CZ P10F +5 Pre-Installed 9mm Magazine Extension

Manufacturer: Shield Arms
A complete factory CZ P10F magazine with the Shield Arms +5 extension and a +10% power spring installed and tested: 24 rounds of 9mm, ready to load. Fits the P10F and P09. Made in USA with a lifetime warranty.
SKU: CZP10F-ME-5INS-BLK
Availability: In stock
$72.95
i h
Buy now, pay later Available at checkout on orders over $150
Compatibility

Fits the CZ P10F and P09.

This is a complete factory CZ P10F 19-round 9mm magazine with our +5 extension and a +10% power spring already installed. It runs in the CZ P10F and the CZ P09, which use the same magazine. It doesn't fit the CZ Duty, which uses its own magazine, or compact and subcompact CZs. Duty owner? The CZ P10F / P09 / Duty Extension fits your 17-round magazine. Capacity laws vary by state and city; check yours before you order.

What Is the CZ P10F +5 Pre-Installed Magazine?

It's a factory CZ P10F 19-round magazine with our +5 extension and a +10% power spring already installed and function-tested, so it holds 24 rounds of 9mm and arrives ready to load. It runs in the CZ P10F and P09. The billet aluminum extension has an easy-access floor plate and index cuts. Black anodize, machined in Bigfork, Montana, with a lifetime warranty and Spring for Life.

  • Capacity: 24 rounds of 9mm (19 + 5)
  • Fits: CZ P10F and CZ P09
  • In the box: factory CZ P10F magazine, +5 extension and +10% power spring installed
  • Also sold: extension only, for magazines you already own
CZ P10F +5 Pre-Installed

24 Rounds, Ready to Load.

A factory P10F magazine holds 19. This one holds 24, and it shows up assembled: a genuine CZ magazine, our billet +5 extension and a +10% power spring, function-tested before it ships. Nothing to install. Load it and go.

It's the same extension that's in service with law enforcement agencies around the world. Running a P09 too? Both pistols take the same full-size magazine, so this one works in either.

24 Rounds of 9mm
+5 Over the factory 19
2 Pistols: P10F and P09
USA Extension machined in Bigfork, MT
Features

What You're Getting

  • Genuine CZ Magazine

    A factory CZ P10F 19-round magazine body, the same one that ships with the pistol.

  • Installed and Sprung

    The +5 extension comes fitted, with a +10% power spring installed to keep all 24 rounds feeding. Function-tested before it ships.

  • Easy-Access Floor Plate

    Reach the spring and follower for cleaning or service without taking the extension off the magazine.

  • Index Cuts

    Cuts on the billet 6061 extension give you a better grip when you pull the magazine from a pouch.

Capacity

19 From the Factory. 24 Out of the Box.

Five more rounds than the factory P10F magazine. Already own magazines? The +5/4 extension upgrades your P10F and P09 magazines to the same 24, and takes the CZ Duty's 17-round magazine to 22.

Factory magazine capacity shown for comparison. Capacity laws vary by state and city. Check yours before you buy.

Own a CZ Duty?

Put the Extension on Your Duty Mag.

The Duty uses its own magazine, so this complete P10F magazine won't fit it. The CZ P10F / P09 / Duty +5/4 Extension does: it replaces the base pad on the Duty's 17-round magazine and takes it to 22. It also upgrades P10F and P09 magazines you already own. Allen wrenches are included. For the Duty's 15-round magazine, see the CZ P10C / P07 Extension.

Compare

Pre-Installed or Extension Only?

Get a complete magazine ready to load, or upgrade the factory magazines you already own.

Option Magazine Rounds Ready to Load
CZ P10F +5 Pre-Installed (this page) Factory P10F, included 24 ✓
CZ P10F / P09 / Duty Extension Your factory mag 22 or 24 —

Extensions for Glock®, CZ, S&W and Springfield: see every mag extension.

Specifications

Capacity 24 rounds, 9mm (19 + 5)
Fits CZ P10F (Gen 1 and Gen 2) and CZ P09
Doesn't fit CZ Duty, P10C, P07, P10S
Magazine Factory CZ P10F 19-round magazine, 9mm
Extension +5, pre-installed
Spring +10% power spring, installed
Extension material Billet 6061 aluminum
Finish Type II anodized, Black
Floor plate Easy access, no need to remove the extension for cleaning
Grip Index cuts for pulling from a pouch
Magwells Works with all known magwells
Testing Function-tested before it ships
Made in Extension machined in Bigfork, Montana, USA
Warranty Lifetime warranty plus Spring for Life
Questions

CZ P10F +5 Pre-Installed FAQ

Is this a genuine CZ magazine?

Yes. The magazine body is a factory CZ P10F 19-round magazine. We install our +5 extension and a +10% power spring, then function-test it before it ships.

Do I need to install anything?

No. It arrives assembled. Load it and it's ready to go.

Will it work in my CZ P09?

Yes. The P10F and P09 use the same full-size magazine, so it runs in either pistol.

Does it fit the CZ Duty?

No. The Duty uses its own magazine. The +5/4 extension fits the Duty's 17-round magazine and takes it to 22.

Is it available in .40 S&W?

No, this magazine is 9mm only. The extension adds 4 rounds to a 15-round P09 .40 S&W magazine, for 19.

Why the +10% power spring?

Five extra rounds means more spring compression. The heavier spring keeps feeding consistent from the first round to the 24th.

What color is the extension?

Black anodize.

Do I have to remove the extension to clean it?

No. The easy-access floor plate opens to the spring and follower with the extension still on the magazine.

Can I use it in competition?

Magazine length and capacity rules vary by organization and division and change over time, so check your division's current rulebook before a match.

What's covered?

A lifetime warranty on the extension against defects in materials and workmanship, plus free replacement springs for life through Spring for Life.

ODA Green

Used on: magazine extensions, magwells

ODA's (Operational Detachment Alpha) are the boots on the ground operational teams of a Special Forces Group. This color began as a special run for a deployed ODA. In continued support we have decided to continue the color as a standard offering and donate a portion of the proceeds to The Green Beret Foundation. Finish is anodized in green.

QPQ Nitrocarburizing Surface Treatment

Used on: magazines, barrels, slides

QPQ Nitrocarburizing is a type of surface treatment used to enhance the durability and corrosion resistance of metal parts. The process involves heating the metal in a controlled environment, where nitrogen and carbon are introduced to the surface of the metal. This forms a thin layer of a hard compound called "nitrides," which increase the surface hardness of the metal.

During the QPQ Nitrocarburizing process, the metal is immersed in a special salt bath and heated to high temperatures. The salt bath contains a mixture of chemicals that release nitrogen and carbon, which penetrate the surface of the metal. The process is carefully controlled to ensure that the nitrogen and carbon penetrate to a specific depth, creating a uniform layer of nitrides on the metal's surface.

The resulting nitride layer provides many benefits to the metal parts, including increased hardness, wear resistance, and corrosion resistance. This treatment helps to increase the lifespan and durability of metal parts, making them more reliable and long-lasting.

Any “scuffing” you see in the surface finish is completely normal, and will not affect the durability or corrosion resistance of the steel.

Electroless Nickel Plating

Used on: magazines

Silver electroless plating offers superior electrical conductivity and corrosion protection with excellent deposit uniformity and adhesion properties. This bright, reflective finish provides outstanding solderability and contact resistance while maintaining the consistent thickness and coverage that electroless plating processes are known for. Black electroless nickel plating provides these same exceptional deposit properties - including lubricity, hardness, and corrosion resistance - but with a fully conductive and uniform black surface finish that combines superior performance with an attractive dark appearance.

This item is controlled for export by the International Traffic in Arms Regulations (ITAR). Please check your state and local laws regarding magazine capacity restrictions.

Freedom Restricted States

If you live in a state that restricts magazine capacity we cannot ship to you unless you are law enforcement or otherwise exempt. If you are exempt from your state's ban please send us a copy of your documentation or official email to [email protected]. Please include your order number.

If you purchase from a ban state and you are NOT exempt, we will cancel your order and charge you a 5% cancellation fee.

Notice

GLOCK® is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H.  Neither Shield Arms nor this site are affiliated in any manner with, or otherwise endorsed by GLOCK, Inc. or GLOCK Ges.m.b.H.  The use of "GLOCK" on this and associated pages on our website is merely to advertise the sale of GLOCK® pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts, visit www.glock.com.

Products specifications
Firearms Manufacturer CZ
Firearms Model CZ P10F / P09
Installation Help

Not sure how to install this product? Our step-by-step guides and video walkthroughs make it simple.

View Installation Guides →
Customers who bought this item also bought
CZ P10F / P09 / Duty +5/4 Magazine Extension - Black

CZ P10F / P09 / Duty +5/4 Magazine Extension

Billet aluminum +5/4 magazine extension for full-size CZ magazines. Adds 5 rounds of 9mm or 4 rounds of .40 S&W to the CZ P10F and P09, and takes the 17-round CZ Duty magazine to 22. Made in USA with a lifetime warranty and Spring for Life.
$39.95
Picture of CZ P10C +5 Pre-Installed 9mm Magazine Extension

CZ P10C +5 Pre-Installed 9mm Magazine Extension

A complete factory CZ P10C magazine with the Shield Arms +5 extension and a +10% power spring installed and tested: 20 rounds of 9mm, ready to load. Fits the P10C and P07. Made in USA with a lifetime warranty.
$72.95
CZ P10C / P07  +5/4 Magazine Extension - Black

CZ P10C / P07 / Duty +5/4 Magazine Extension

Billet aluminum +5/4 magazine extension for compact CZ magazines. Adds 5 rounds of 9mm or 4 rounds of .40 S&W to the CZ P10C and P07, and takes the 15-round CZ Duty magazine to 20. Allen wrenches included. Made in USA with a lifetime warranty and Spring for Life.
$39.95

FREE SHIPPING FOR ORDERS OVER $100!