
Steel mag catch, plus the sights, magwell, barrel and trigger your package includes.
- 4
Test-Fire and Ship
Function-checked and test-fired with the included S15s, then shipped to your FFL.
Know Before You Order
Check These Before You Buy
- As a complete firearm, it ships to a licensed FFL dealer for transfer.
- The included 15-round magazines exceed capacity limits in some states. We can't ship to restricted locations.
- Run S-Series magazines. Factory polymer Glock® magazines aren't recommended with the steel catch; they cause extra wear.
- Optic mounting plates aren't included, if your optic needs one.
- Lead time varies with demand, and Cerakote adds time. Contact us for current timing.
- You're responsible for following all federal, state and local firearm and magazine laws.
Why the Steel Catch
The S15 Needs a Steel Mag Catch, So We Install One
S15 magazines are steel, and the factory polymer catch isn't compatible with them. Every Custom 43X MOS comes with our black nitride Standard steel catch already installed, so the pistol is ready to run S-Series magazines the day it arrives. Every S15 also comes with our Spring for Life guarantee: free replacement springs for as long as you own it.
Specifications
| Base pistol |
Factory-new Glock® 43X MOS |
| Caliber |
9x19mm (9mm Luger) |
| Capacity |
15+1 with S15 magazines (factory: 10+1) |
| Included magazines |
(2) S15 Gen 3, 15 rounds each |
| Also runs |
S15 +2, +5 and +10; S20 |
| Barrel length |
3.41 in (threaded 1/2x28 barrel with thread protector on Elite-Carry) |
| Overall length |
6.50 in |
| Height |
5.04 in |
| Width |
1.10 in (slide 0.87 in) |
| Weight |
About 18.7 oz unloaded; varies by package |
| Trigger |
Factory Glock® Safe Action, about 5.5 lb (McNally on Elite-Carry) |
| Sights |
Factory Glock® (AmeriGlo I-Dot on Pro-Carry and Elite-Carry) |
| Optics |
MOS optics-ready slide; plates not included |
| Rail |
Glock® Slim Mounting Rail |
| Mag catch |
Black nitride standard steel, installed |
| Finish |
Factory nDLC, or Fallout, Montana Mud or Pineland Cerakote |
| Transfer |
Ships to your FFL dealer |
| Warranty |
Glock® limited warranty on the pistol; Shield Arms lifetime warranty on our work and components |
Questions
Custom Glock® 43X MOS FAQ
Custom 43X MOS or Custom S10 Series?
This pistol keeps the factory grip and carries 15 flush. The Custom S10 Series shortens the grip for deep concealment and carries 10 flush, with the S15 still available.
Why buy custom instead of the parts?
We install every component, test-fire the pistol and back our work with a lifetime warranty. Doing it yourself takes tools and know-how, and you own the installation.
Can I run factory Glock® magazines?
We don't recommend it. Factory polymer magazines wear faster against a steel catch. Run S15 or S20 magazines.
How long will it take?
Lead time depends on current demand, and Cerakote adds curing time. Contact us for current timing.
Does it come with optic plates?
No. If your micro red dot needs a mounting plate, buy it separately. Many optics include one.
Is the Elite-Carry barrel suppressor-ready?
Yes. It's threaded 1/2x28, the common 9mm pitch, and ships with a thread protector.
Can I request parts not in a package?
The three packages are our standard builds. For anything else, contact us to talk through options and pricing.
What's the warranty?
Glock® covers the pistol under its limited warranty. Our work, installed components and S15 magazines carry the Shield Arms lifetime warranty, and the S15s get Spring for Life.
Related
Complete Your Build
Firearm Transfers
Email your preferred FFL to [email protected]. Include:
- Your name
- Order number
- FFL name and address
- Copy of the FFL (if available)
Important — Please Read
This is a serialized item considered a firearm by the BATFE. This item must ship to a Federal Firearms License (FFL) holder. All BATFE, GCA & NFA rules apply.
You are responsible for checking with your local FFL to confirm this firearm is legal in your state and that your FFL will accept it on your behalf. Shield Arms is not responsible for shipping or administrative charges from packages refused by the FFL selected at checkout.
This item is controlled for export under the International Traffic in Arms Regulations (ITAR).
Products specifications
|
Firearms Manufacturer
|
Glock |
|
Firearms Model
|
Glock 43X/48 |
Because every firearm is made to order, lead times are currently 7 to 10 business days.
Installation Help
Not sure how to install this product? Our step-by-step guides and video walkthroughs make it simple.
View Installation Guides →