CZ P10S +5 Pre-Installed 9mm Magazine Extension

Manufacturer: Shield Arms
A complete factory CZ P10S magazine with the Shield Arms +5 extension and a +10% power spring installed and tested: 15 rounds of 9mm, ready to load.
SKU: CZP10S-ME-5INS-BLK
Availability: In stock
$72.95
i h
Buy now, pay later Available at checkout on orders over $150
Compatibility

Fits the CZ P10S.

This is a complete factory CZ P10S 10-round 9mm magazine with our +5 extension and a +10% power spring already installed. It's made for the CZ P10S subcompact. Running a P10C or P10F? See the P10C or P10F +5 Pre-Installed. Capacity laws vary by state and city; check yours before you order.

What Is the CZ P10S +5 Pre-Installed Magazine?

It's a factory CZ P10S 10-round magazine with our +5 extension and a +10% power spring already installed and function-tested, so it holds 15 rounds of 9mm and arrives ready to load. The billet aluminum extension has an easy-access floor plate and index cuts. Black anodize, machined in Bigfork, Montana, with a lifetime warranty and Spring for Life.

  • Capacity: 15 rounds of 9mm (10 + 5)
  • Fits: CZ P10S
  • In the box: factory CZ P10S magazine, +5 extension and +10% power spring installed
  • Also sold: extension only, for magazines you already own
CZ P10S +5 Pre-Installed

15 Rounds for the Subcompact. Ready to Load.

A factory P10S magazine holds 10. This one holds 15, and it shows up assembled: a genuine CZ magazine, our billet +5 extension and a +10% power spring, function-tested before it ships. Nothing to install. Load it and go.

A common setup is a flush factory magazine in the pistol for the smallest grip, and a 15 as the spare. Put a factory base pad back on, and the magazine is back to 10.

15 Rounds of 9mm
+5 Over the factory 10
0 Parts to install
USA Extension machined in Bigfork, MT
Features

What You're Getting

  • Genuine CZ Magazine

    A factory CZ P10S 10-round magazine body, the same one that ships with the pistol.

  • Installed and Sprung

    The +5 extension comes fitted, with a +10% power spring installed to keep all 15 rounds feeding. Function-tested before it ships.

  • Easy-Access Floor Plate

    Reach the spring and follower for cleaning or service without taking the extension off the magazine.

  • Index Cuts

    Cuts on the billet 6061 extension give you a better grip when you pull the magazine from a pouch.

Capacity

10 From the Factory. 15 Out of the Box.

Five more rounds than the factory P10S magazine. Already own magazines? The P10S +5 extension upgrades them to the same 15.

Factory magazine capacity shown for comparison. Capacity laws vary by state and city. Check yours before you buy.

Already Own Mags?

Upgrade the Ones You Have

The CZ P10S +5 Extension is the same extension sold on its own, with the same +10% power spring. It replaces the factory base pad on the P10S magazines you already own and takes them to 15. Allen wrenches are included.

Compare

Pre-Installed or Extension Only?

Get a complete magazine ready to load, or upgrade the factory magazines you already own.

Option Magazine Rounds Ready to Load
CZ P10S +5 Pre-Installed (this page) Factory P10S, included 15 ✓
CZ P10S +5 Extension Your factory mag 15 —

Extensions for Glock®, CZ, S&W and Springfield: see every mag extension.

Specifications

Capacity 15 rounds, 9mm (10 + 5)
Fits CZ P10S
Magazine Factory CZ P10S 10-round magazine, 9mm
Extension +5, pre-installed
Spring +10% power spring, installed
Extension material Billet 6061 aluminum
Finish Type II anodized, Black
Floor plate Easy access, no need to remove the extension for cleaning
Grip Index cuts for pulling from a pouch
Magwells Works with all known magwells
Testing Function-tested before it ships
Made in Extension machined in Bigfork, Montana, USA
Warranty Lifetime warranty plus Spring for Life
Questions

CZ P10S +5 Pre-Installed FAQ

Is this a genuine CZ magazine?

Yes. The magazine body is a factory CZ P10S 10-round magazine. We install our +5 extension and a +10% power spring, then function-test it before it ships.

Do I need to install anything?

No. It arrives assembled. Load it and it's ready to go.

Will it work in my P10C or P10F?

It's made for the P10S. For the compact and full-size pistols, see the P10C +5 Pre-Installed and the P10F +5 Pre-Installed (24 rounds).

Why the +10% power spring?

Five extra rounds means more spring compression. The heavier spring keeps feeding consistent from the first round to the 15th.

What color is the extension?

Black anodize.

Do I have to remove the extension to clean it?

No. The easy-access floor plate opens to the spring and follower with the extension still on the magazine.

Will it fit my magazine pouches?

The extended magazine is longer than a factory P10S magazine. Check that it seats in your magazine pouches before you rely on it.

Pre-installed or extension only?

Pre-installed gets you a complete 15-round magazine. Already own P10S magazines? The extension upgrades them, Allen wrenches included.

What's covered?

A lifetime warranty on the extension against defects in materials and workmanship, plus free replacement springs for life through Spring for Life.

ODA Green

Used on: magazine extensions, magwells

ODA's (Operational Detachment Alpha) are the boots on the ground operational teams of a Special Forces Group. This color began as a special run for a deployed ODA. In continued support we have decided to continue the color as a standard offering and donate a portion of the proceeds to The Green Beret Foundation. Finish is anodized in green.

QPQ Nitrocarburizing Surface Treatment

Used on: magazines, barrels, slides

QPQ Nitrocarburizing is a type of surface treatment used to enhance the durability and corrosion resistance of metal parts. The process involves heating the metal in a controlled environment, where nitrogen and carbon are introduced to the surface of the metal. This forms a thin layer of a hard compound called "nitrides," which increase the surface hardness of the metal.

During the QPQ Nitrocarburizing process, the metal is immersed in a special salt bath and heated to high temperatures. The salt bath contains a mixture of chemicals that release nitrogen and carbon, which penetrate the surface of the metal. The process is carefully controlled to ensure that the nitrogen and carbon penetrate to a specific depth, creating a uniform layer of nitrides on the metal's surface.

The resulting nitride layer provides many benefits to the metal parts, including increased hardness, wear resistance, and corrosion resistance. This treatment helps to increase the lifespan and durability of metal parts, making them more reliable and long-lasting.

Any “scuffing” you see in the surface finish is completely normal, and will not affect the durability or corrosion resistance of the steel.

Electroless Nickel Plating

Used on: magazines

Silver electroless plating offers superior electrical conductivity and corrosion protection with excellent deposit uniformity and adhesion properties. This bright, reflective finish provides outstanding solderability and contact resistance while maintaining the consistent thickness and coverage that electroless plating processes are known for. Black electroless nickel plating provides these same exceptional deposit properties - including lubricity, hardness, and corrosion resistance - but with a fully conductive and uniform black surface finish that combines superior performance with an attractive dark appearance.

This item is controlled for export by the International Traffic in Arms Regulations (ITAR). Please check your state and local laws regarding magazine capacity restrictions.

Freedom Restricted States

If you live in a state that restricts magazine capacity we cannot ship to you unless you are law enforcement or otherwise exempt. If you are exempt from your state's ban please send us a copy of your documentation or official email to [email protected]. Please include your order number.

If you purchase from a ban state and you are NOT exempt, we will cancel your order and charge you a 5% cancellation fee.

Notice

GLOCK® is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H.  Neither Shield Arms nor this site are affiliated in any manner with, or otherwise endorsed by GLOCK, Inc. or GLOCK Ges.m.b.H.  The use of "GLOCK" on this and associated pages on our website is merely to advertise the sale of GLOCK® pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts, visit www.glock.com.

Products specifications
Firearms Manufacturer CZ
Firearms Model CZ P10S
Installation Help

Not sure how to install this product? Our step-by-step guides and video walkthroughs make it simple.

View Installation Guides →
Customers who bought this item also bought
CZ P10S  +5 Magazine Extension - Black

CZ P10S +5 Magazine Extension

A billet aluminum +5 extension for factory CZ P10S magazines that takes them from 10 to 15 rounds of 9mm. The +10% power spring and Allen wrenches are included; six anodized colors.
$39.95
Picture of CZ P10C +5 Pre-Installed 9mm Magazine Extension

CZ P10C +5 Pre-Installed 9mm Magazine Extension

A complete factory CZ P10C magazine with the Shield Arms +5 extension and a +10% power spring installed and tested: 20 rounds of 9mm, ready to load. Fits the P10C and P07. Made in USA with a lifetime warranty.
$72.95

FREE SHIPPING FOR ORDERS OVER $100!