S15 +0 Aluminum Base Plate

Manufacturer: Shield Arms
A billet aluminum +0 replacement base plate for the Shield Arms S15 magazine. It has three window cuts for grip and a dot-matrix marking panel, in six anodized colors.
SKU: S15-ALU-BAS
*
  • Not available
  • Not available
  • Not available
  • Not available
  • Not available
  • Not available
Availability: In stock
$24.95
i h
Buy now, pay later Available at checkout on orders over $150
Compatibility

Fits the Shield Arms S15 Magazine Only.

This base plate replaces the standard plastic base plate on a Shield Arms S15 magazine, Gen 1, Gen 2 or Gen 3, for the Glock® 43X and 48. It doesn't fit factory Glock® magazines or other aftermarket magazines. It adds no capacity and comes without a spring; it uses the spring and follower already in your S15. Want more rounds? See the S15 extensions.

What Is the S15 +0 Aluminum Base Plate?

It's a billet aluminum replacement for the plastic base plate on a Shield Arms S15 magazine for the Glock® 43X and 48. It keeps the S15 at 15 rounds and adds three window cuts for grip, one on each side and one on the front, plus a dot-matrix panel on the bottom for marking your magazines. It sits slightly taller than the standard plastic plate. Type II anodized in six colors, machined in Bigfork, Montana, with a lifetime warranty.

  • Capacity: +0, the S15 stays at 15 rounds
  • Fits: Shield Arms S15, Gen 1, Gen 2 and Gen 3
  • Uses: your S15's existing spring and follower
  • Colors: Black, Red, Grey, Mud, ODA Green or Gold
S15 +0 Base Plate

Same 15 Rounds. Billet Instead of Plastic.

The base plate is the part of a magazine that hits the ground, the mag well and the bench. This swaps the S15's plastic plate for billet aluminum with three window cuts, so you have something to grab when you strip or pull the magazine.

It's for S15s you want to keep near flush: carry mags, or a set color-matched to your Shield Arms extensions and magwell. Number them on the dot-matrix panel. When you want more rounds, our extensions go on the same S15.

+0 S15 stays at 15 rounds
3 Window cuts for grip
6 Anodized colors
USA Machined in Bigfork, MT
Features

Small Part, Real Upgrade

  • Billet Aluminum

    Machined from billet aluminum in Bigfork, Montana, with a Type II anodized finish in six colors.

  • Three Window Cuts

    One cut on each side and one on the front give your fingers something to catch when you pull or strip the magazine.

  • Dot-Matrix Panel

    An expanded dot-matrix area on the bottom gives you room to number or mark each magazine.

  • Uses Your Spring

    Installs with the S15's own spring and follower. Nothing else to buy for an S15 running at 15.

One Magazine, Four Sizes

Fifteen Rounds With This Plate.

Run the S15 at 15 with this +0 plate, or swap it for an extension: 17 with the +2, 20 with the +5, 25 with the +10. Every option uses the same S15 and the same steel catch.

Capacity laws vary by state and city. Check yours before you buy.

Installation

Swap the Plate in a Minute

Push the tab on the bottom of the S15 and slide the plastic base plate off, capturing the spring with your thumb. Slide the aluminum plate on until the tab locks. No punch and no tools. Coming off an extension? Put the standard S15 spring back in first; the extension's spring is sized for the extension.

Compare

Base Plate or Extension?

Keep the S15 at 15 with this plate, or add rounds with an extension. All of them are billet aluminum.

Option Spring Colors S15 Rounds
S15 +0 Aluminum (this page) Uses yours 6 15
S15 +0 Plastic Uses yours 2 15
S15 +2 Extension Included 6 17
S15 +5 Extension Included 6 20
S15 +10 Extension Included 3 25

Rather have it ready to load? Every S15 extension also comes pre-installed on a new S15. See the whole S-Series.

Specifications

Capacity +0, the S15 stays at 15 rounds
Fits Shield Arms S15 magazine, Gen 1, Gen 2 and Gen 3
Pistols Glock® 43X and 48
Doesn't fit Factory Glock® magazines, other aftermarket magazines
Uses Your S15's existing spring and follower (no spring included)
Height Slightly taller than the standard S15 plastic base plate
Material Billet aluminum
Finish Type II anodized: Black, Red, Grey, Mud, ODA Green or Gold
Grip Three window cuts: one on each side, one on the front
Marking Expanded dot-matrix panel on the bottom
Install Slides on in place of the existing base plate; no tools
Made in Bigfork, Montana, USA
Warranty Lifetime warranty. No spring is included; the spring in your S15 is covered by Spring for Life.

Six Anodized Colors

Every color is Type II anodized over billet aluminum. Pick yours from the Baseplate Color menu, or match it to your Shield Arms extensions and magwell.

ODA Green was first made for a deployed Special Forces Operational Detachment Alpha team. We still offer it in honor of Special Forces teams around the world and donate a portion of every ODA Green sale to the Green Beret Foundation.

Mud: our Mud anodize shade changed slightly in 2025. Mud items bought before then may not be an exact match to the current shade.

Black Red Grey Mud ODA Green Gold
Questions

S15 +0 Base Plate FAQ

Which magazines does it fit?

The Shield Arms S15, Gen 1, Gen 2 and Gen 3. It doesn't fit factory Glock® magazines or other aftermarket magazines.

Does it add capacity?

No. It's a +0: the S15 holds 15, the same as with its plastic base plate. For more, see the +2, +5 and +10 extensions.

Does it change the magazine's length?

Slightly. The aluminum plate is a little taller than the standard S15 plastic base plate.

Is there a plastic version?

Yes. The S15 +0 Plastic Base Plate also keeps the S15 at 15, with three window cuts, in Red or Grey. It fits Gen 2 and Gen 3 S15s.

Does it come with a spring?

No. It installs with the spring and follower already in your S15.

How do I install it?

Push the tab on the bottom of the S15, slide the old plate off while holding the spring with your thumb, then slide this plate on until the tab locks. See our installation guides for more.

Do I still need a steel mag catch?

Your S15 does, whatever base plate it wears. Every S15 runs on a Shield Arms steel catch such as the DUAL-FIT. If you're already running S15s, you have one.

What's the dot matrix for?

It's a textured panel on the bottom of the plate with room to number or mark your magazines, so you can tell your carry mag from your range mags.

What's ODA Green?

A green anodized finish first made for a deployed Special Forces team. A portion of every ODA Green sale goes to the Green Beret Foundation.

What's covered?

A lifetime warranty against defects in materials and workmanship. The plate has no spring, but the spring in your S15 is covered by Spring for Life.

ODA Green

Used on: magazine extensions, magwells

ODA's (Operational Detachment Alpha) are the boots on the ground operational teams of a Special Forces Group. This color began as a special run for a deployed ODA. In continued support we have decided to continue the color as a standard offering and donate a portion of the proceeds to The Green Beret Foundation. Finish is anodized in green.

QPQ Nitrocarburizing Surface Treatment

Used on: magazines, barrels, slides

QPQ Nitrocarburizing is a type of surface treatment used to enhance the durability and corrosion resistance of metal parts. The process involves heating the metal in a controlled environment, where nitrogen and carbon are introduced to the surface of the metal. This forms a thin layer of a hard compound called "nitrides," which increase the surface hardness of the metal.

During the QPQ Nitrocarburizing process, the metal is immersed in a special salt bath and heated to high temperatures. The salt bath contains a mixture of chemicals that release nitrogen and carbon, which penetrate the surface of the metal. The process is carefully controlled to ensure that the nitrogen and carbon penetrate to a specific depth, creating a uniform layer of nitrides on the metal's surface.

The resulting nitride layer provides many benefits to the metal parts, including increased hardness, wear resistance, and corrosion resistance. This treatment helps to increase the lifespan and durability of metal parts, making them more reliable and long-lasting.

Any “scuffing” you see in the surface finish is completely normal, and will not affect the durability or corrosion resistance of the steel.

Electroless Nickel Plating

Used on: magazines

Silver electroless plating offers superior electrical conductivity and corrosion protection with excellent deposit uniformity and adhesion properties. This bright, reflective finish provides outstanding solderability and contact resistance while maintaining the consistent thickness and coverage that electroless plating processes are known for. Black electroless nickel plating provides these same exceptional deposit properties - including lubricity, hardness, and corrosion resistance - but with a fully conductive and uniform black surface finish that combines superior performance with an attractive dark appearance.

This item is controlled for export by the International Traffic in Arms Regulations (ITAR). Please check your state and local laws regarding magazine capacity restrictions.

Freedom Restricted States

If you live in a state that restricts magazine capacity we cannot ship to you unless you are law enforcement or otherwise exempt. If you are exempt from your state's ban please send us a copy of your documentation or official email to [email protected]. Please include your order number.

If you purchase from a ban state and you are NOT exempt, we will cancel your order and charge you a 5% cancellation fee.

Notice

GLOCK® is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H.  Neither Shield Arms nor this site are affiliated in any manner with, or otherwise endorsed by GLOCK, Inc. or GLOCK Ges.m.b.H.  The use of "GLOCK" on this and associated pages on our website is merely to advertise the sale of GLOCK® pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts, visit www.glock.com.

Products specifications
Firearms Manufacturer Glock
Firearms Model Glock 43X/48
Installation Help

Not sure how to install this product? Our step-by-step guides and video walkthroughs make it simple.

View Installation Guides →
Customers who bought this item also bought
Shield Arms S15 Gen 3 - 15 Round Glock 43X/48 Magazine

S15 Gen 3 15-Round Steel Magazine for Glock 43X / 48

The original steel 15-round magazine for the Glock 43X and 48. The patented S15 fits 15 rounds flush in the grip, with nothing hanging below it. Extends to 17, 20 or 25 rounds. Requires a Shield Arms steel mag catch. Made in USA, with a lifetime warranty and Spring for Life.
$39.95
Shield Arms S15 +2 Magazine Extension - Black

S15 +2 Magazine Extension for Glock 43X / 48

A billet aluminum +2 extension that takes a Shield Arms S15 magazine from 15 to 17 rounds in the Glock 43X/48. The 11-coil plus-power spring is included.
$34.95
Premium S15 Steel Mag Catch for Glock® 43X / 48 - Nitride

Premium S15 Steel Mag Catch for Glock 43X/48

Premium hand-specific steel mag catch for Shield Arms S15 magazines. Enhanced ergonomics with extended knurling, beveled edges for smooth reloads, and increased magazine engagement. Not compatible with OEM magazines. Select left or right hand. Made in USA, lifetime warranty.
$36.95
Shield Arms Carry Magwell - Glock® 43X/48 - Black

Shield Arms Carry Magwell for Glock 43X / 48

A low-profile magwell for the Glock® 43X and 48: faster, more forgiving reloads with minimal added bulk. CNC-machined 6061-T6 aluminum, drop-in install, made in Bigfork, Montana.
$74.95
Shield Arms S15 +5 Magazine Extension - Black

S15 +5 Magazine Extension for Glock 43X / 48

A billet aluminum +5 extension that takes a Shield Arms S15 magazine from 15 to 20 rounds in the Glock 43X/48. The 12-coil power spring is included. Your S15 runs on a Shield Arms steel mag catch.
$39.95

FREE SHIPPING FOR ORDERS OVER $100!