CZ P10S +5 Magazine Extension

Manufacturer: Shield Arms
A billet aluminum +5 extension for factory CZ P10S magazines that takes them from 10 to 15 rounds of 9mm. The +10% power spring and Allen wrenches are included; six anodized colors.
SKU: CZP10S-ME-5
*
  • Not available
  • Not available
  • Not available
  • Not available
  • Not available
  • Not available
Availability: In stock
$39.95
i h
Buy now, pay later Available at checkout on orders over $150
Compatibility

Fits Factory CZ P10S Magazines.

This extension replaces the base pad on a factory CZ P10S 10-round 9mm magazine and takes it to 15. It doesn't fit P10C, P07, P10F or P09 magazines; those take the CZ P10C / P07 Extension and the CZ P10F / P09 Extension. A +10% power spring and Allen wrenches are in the box. Capacity laws vary by state and city; check yours before you order.

What Is the Shield Arms CZ P10S +5 Magazine Extension?

It's a billet aluminum base pad extension that takes a factory CZ P10S 10-round magazine to 15 rounds of 9mm. It comes with a +10% power spring and the Allen wrenches to install it, has an easy-access floor plate for cleaning without removing the extension, and has index cuts for a better grip from a pouch. Six Type II anodized colors, machined in Bigfork, Montana, with a lifetime warranty and Spring for Life.

CZ P10S +5

15 Rounds From the Smallest P10.

The P10S's factory magazine holds 10. This extension swaps in for the base pad and takes it to 15, with a +10% power spring to keep every round feeding. Everything you need to install it is in the box.

A common setup is a flush factory magazine in the pistol for the shortest grip, and a 15 as the spare. Put the factory base pad back on, and the magazine is back to 10.

15 Rounds in a P10S mag
+5 Over the factory 10
6 Anodized colors
USA Machined in Bigfork, MT
Features

Machined From Billet, Built to Service

  • +10% Power Spring

    Five extra rounds means more spring compression. The included heavier spring keeps feeding consistent from the first round to the 15th.

  • Easy-Access Floor Plate

    Reach the spring and follower for cleaning or service without taking the extension off the magazine.

  • Index Cuts

    Cuts on the extension body give you a better grip when you pull the magazine from a pouch.

  • Billet 6061 Aluminum

    Machined from billet aluminum in Bigfork, Montana, and finished with a Type II anodize in six colors.

Capacity

10 From the Factory. 15 With Ours.

Five more rounds of 9mm on the factory P10S magazine. The magazine stays a factory magazine. Only the base pad and spring change.

Factory magazine capacity shown for comparison. Capacity laws vary by state and city. Check yours before you buy.

Installation

Swap the Base Pad and Spring.

Take the factory base pad and spring out of your P10S magazine, then reassemble with the Shield Arms extension and the included +10% power spring. The Allen wrenches you need are in the box. Follow the included instructions for safe, correct installation, and find step-by-step help on our installation guides page. Rather skip the install? Order it pre-installed on a factory P10S magazine.

Compare

Extension or Pre-Installed?

Upgrade the factory magazines you already own, or get a complete magazine ready to load.

Option Magazine Rounds Colors Ready to Load
CZ P10S +5 Extension (this page) Your factory mag 15 Six colors —
CZ P10S +5 Pre‑Installed Factory P10S, included 15 Black ✓

Extensions for Glock®, CZ, S&W and Springfield: see every mag extension.

Specifications

Adds 5 rounds of 9mm (factory P10S 10-round magazine to 15)
Fits Factory CZ P10S magazines
Doesn't fit P10C, P07, P10F, P09 and CZ Duty magazines
Included Extension, +10% power spring, Allen wrenches
Material Billet 6061 aluminum
Finish Type II anodized: Black, Red, Grey, Mud, ODA Green or Gold
Floor plate Easy access, no need to remove the extension for cleaning
Grip Index cuts for pulling from a pouch
Magwells Works with all known magwells
Made in Bigfork, Montana, USA
Warranty Lifetime warranty plus Spring for Life

Six Anodized Colors

Every color is Type II anodized over billet 6061 aluminum. Pick yours from the Mag Extension Color menu.

ODA Green was first made for a deployed Special Forces Operational Detachment Alpha team. We still offer it in honor of Special Forces teams around the world and donate a portion of every ODA Green sale to the Green Beret Foundation.

Mud: our Mud anodize shade changed slightly in 2025. Mud items bought before then may not be an exact match to the current shade.

Black Red Grey Mud ODA Green Gold
Questions

CZ P10S +5 Extension FAQ

Will it fit my P10S magazine?

It fits factory CZ P10S magazines and takes the 10-round magazine to 15. It doesn't fit P10C, P07, P10F, P09 or Duty magazines.

I have a P10C or P07. Which extension do I need?

The CZ P10C / P07 Extension, which takes their 15-round magazines to 20. For the P10F or P09, use the CZ P10F / P09 Extension.

Is a spring included?

Yes. A +10% power spring comes in the box to handle the extra compression of five more rounds.

How do I install it?

Remove the factory base pad and spring, then reassemble with the Shield Arms extension and the included spring. The Allen wrenches are included. See our installation guides for step-by-step help.

Do I have to remove it to clean the magazine?

No. The easy-access floor plate opens to the spring and follower with the extension still on the magazine.

Can I go back to 10 rounds?

Yes. Put the factory base pad and spring back in. The extension makes no permanent change to the magazine, so keep your original parts.

Will it fit my magazine pouches?

The extended magazine is longer than a factory P10S magazine. Check that it seats in your magazine pouches before you rely on it.

Extension or pre-installed?

Buy the extension to upgrade P10S magazines you already own, in any of six colors. Buy the pre-installed version to get it already fitted to a new factory P10S magazine; the pre-installed extension comes in Black only.

What's ODA Green?

A green anodized finish first made for a deployed Special Forces team. A portion of every ODA Green sale goes to the Green Beret Foundation.

What's covered?

A lifetime warranty against defects in materials and workmanship, plus free replacement springs for life through Spring for Life.

ODA Green

Used on: magazine extensions, magwells

ODA's (Operational Detachment Alpha) are the boots on the ground operational teams of a Special Forces Group. This color began as a special run for a deployed ODA. In continued support we have decided to continue the color as a standard offering and donate a portion of the proceeds to The Green Beret Foundation. Finish is anodized in green.

QPQ Nitrocarburizing Surface Treatment

Used on: magazines, barrels, slides

QPQ Nitrocarburizing is a type of surface treatment used to enhance the durability and corrosion resistance of metal parts. The process involves heating the metal in a controlled environment, where nitrogen and carbon are introduced to the surface of the metal. This forms a thin layer of a hard compound called "nitrides," which increase the surface hardness of the metal.

During the QPQ Nitrocarburizing process, the metal is immersed in a special salt bath and heated to high temperatures. The salt bath contains a mixture of chemicals that release nitrogen and carbon, which penetrate the surface of the metal. The process is carefully controlled to ensure that the nitrogen and carbon penetrate to a specific depth, creating a uniform layer of nitrides on the metal's surface.

The resulting nitride layer provides many benefits to the metal parts, including increased hardness, wear resistance, and corrosion resistance. This treatment helps to increase the lifespan and durability of metal parts, making them more reliable and long-lasting.

Any “scuffing” you see in the surface finish is completely normal, and will not affect the durability or corrosion resistance of the steel.

Electroless Nickel Plating

Used on: magazines

Silver electroless plating offers superior electrical conductivity and corrosion protection with excellent deposit uniformity and adhesion properties. This bright, reflective finish provides outstanding solderability and contact resistance while maintaining the consistent thickness and coverage that electroless plating processes are known for. Black electroless nickel plating provides these same exceptional deposit properties - including lubricity, hardness, and corrosion resistance - but with a fully conductive and uniform black surface finish that combines superior performance with an attractive dark appearance.

This item is controlled for export by the International Traffic in Arms Regulations (ITAR). Please check your state and local laws regarding magazine capacity restrictions.

Freedom Restricted States

If you live in a state that restricts magazine capacity we cannot ship to you unless you are law enforcement or otherwise exempt. If you are exempt from your state's ban please send us a copy of your documentation or official email to [email protected]. Please include your order number.

If you purchase from a ban state and you are NOT exempt, we will cancel your order and charge you a 5% cancellation fee.

Notice

GLOCK® is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H.  Neither Shield Arms nor this site are affiliated in any manner with, or otherwise endorsed by GLOCK, Inc. or GLOCK Ges.m.b.H.  The use of "GLOCK" on this and associated pages on our website is merely to advertise the sale of GLOCK® pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts, visit www.glock.com.

Products specifications
Firearms Manufacturer CZ
Firearms Model CZ P10S
Installation Help

Not sure how to install this product? Our step-by-step guides and video walkthroughs make it simple.

View Installation Guides →
Customers who bought this item also bought
CZ P10C / P07  +5/4 Magazine Extension - Black

CZ P10C / P07 / Duty +5/4 Magazine Extension

Billet aluminum +5/4 magazine extension for compact CZ magazines. Adds 5 rounds of 9mm or 4 rounds of .40 S&W to the CZ P10C and P07, and takes the 15-round CZ Duty magazine to 20. Allen wrenches included. Made in USA with a lifetime warranty and Spring for Life.
$39.95
Shield Arms S15 Gen 3 - 15 Round Glock 43X/48 Magazine

S15 Gen 3 15-Round Steel Magazine for Glock 43X / 48

A patented 15-round steel magazine that sits flush in the Glock 43X and 48, in Nitrocarb, Silver Nickel or Black Nickel. It runs on a Shield Arms steel mag catch such as the DUAL-FIT, sold separately.
$39.95
Shield Arms S15 +2 Magazine Extension - Black

S15 +2 Magazine Extension for Glock 43X / 48

A billet aluminum +2 extension that takes a Shield Arms S15 magazine from 15 to 17 rounds in the Glock 43X/48. The 11-coil plus-power spring is included.
$34.95
Replacement Spring for CZ Magazine w/ Shield Arms +5 Extension

Replacement Spring for CZ Magazine w/ Shield Arms +5 Extension

A replacement magazine spring for CZ P10S, P10C / P07 and P10F magazines running a Shield Arms +5 extension. Choose the 12-, 13- or 14-coil version to match your magazine.
$2.95
Picture of CZ P10S +5 Pre-Installed 9mm Magazine Extension

CZ P10S +5 Pre-Installed 9mm Magazine Extension

A complete factory CZ P10S magazine with the Shield Arms +5 extension and a +10% power spring installed and tested: 15 rounds of 9mm, ready to load.
$72.95

FREE SHIPPING FOR ORDERS OVER $100!