SA-15 Complete Folding Lower Receiver w/Carbine Stock

A fully assembled SA-15 folding AR-15 lower with the patented built-in fold and no adapter. It comes with a B5 Systems Bravo stock, Radian ambi safety and H2 buffer installed. Add your upper. Ships to your FFL.
SKU: SA-SA15FB
Availability: In stock
$544.95
i h
Buy now, pay later Available at checkout on orders over $150
Know Before You Order

A Complete Lower. Add Your Upper.

This is a fully assembled SA-15 folding lower with a B5 Systems Bravo stock. You supply the upper receiver, including the bolt carrier group and charging handle. The lower is the serialized part of the firearm, so it ships to the licensed dealer (FFL) you choose. How FFL transfers work.

With a stock installed, pair it with an upper that has a barrel of 16" or longer, or register the build as an SBR. Folding-stock and magazine-capacity rules vary by state and city. Check yours before you buy.

What Is the SA-15 Complete Folding Lower Receiver w/Carbine Stock?

It's a fully assembled AR-15 lower built on our patented Folding Lower Receiver, with the fold machined into the receiver, so there's no folding adapter. It's machined from 7075-T6 billet, hard-coat anodized black, and comes with the lower parts kit, a Radian ambidextrous safety, B5 Systems grip and Bravo stock, a mil-spec carbine buffer tube and our proprietary H2 buffer installed. It weighs 2.45 lb, is marked MULTI and accepts standard AR-15 uppers and magazines. Made in Bigfork, Montana, with a lifetime warranty.

  • Includes: lower parts kit, stock, buffer tube, H2 buffer and spring
  • You add: a complete AR-15 upper
  • Weight: 2.45 lb
  • Caliber marking: MULTI
SA-15 Complete Lower

Bring Your Upper. It Folds.

Most folding ARs bolt a hinge on behind the receiver, which adds length and another joint. The SA-15 folds at the receiver itself, on our patented FLR, so the lower is what makes the rifle fold. Pin on the upper you already trust and it closes for a truck, a safe or a pack.

It arrives assembled with the parts kit, Radian safety, B5 Systems furniture and buffer installed, so there's no lower to build. It takes a standard bolt carrier group and standard AR-15 magazines.

2.45 lb Complete lower
0 Folding adapters
7075-T6 Billet aluminum
USA Bigfork, Montana
Features

Built Around the Fold

  • Patented Folding Lower

    The hinge is machined into the 7075-T6 billet lower. No folding adapter behind the receiver.

  • Assembled and Ready

    Parts kit, Radian safety, B5 grip and Bravo stock, buffer tube, H2 buffer and spring installed.

  • Tight Upper Fit

    An upper tension screw takes the play out between your upper and lower.

  • Standard AR Parts

    Standard uppers, bolt carrier groups, magazines, triggers and grips. Only the buffer is our own.

Finishing the Build

Pin On an Upper and Function Check

Any standard AR-15 upper with a bolt carrier group and charging handle pins on. With this stock, use a barrel of 16" or longer unless the build is registered as an SBR. Then run a function check before you shoot. Our installation guides walk you through it.

Compare

Pick Your Starting Point

Every SA-15 folds on the same patented lower. Start stripped, start with a complete lower, or buy the whole rifle.

Option Parts Kit Upper Stock
Complete Lower w/Carbine Stock (this page) ✓ — B5 Bravo
Complete Lower w/Pistol Brace ✓ — Pistol brace
Stripped Folding Lower — — —
SA-15 16" PRO Rifle ✓ ✓ B5 Bravo

Want the folding lower plus the upper parts to build out? See the SA-15 Builders Kit. See all folding lowers.

Specifications

Receiver Shield Arms patented Folding Lower Receiver, 7075-T6 billet aluminum
Finish Matte black hard-coat anodized, Type III Class 2 (MIL-A-8625)
Weight 2.45 lb, complete
Caliber marking MULTI
Trigger Nickel Teflon coated trigger
Safety Radian, ambidextrous
Grip B5 Systems
Stock B5 Systems Bravo
Buffer tube Mil-spec carbine length, mil-spec end plate and castle nut
Buffer Shield Arms proprietary H2-weight buffer and spring, installed; required for the folding lower
Upper fit Upper tension screw
Magazine well Beveled; takes standard AR-15 magazines
Fits Standard AR-15 upper receivers and bolt carrier groups
You add Complete upper with bolt carrier group and charging handle
Made in Bigfork, Montana, USA
Warranty Lifetime warranty
Transfer Ships to your FFL

Hard-Coat Anodized Black

The receiver is Type III hard-coat anodized for wear and corrosion resistance, and the B5 Systems stock and grip are black to match.

Black
Questions

SA-15 Complete Lower FAQ

How is the FLR different from a folding adapter?

An adapter adds a hinge between the receiver and the buffer tube. On the SA-15 the fold is machined into the lower receiver itself, so there's no adapter and no special bolt carrier. See how the FLR works.

Can it fire while folded?

No. Unfold it and lock the receiver before firing. The fold is for carry and storage.

What do I need to finish it?

A complete AR-15 upper with a bolt carrier group and charging handle. The stock, buffer and lower parts are already installed.

Will my upper fit?

Standard AR-15 uppers pin on, and it runs a standard, unmodified bolt carrier group. The upper tension screw takes up any play between the two receivers.

What calibers can I build?

It's marked MULTI. Our SA-15 builds run 5.56 NATO and 300 BLK, and it pairs with other AR-15 uppers that run on a standard AR-15 magazine and bolt carrier group.

What barrel length can I use?

With a stock installed, a barrel under 16" makes it a short-barreled rifle under federal law, which requires NFA registration. Use 16" or longer, or see the pistol brace version. Check your state and local rules too.

Can I use a different buffer?

No. The SA-15 runs our proprietary H2-weight buffer, which comes installed. It's part of the folding system, so a standard AR-15 buffer isn't a substitute.

Can I swap the stock, grip or trigger?

Yes. The mil-spec carbine tube takes carbine AR-15 stocks, and the grip and trigger swap for standard AR-15 parts. Keep the buffer that came installed.

Carbine stock or pistol brace?

Building a rifle on a 16" or longer barrel, pick this one. Building an AR pistol on a shorter barrel, pick the pistol brace version.

What's covered by the warranty?

Our lifetime warranty covers defects in materials and workmanship on the parts we make, including the folding receiver. Parts from Radian, B5 Systems and other makers carry their own manufacturers' warranties.

Firearm Transfers

Email your preferred FFL to [email protected]. Include:

  • Your name
  • Order number
  • FFL name and address
  • Copy of the FFL (if available)
Products specifications
Firearms Manufacturer Shield Arms
Firearms Model SA-15
Installation Help

Not sure how to install this product? Our step-by-step guides and video walkthroughs make it simple.

View Installation Guides →
Customers who bought this item also bought
PMAG® 30 AR/M4 GEN M3 w/Window (30 Rounds): 5.56x45 NATO (.223 Remington)

PMAG 30 AR/M4 GEN M3 Window - 30 rds - 5.56x45mm / .223 Remington

The next-generation PMAG 30 AR/M4 GEN M3 Window is a 30-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons.
$17.95
Mountain Partisan Sling

Mountain Partisan Sling

Two-stage progressive tension two point sling with quick adjust system and high-temp rated Kevlar loop. Made in USA with lifetime warranty.
$74.95
Picture of Vapor Concepts AR-15 Magwell

Vapor Concepts AR-15 Magwell

A one-piece flared magwell and trigger guard for MILSPEC forged AR-15 lowers, made in Bigfork, Montana. Check your lower before ordering: returns aren’t accepted for fit issues.
$34.95
Springfield® Echelon +5 Mag Extension - Black

Springfield Echelon +5 Magazine Extension

A billet aluminum +5 extension that takes a factory Springfield Echelon 17-round magazine to 22 rounds of 9mm. It runs on your factory spring, so there’s nothing else to buy.
$39.95

FREE SHIPPING FOR ORDERS OVER $100!