Shield Arms

View as Grid List
Sort by
DS-20 Magazine for Glock 17

DS20 Magazine for Glock 17

A 20-round steel magazine for the Glock 17, 34, 45, 47 and 19X, three more than factory with only a minimal increase in length. Runs with a DS-Series steel mag catch, sold separately or in the DS20 Starter Kit.
$41.95
Z9 Starter Kit

Z9 Starter Kit for Glock 43 – Magazine + Steel Mag Catch

Everything you need to run a Z9 in your Glock® 43: one 9-round Z9 steel magazine and one black nitride steel mag catch. Made in the USA.
$49.95
DS-18 Magazine for Glock 19

DS18 Magazine for Glock 19

An 18-round steel magazine for the Glock 19, three more than factory with only a minimal increase in length. Runs with a DS-Series steel mag catch, sold separately or in the DS18 Starter Kit.
$41.95
DS18 Starter Kit for Glock 19 — Gen 3

DS18 Starter Kit for Glock 19

One DS18 18-round steel magazine and the DS-Series steel mag catch it runs on, in a Gen 3 or Gen 4/5/6 version. Three more rounds than factory in your Glock 19.
$49.95
DS-Series Standard Mag Catch for Glock 17/19 - Gen 3

DS-Series Standard Mag Catch for Glock 17 / 19

The steel mag catch Shield Arms DS18 and DS20 magazines run on. Fits the Glock 17, 19, 34, 45, 47 and 19X in Gen 3 or Gen 4/5/6 versions. Made in the USA.
$19.95
Z9 Premium Steel Mag Catch for Glock® 43 - Nitride

Premium Z-Series Mag Catch for Glock 43

Premium-grade steel magazine catch engineered exclusively for Glock 43 pistols with Shield Arms Z8 and Z9 magazines. Features extended engagement surface and enhanced knurling for superior control and reliability.
$28.95
S15 Combo Pack 1 - Nitrocarb

S15 Combo Pack 1 for Glock 43X / 48

A full Glock® 43X / 48 carry setup: three S15 Gen 3 15-round steel magazines and a DUAL-FIT black nitride steel mag catch. 45 rounds, all flush. Made in the USA.
$121.95
Shield Arms S15 Gen 3 - 15 Round Glock 43X/48 Magazine

S15 Gen 3 15-Round Steel Magazine for Glock 43X / 48

The original steel 15-round magazine for the Glock 43X and 48. The patented S15 fits 15 rounds flush in the grip, with nothing hanging below it. Extends to 17, 20 or 25 rounds. Requires a Shield Arms steel mag catch. Made in USA, with a lifetime warranty and Spring for Life.
$39.95
S20 - 20 Round Glock 43X/48 Magazine

S20 20-Round Magazine for Glock 43X / 48

A 20-round, one-piece steel 9mm magazine for the Glock 43X and 48, built as the high-capacity spare next to a flush S15. Requires a Shield Arms steel mag catch (sold separately).
$44.95 $39.95
Z9 +3 Mag Extension for Glock® 43 - Black

Z9 +3 Magazine Extension for Glock 43

Takes a Shield Arms Z9 magazine from 9 rounds to 12 in your Glock® 43, double the factory mag. Billet 6061 aluminum, black anodized, 14-coil plus-power spring included. Made in the USA.
$37.95
Z9 Pistol Magazine for Glock® 43 - PowerCron

Z9 9-Round Steel Magazine for Glock 43

9 rounds of 9mm in a steel magazine for the Glock® 43, the same length as a factory mag with a pinky extension. Takes Z9 +1 and +3 extensions. Requires a Z-Series steel mag catch.
$37.95
Z9 Magazine Combo 1 for Glock 43

Z9 Magazine Combo 1 for Glock 43 – 3 Z9 Magazines + Steel Mag Catch

A full Glock® 43 carry setup: three Z9 9-round steel magazines and the black nitride steel mag catch they run on. 27 rounds total. Made in the USA.
$112.95
DS20 Starter Kit for Glock 17 — Gen 3

DS20 Starter Kit for Glock 17

One DS20 20-round steel magazine and the DS-Series steel mag catch it runs on, in a Gen 3 or Gen 4/5/6 version. Three more rounds than factory in your Glock 17, 34, 45, 47 or 19X.
$49.95
S10 Magazine - 10 Round Magazine for Glock® 43X / 48

S10 Magazine for Modified Glock 43X / 48

Patented 10-round steel magazine that sits flush in a Shield Arms grip-chopped Glock® 43X or 48. Extends to 12 or 15 rounds with S10 extensions. Requires a steel mag catch. Made in the USA.
$35.95
S15 Combo Pack 2 - Nitrocarb

S15 Combo Pack 2 for Glock 43X / 48

Three S15 Gen 3 15-round magazines and an S15 +5 extension for the Glock 43X/48: carry two flush and run the third at 20.
$149.95
Z9 +0 Plastic Base Plates

Z9 +0 Plastic Base Plate for Glock 43

A replacement plastic base plate for the Shield Arms Z9 magazine in the Glock 43. Keeps the Z9 at 9 rounds, uses your existing spring, and slides on with no tools.
$2.95
S15 Combo Pack 3 - Black

S15 Combo Pack 3 for Glock 43X / 48

Three S15 Gen 3 15-round magazines and two S15 +5 extensions for the Glock 43X/48: carry one flush and run two at 20.
$179.95
S10 +2 Pre-Installed Magazine Extension - Black

S10 +2 Pre-Installed Magazine Extension

A Shield Arms S10 magazine with the +2 extension pre-installed: 12 rounds, ready to load. For Shield grip-chopped Glock® 43X and 48 pistols. Requires a steel mag catch. Made in the USA.
$68.95
DS20 Combo 1 - Gen 3 Glock 17

DS20 Combo 1 for Glock 17

Three DS20 20-round steel magazines and the DS-Series steel mag catch they run on, in a Gen 3 or Gen 4/5/6 version. A full Glock 17 setup with three more rounds per mag than factory.
$124.95
Z9 Magazine Combo 2 - Black

Z9 Magazine Combo 2 for Glock 43

Three Z9 9-round steel magazines and a Z9 +1 extension for the Glock 43: run two at 9 and one at 10. Requires a Shield Arms Z-Series steel mag catch (sold separately).
$137.95 $119.95
Threaded Bolt Catch Pin

Threaded Bolt Catch Pin

A stainless steel threaded bolt catch pin, .530" long, for Shield Arms and Aero Precision M4E1 lowers. Threads into the receiver instead of a roll pin. Doesn’t fit mil-spec lowers.
$7.45
SA-4 Non-Folding Stripped Billet Lower Receiver - Black

SA-4 Non-Folding Stripped Billet Lower Receiver

A non-folding AR-15 lower machined from 7075-T6 billet in Bigfork, Montana, with a threaded bolt catch pin and built-in upper tension screw. Sold stripped; ships to your FFL.
$153.95
SA-15 Stripped Folding Lower Receiver - Black

SA-15 Stripped Folding Lower Receiver

Our patented AR-15 folding lower, sold stripped: the fold is machined into the 7075-T6 billet receiver, so there’s no folding adapter. Buffer included; ships to your FFL.
$374.95
SA-9 Gen2 Stripped Folding Lower Receiver - 9mm

SA-9 Gen2 Stripped Folding Lower Receiver - 9mm

Our patented folding lower for 9mm blowback builds, sold stripped. Runs Glock double-stack 9mm magazines, locks back on empty, and includes the 7.0 oz buffer. Ships to your FFL.
$399.95
Shield Arms S10 +2 Extension - Black

Shield Arms S10 +2 Extension

Adds 2 rounds to the Shield Arms S10 magazine, taking it from 10 to 12. Billet 6061 aluminum with an easy-access floor plate for cleaning without removing the extension. Made in the USA.
$39.95
Z8 Magazine for Glock® 43

Z8 8-Round Flush Steel Magazine for Glock 43

8 rounds of 9mm in a steel magazine for the Glock® 43 that sits flush, the same length as the factory 6-round mag. Requires a Z-Series steel mag catch.
$36.95
Z9 +1 Mag Extension for Glock® 43 - Black

Z9 +1 Magazine Extension for Glock 43

Takes a Shield Arms Z9 magazine from 9 rounds to 10 in your Glock® 43. Billet 6061 aluminum, easy-access floor plate, 12-coil plus-power spring included. Made in the USA.
$39.95
Z9 +1 Pre-Installed Magazine Extension for Glock® 43 - Black

Z9 Magazine with +1 Pre-Installed Extension for Glock 43

A Shield Arms Z9 steel magazine with the +1 extension and plus-power spring installed: 10 rounds in your Glock® 43, ready to load. Requires a Z-Series steel mag catch.
$68.95
Z9 Magazine Combo 3 - Black

Z9 Magazine Combo 3 for Glock 43

Three Z9 9-round steel magazines and two Z9 +1 extensions for the Glock 43: run two at 10 and one at 9. Requires a Shield Arms Z-Series steel mag catch (sold separately).
$165.95 $139.95
DS18 Combo 1 for Glock 19 - Gen 3

DS18 Combo 1 for Glock 19

Three DS18 18-round steel magazines and the DS-Series steel mag catch they run on, in a Gen 3 or Gen 4/5/6 version. A full Glock 19 setup with three more rounds per mag than factory.
$124.95
S10 +5 Pre-Installed Magazine Extension - Black

S10 +5 Pre-Installed Magazine Extension

A Shield Arms S10 magazine with the +5 extension pre-installed: 15 rounds, ready to load. For Shield grip-chopped Glock® 43X and 48 pistols. Requires a steel mag catch. Made in the USA.
$68.95
S15 Combo Pack 4 - Black

S15 Combo Pack 4 for Glock 43X / 48

Three S15 Gen 3 15-round magazines, two S15 +5 extensions and the DUAL-FIT steel mag catch for the Glock 43X and 48. Carry one flush at 15 and run two 20-round reloads; catch is right- or left-handed.
$199.95
Shield Arms S10 +5 Extension - Black

Shield Arms S10 +5 Extension

Adds 5 rounds to the Shield Arms S10 magazine, taking it from 10 to 15. Billet 6061 aluminum with an easy-access floor plate for cleaning without removing the extension. Made in the USA.
$39.95
Standard Z9 Mag Catch for Glock® 43 - Nitride

Standard Z-Series Mag Catch for Glock 43

A steel mag catch for the Glock 43 that runs Shield Arms Z8 and Z9 magazines, with a low-profile, textured button. Replaces the factory polymer catch with basic tools.
$9.95
S15 Starter Kit - Nitrocarb

S15 Starter Kit for Glock 43X / 48

Everything you need to run an S15 in your Glock 43X or 48: one S15 Gen 3 15-round steel magazine and a DUAL-FIT black nitride steel mag catch. Made in the USA.
$44.95
Shield Arms Carry Magwell - Glock® 43X/48 - Black

Shield Arms Carry Magwell for Glock 43X / 48

A low-profile magwell for the Glock® 43X and 48: faster, more forgiving reloads with minimal added bulk. CNC-machined 6061-T6 aluminum, drop-in install, made in Bigfork, Montana.
$74.95
S-Series Dual Fit Mag Catch

DUAL-FIT Mag Catch for Glock 43X / 48

Steel mag catch for the Glock 43X and 48 that runs Shield Arms S-Series magazines and Glock’s factory 15-round steel magazines on one catch. Black nitride, made in the USA. Pick the hand you shoot with. Right-handed puts the button on the left side of the frame, under your right thumb, like a factory 43X/48. Left-handed puts it on the right side.
$19.95