Firearms

Shield Arms Firearms

Rifles That Fold. Pistols That Carry.

SA-15 and SA-9 rifles and pistols built on our patented folding lower, the fixed-stock SA-4, and custom Glock® pistols, including the S10 Series.

Every firearm ships to your FFL. How that works.

Patented Folding Lower   Billet Lowers Machined in Bigfork, MT   Ships to Your FFL   Financing Available

 
Why Shield Arms

What Sets Our Firearms Apart

 

A Patented Fold

The SA-15 and SA-9 fold at the receiver. The mechanism is machined into the lower, with no hinge adapter bolted on behind it.

Machined in Montana

Our SA-15, SA-9 and SA-4 lowers are machined from billet aluminum in our own shop in Bigfork, Montana.

Set Up for Carry

Custom Glock® pistols, including S10 Series builds with a shortened grip made for the patented S10 magazine.

Covered for Life

A lifetime warranty against defects on the receivers and builds we make.

An AR that folds at the receiver. Not at an adapter.

The SA-15 and SA-9 are built around our patented folding lower receiver. See how the FLR works.

Know Before You Order

Every Firearm Ships to Your FFL

Rifles, pistols, lower receivers and kits ship to a licensed dealer (FFL) of your choice, where you complete the transfer like any firearm purchase. Want to spread out the cost? Pay over time at checkout through Credova.

What Firearms Does Shield Arms Make?

Shield Arms builds AR-pattern rifles and pistols on its patented folding lower receiver, a fixed-stock billet AR, and custom Glock® pistols, from its shop in Bigfork, Montana.

  • SA-15: folding AR-15. 16" Pro and Elite rifles, the 11.5" Pro pistol in 5.56 NATO, stripped and complete folding lowers, and a builders kit.
  • SA-9: folding 9mm. The 7.5" pistol, the Gen2 stripped folding lower, and the SA-9 ASR Kit.
  • SA-4: non-folding billet AR-15 lower, sold stripped, complete, or as a 16" mid-length M-LOK rifle in 5.56 NATO.
  • Custom Glock®: 43, 43X MOS, 48 MOS and the S10 Series 43X MOS, plus the S10 grip modification service for the 43X and 48.
  • Every firearm ships to your FFL.
Questions

Firearms FAQ

 

What's the difference between the SA-15 and the SA-9?

Caliber. The SA-15 is an AR-15 pattern in 5.56 NATO and 300 BLK; the SA-9 is 9mm. Both fold at the receiver on our patented FLR.

What is the SA-4?

Our non-folding billet AR-15 lower, for builds that don't need to fold. It's sold stripped, as a complete lower, or as a complete 16" rifle.

What is an S10 Series Glock®?

A Glock® 43X MOS with the grip shortened to fit the patented S10 magazine, 10 rounds flush. The same pistol still runs 12, 15, 17 or 20. See the S10 system.

Do I need an FFL?

Yes. Every firearm and lower receiver ships to a licensed dealer, where you complete the transfer. See how FFL transfers work.

View as Grid List
Sort by
Custom Glock® 43 - Black

Custom Glock 43

Factory Glock 43 upgraded by Shield Arms with AmeriGlo I-Dot night sights, optimized Z-Series steel mag catch, and includes both Z8 and Z9 magazines for enhanced everyday carry performance.
$609.95
Premium SA-4 Complete Non-Folding Lower Receiver

Premium Complete SA-4 Non-Folding Lower Receiver

Complete AR-15 lower receiver built on the Shield Arms SA-4 7075-T6 billet lower receiver. Equipped with Match Nickel PTFE Trigger, Radian Weapons Talon Ambidextrous Safety Selector, B5 Systems BRAVO Stock, and B5 Systems Type 23 Pistol Grip. Features upper tension screw, threaded bolt catch pin, and beveled mag well. CNC machined in Bigfork, Montana. Lifetime warranty.
$324.95
SA-15 Builders Kit - Black

SA-15 Builders Kit

Build your own custom folding AR-15 with Shield Arms SA-15 Builders Kit. Features patented Folding Lower Receiver with integrated folding mechanism - no adapter required. Includes 7075-T6 billet upper and lower receivers, 15" M-LOK handguard, carbine buffer tube, proprietary H2 buffer, and thread locker. Lighter, stronger, and more compact than traditional folding adapter systems. Custom in-house Cerakote in Black, Fallout, Montana Mud, or Pineland. Made in USA with lifetime warranty.
$599.95
SA-15 Complete Folding Lower Receiver w/Carbine Stock

SA-15 Complete Folding Lower Receiver w/Carbine Stock

A fully assembled SA-15 folding AR-15 lower with the patented built-in fold and no adapter. It comes with a B5 Systems Bravo stock, Radian ambi safety and H2 buffer installed. Add your upper. Ships to your FFL.
$544.95
SA-15 Folding 11.5" Pro Pistol - 5.56 NATO - Black

SA-15 Folding 11.5" Pro AR-15 Pistol, 5.56 NATO

The SA-15 Pro is a folding AR-15 pistol in 5.56 NATO built on our patented Folding Lower Receiver. It folds to 20.5" at the receiver with no adapter and no modified bolt carrier. 11.5" 1:7 nitride barrel, carbine gas with an adjustable gas block, 10" M-LOK handguard, SBA3 brace. Made in Bigfork, Montana. Ships to your FFL.
$1,499.95
SA-15 Folding 16" ELITE Rifle - Black

SA-15 Folding 16" ELITE Rifle - 5.56 NATO

A folding AR-15 rifle in 5.56 NATO, built to order on our patented Folding Lower Receiver, with a 3.5 lb trigger, Velocity adjustable gas block, Dead Air flash hider and Geissele Maritime bolt catch installed. Ships to your FFL.
$1,898.95
SA-15 Folding 16" PRO Rifle - Black

SA-15 Folding 16" PRO Rifle - 5.56 NATO

A complete folding AR-15 rifle in 5.56 NATO, built on our patented Folding Lower Receiver with no adapter. It has a 16" mid-length barrel, an adjustable gas block, and Radian and B5 Systems parts, and comes with two PMAGs. Ships to your FFL.
$1,498.95
SA-15 Stripped Folding Lower Receiver - Black

SA-15 Stripped Folding Lower Receiver

Our patented AR-15 folding lower, sold stripped: the fold is machined into the 7075-T6 billet receiver, so there’s no folding adapter. Buffer included; ships to your FFL.
$374.95
SA-4 Non-Folding Stripped Billet Lower Receiver - Black

SA-4 Non-Folding Stripped Billet Lower Receiver

A non-folding AR-15 lower machined from 7075-T6 billet in Bigfork, Montana, with a threaded bolt catch pin and built-in upper tension screw. Sold stripped; ships to your FFL.
$153.95
SA-9 ASR Kit

SA-9 ASR Kit: Folding 9mm AR Pistol, Backpack & IFAK

The SA-9 ASR (Active Shooter Response) Kit packs our folding 9mm AR pistol into an Eberlestock Apprentice backpack with a Shield Arms IFAK, two 20-round Glock 19 magazines, Magpul MBUS 3 backup sights and a Mountain Partisan sling. The SA-9 folds to 13" on our patented FLR. Ships to your FFL.
$1,964.95
Custom Glock® 43X MOS - Black

Custom Glock 43X MOS

A factory-new Glock® 43X MOS built by Shield Arms around our patented S15: 15 rounds flush, 50% more than factory, in the same grip. Ships to your FFL with two S15 Gen 3 magazines and a steel mag catch installed.
$569.95
SA-4 16" Mid-length M-LOK - 5.56 NATO - Black right side

SA-4 16" Mid-length M-LOK - 5.56 NATO

Complete 16" AR-15 rifle chambered in 5.56 NATO featuring forged 7075-T6 receivers, mid-length gas system, adjustable gas block, and 13" M-LOK handguard. Weighs just 6.7 lbs and includes two magazines.
$994.95
Picture of SA-4 Forged Builder Combo

SA-4 Forged Builder Combo

AR-15 builder combo including Shield Arms SA-4 Forged Mil-Spec Lower Receiver, Mil-Spec Forged Upper Receiver, Radian Weapons Raptor-LT Ambidextrous Charging Handle, Radian Weapons Talon Ambidextrous Safety Selector, and Radian Weapons Ultralight AR-15 QD End Plate. Lifetime warranty on SA-4 lower.
$324.95
SA-9 Gen2 Stripped Folding Lower Receiver - 9mm

SA-9 Gen2 Stripped Folding Lower Receiver - 9mm

Our patented folding lower for 9mm blowback builds, sold stripped. Runs Glock double-stack 9mm magazines, locks back on empty, and includes the 7.0 oz buffer. Ships to your FFL.
$399.95
Custom Glock® 48 MOS - Black

Custom Glock 48 MOS

A factory-new Glock® 48 MOS built by Shield Arms around our patented S15: 15 rounds flush, 50% more than factory, in the same grip. Ships to your FFL with two S15 Gen 3 magazines and a steel mag catch installed.
$569.95
Picture of Enhanced Complete SA-4 Non-Folding Lower

Enhanced Complete SA-4 Non-Folding Lower

Complete AR-15 lower receiver built on the Shield Arms SA-4 7075-T6 billet lower receiver. Upgraded with Nickel PTFE Trigger, B5 Systems BRAVO Stock, and B5 Systems Type 23 Pistol Grip. Features upper tension screw, threaded bolt catch pin, and beveled mag well. CNC machined in Bigfork, Montana. Lifetime warranty.
$299.95
Mil-Standard Complete SA-4 Non-Folding Lower

Mil-Standard Complete SA-4 Non-Folding Lower

The Shield Arms Mil-Standard Complete SA-4 Non-Folding Lower is a fully assembled AR-15 lower receiver built on the SA-4 billet lower receiver, and equipped with a mil-spec trigger group, A2 grip, M4 stock, and mil-spec safety selector. Features a built-in upper tension screw and threaded bolt catch pin with hardware included. Marked MULTI. Ready to accept any mil-spec AR-15 upper receiver. Made in Bigfork, Montana. Lifetime warranty.
$244.95
Custom S10 Series Glock 43X MOS - Black Enhanced

Custom S10 Series Glock 43X MOS

A factory Glock® 43X MOS, CNC grip-chopped by Shield Arms so the 10-round S10 magazine sits flush. Ships to your FFL with two S10 magazines, S10 magwell and steel mag catch. Runs S-Series magazines up to 25 rounds.
$649.95
Threaded Bolt Catch Pin

Threaded Bolt Catch Pin

A stainless steel threaded bolt catch pin, .530" long, for Shield Arms and Aero Precision M4E1 lowers. Threads into the receiver instead of a roll pin. Doesn’t fit mil-spec lowers.
$7.45
SA-9 FLR 7.5" Folding Pistol - 9mm - Black

SA-9 Gen 2 Folding 9mm AR Pistol, 7.5"

The SA-9 Gen 2 is a folding 9mm AR pistol built on our patented Folding Lower Receiver. It folds from 23.5" to 13" at the receiver with no adapter, runs Glock double-stack 9mm magazines, and locks back on empty. 7.5" threaded barrel, SBA3 brace, billet 7075-T6 lower made in Bigfork, Montana. Ships to your FFL with two 20-round Glock 19 magazines and a sling.
$1,499.95 $1,399.95
SA-15 Complete Folding Lower Receiver w/Pistol Brace

SA-15 Complete Folding Lower Receiver w/Pistol Brace

Built-in folding AR-15 lower receiver with SBA3 brace. Precision machined 7075-T6 aluminum, saves 0.5+ lbs vs adapters. Made in USA with lifetime warranty.
$629.95
S10 Grip Modification for the Glock 43X/48 - Black

S10 Grip Modification for the Glock 43X/48

Permanent CNC grip chop for OEM Glock® 43X and 48 frames. The S10 sits flush at 10 rounds, and the pistol still runs 12 to 25 with S-Series mags. Ships back with two S10 magazines.
$139.95