CZ P10F / P09 / Duty +5/4 Magazine Extension

Manufacturer: Shield Arms
Billet aluminum +5/4 magazine extension for full-size CZ magazines. Adds 5 rounds of 9mm or 4 rounds of .40 S&W to the CZ P10F and P09, and takes the 17-round CZ Duty magazine to 22. Made in USA with a lifetime warranty and Spring for Life.
SKU: CZP10F-ME-5
*
  • Not available
  • Not available
  • Not available
  • Not available
  • Not available
  • Not available
Availability: In stock
$39.95
i h
Buy now, pay later Available at checkout on orders over $150
Compatibility

Fits Full-Size CZ Magazines

This extension fits factory full-size magazines for the CZ P10F, the CZ P09 and the 17-round CZ Duty. It doesn't fit compact or subcompact magazines. Running a P10C, P07 or a 15-round Duty magazine? See the CZ P10C / P07 Extension. For the P10S, see the CZ P10S +5 Extension.

What Is the Shield Arms CZ P10F / P09 / Duty +5/4 Magazine Extension?

It replaces the factory base pad on a full-size CZ magazine and adds 5 rounds of 9mm or 4 rounds of .40 S&W. One extension fits three pistols: the CZ P10F, the CZ P09 and the new CZ Duty with its 17-round magazine. It's machined from billet 6061 aluminum, has an easy-access floor plate for cleaning without removing the extension, and is made in the USA with a lifetime warranty and Spring for Life.

  • Capacity: +5 in 9mm, +4 in .40 S&W
  • Fits: CZ P10F, P09 and Duty 17-round magazines
  • Material: billet 6061 aluminum, Type II anodized
  • Included: Allen wrenches for installation
  • Also sold: pre-installed on a P10F magazine
Three Fitments

One Extension. Three Full-Size CZs.

The P10F and P09 run the same 19-round full-size magazine, so this extension has always covered both. CZ's new Duty uses its own 17-round magazine, and it takes this same extension. That makes it a +5 for every full-size CZ in the current lineup: 24 rounds in a P10F or P09, 22 in a Duty.

The Duty was built for agency service, and so was this extension. It's in service with law enforcement agencies around the world, on the same full-size CZ magazines officers already carry. Own more than one of these pistols? It's one part number for all three.

Fitment

Which Pistols It Fits

  • CZ P10F

    CZ's striker-fired full-size. The 19-round 9mm magazine goes to 24.

  • CZ P09

    CZ's hammer-fired DA/SA full-size. 9mm goes from 19 to 24. In .40 S&W, the 15-round magazine goes to 19.

  • CZ Duty

    CZ's newest striker-fired pistol. Fits the 17-round magazine that ships with the Duty 4.0 F and 4.0 F MS, taking it from 17 to 22.

  • Running a Compact?

    The P10C, P07 and 15-round Duty magazine take the P10C / P07 Extension. The P10S has its own +5.

Capacity

Up to 24 Rounds From a Full-Size CZ

Five more rounds in 9mm, four in .40 S&W. CZ's own +2 base pad takes the Duty magazine to 19. This extension takes it to 22.

Factory magazine capacity shown for comparison. Capacity laws vary by state and city. Check yours before you buy.

Features

Machined From Billet, Built to Service

  • Easy-Access Floor Plate

    Reach the spring and follower for cleaning or service without taking the extension off the magazine.

  • Index Cuts

    Cuts on the extension body give you a better grip when you pull the magazine from a pouch.

  • Billet 6061 Aluminum

    Machined from billet aluminum and finished with a Type II anodize. Made in the USA.

  • Spring for Life

    A lifetime warranty, plus free replacement springs for as long as you own it through Spring for Life.

Installation

Replaces the Factory Base Pad

The Allen wrenches you need come in the package. Follow the included instructions for safe, correct installation. Step-by-step help is also on our installation guides page. Rather skip the install? Order the CZ P10F +5 Pre-Installed and it arrives on a P10F magazine, ready to load.

Specifications

Adds 5 rounds of 9mm or 4 rounds of .40 S&W
Fits CZ P10F, CZ P09 and CZ Duty 17-round magazines
9mm capacity P10F and P09: 19 to 24. Duty: 17 to 22
.40 S&W capacity P09: 15 to 19
Magazine Factory CZ full-size magazines
Included Allen wrenches for installation
Doesn't fit P10C, P07, P10S and 15-round Duty magazines
Material Billet 6061 aluminum
Finish Type II anodized
Floor plate Easy access, no need to remove the extension for cleaning
Grip Index cuts for pulling from a pouch
Made in USA
Warranty Lifetime warranty plus Spring for Life

A Note on Mud Anodizing

Our Mud anodize shade changed slightly in 2025. Mud items bought before then may not be an exact match to the current shade.

Questions

CZ Full-Size Extension FAQ

Does it fit the CZ Duty?

Yes. It fits the 17-round Duty magazine that comes with the Duty 4.0 F and 4.0 F MS, and takes it to 22 rounds. For the 15-round Duty magazine, use the CZ P10C / P07 Extension.

Will one extension work for my P10F and my P09?

Yes. Both pistols use the same full-size magazine, so the extension fits either one.

Does it work with .40 S&W magazines?

Yes. On a 15-round P09 .40 S&W magazine it adds 4 rounds, for 19 total.

Do I need any tools to install it?

No. The Allen wrenches you need are included. Step-by-step help is on our installation guides page.

Will it fit my P10C or P07?

No. Compact magazines take the CZ P10C / P07 Extension. The P10S takes the CZ P10S +5 Extension.

Do I have to remove it to clean the magazine?

No. The easy-access floor plate opens to the spring and follower with the extension still on the magazine.

Extension or pre-installed?

Buy the extension to upgrade magazines you already own. Buy the P10F +5 Pre-Installed to get it already fitted to a new P10F magazine.

What's covered?

A lifetime warranty against defects, plus free replacement springs for life through Spring for Life.

ODA Green

Used on: magazine extensions, magwells

ODA's (Operational Detachment Alpha) are the boots on the ground operational teams of a Special Forces Group. This color began as a special run for a deployed ODA. In continued support we have decided to continue the color as a standard offering and donate a portion of the proceeds to The Green Beret Foundation. Finish is anodized in green.

QPQ Nitrocarburizing Surface Treatment

Used on: magazines, barrels, slides

QPQ Nitrocarburizing is a type of surface treatment used to enhance the durability and corrosion resistance of metal parts. The process involves heating the metal in a controlled environment, where nitrogen and carbon are introduced to the surface of the metal. This forms a thin layer of a hard compound called "nitrides," which increase the surface hardness of the metal.

During the QPQ Nitrocarburizing process, the metal is immersed in a special salt bath and heated to high temperatures. The salt bath contains a mixture of chemicals that release nitrogen and carbon, which penetrate the surface of the metal. The process is carefully controlled to ensure that the nitrogen and carbon penetrate to a specific depth, creating a uniform layer of nitrides on the metal's surface.

The resulting nitride layer provides many benefits to the metal parts, including increased hardness, wear resistance, and corrosion resistance. This treatment helps to increase the lifespan and durability of metal parts, making them more reliable and long-lasting.

Any “scuffing” you see in the surface finish is completely normal, and will not affect the durability or corrosion resistance of the steel.

Electroless Nickel Plating

Used on: magazines

Silver electroless plating offers superior electrical conductivity and corrosion protection with excellent deposit uniformity and adhesion properties. This bright, reflective finish provides outstanding solderability and contact resistance while maintaining the consistent thickness and coverage that electroless plating processes are known for. Black electroless nickel plating provides these same exceptional deposit properties - including lubricity, hardness, and corrosion resistance - but with a fully conductive and uniform black surface finish that combines superior performance with an attractive dark appearance.

This item is controlled for export by the International Traffic in Arms Regulations (ITAR). Please check your state and local laws regarding magazine capacity restrictions.

Freedom Restricted States

If you live in a state that restricts magazine capacity we cannot ship to you unless you are law enforcement or otherwise exempt. If you are exempt from your state's ban please send us a copy of your documentation or official email to [email protected]. Please include your order number.

If you purchase from a ban state and you are NOT exempt, we will cancel your order and charge you a 5% cancellation fee.

Notice

GLOCK® is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H.  Neither Shield Arms nor this site are affiliated in any manner with, or otherwise endorsed by GLOCK, Inc. or GLOCK Ges.m.b.H.  The use of "GLOCK" on this and associated pages on our website is merely to advertise the sale of GLOCK® pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts, visit www.glock.com.

Products specifications
Firearms Manufacturer CZ
Firearms Model CZ P10F / P09, CZ Duty
Installation Help

Not sure how to install this product? Our step-by-step guides and video walkthroughs make it simple.

View Installation Guides →
Customers who bought this item also bought
CZ P10C / P07  +5/4 Magazine Extension - Black

CZ P10C / P07 / Duty +5/4 Magazine Extension

Billet aluminum +5/4 magazine extension for compact CZ magazines. Adds 5 rounds of 9mm or 4 rounds of .40 S&W to the CZ P10C and P07, and takes the 15-round CZ Duty magazine to 20. Allen wrenches included. Made in USA with a lifetime warranty and Spring for Life.
$39.95
Glock® 17/22/34/35/19X/45 +5/4 Mag Extension - Black

Glock 17 +5/4 Magazine Extension

Billet aluminum +5/4 magazine extension for factory full-size Glock magazines. Takes a Glock 17 magazine from 17 to 22 rounds, or a .40 S&W magazine from 15 to 19. Fits the Glock 17, 22, 34, 35, 19X, 45 and 47. +10% power spring and Allen wrenches included. Made in USA with a lifetime warranty and Spring for Life.
$39.95
Replacement Spring for CZ Magazine w/ Shield Arms +5 Extension

Replacement Spring for CZ Magazine w/ Shield Arms +5 Extension

A replacement magazine spring for CZ P10S, P10C / P07 and P10F magazines running a Shield Arms +5 extension. Choose the 12-, 13- or 14-coil version to match your magazine.
$2.95
PMAG® AR/M4 M3, 223 Remington (30 Rounds): 5.56x45 NATO (.223 Remington)

PMAG 30 AR/M4 GEN M3 - 30 rds - 5.56x45mm / .223 Remington

The next-generation PMAG 30 AR/M4 GEN M3 is a 30-round polymer magazine for AR15/M4 compatible weapons chambered in 5.56x45 NATO / .223 Remington.
$14.95
Picture of Glock 19 +5 Pre-Installed 20-Round Magazine

Glock 19 +5 Pre-Installed 20-Round Magazine

A factory Glock 19 magazine with our billet +5 extension and a +10% power spring pre-installed. Holds 20 rounds of 9mm, three more than a factory Glock 17 magazine. Fits Glock 19 Gen 3–6. Lifetime warranty on the extension, plus Spring for Life.
$64.95

FREE SHIPPING FOR ORDERS OVER $100!