S15 +0 Plastic Base Plate

Manufacturer: Shield Arms
A replacement +0 plastic base plate for Shield Arms S15 Gen 2 and Gen 3 magazines, with three window cuts for grip, in Red or Grey.
SKU: S15-PLA-BAS
*
  • Not available
  • Not available
Availability: In stock
$2.95
i h
Buy now, pay later Available at checkout on orders over $150
Compatibility

Fits S15 Gen 2 and Gen 3 Magazines Only.

This base plate fits Shield Arms S15 magazines, Gen 2 and Gen 3, for the Glock® 43X and 48. It doesn't fit Gen 1 S15s, factory Glock® magazines or other aftermarket magazines. It adds no capacity and comes without a spring; it uses the spring and follower already in your S15. Want more rounds? See the S15 extensions.

What Is the S15 +0 Plastic Base Plate?

It's a replacement plastic base plate for Shield Arms S15 Gen 2 and Gen 3 magazines in the Glock® 43X and 48. It keeps the S15 at 15 rounds, slides on in place of the existing base plate with no tools, and has three window cuts for a better grip when you strip or pull the magazine. It comes in Red or Grey, so you can tell your magazines apart at a glance. Lifetime warranty.

  • Capacity: +0, the S15 stays at 15 rounds
  • Fits: Shield Arms S15, Gen 2 and Gen 3
  • Uses: your S15's existing spring and follower
  • Colors: Red or Grey
S15 +0 Base Plate

A Spare Base Plate in a Color You'll Spot.

The base plate is the part of a magazine that hits the ground, the mag well and the bench. This is a fresh one for your S15: replace one that's cracked or lost, or keep a few on hand.

A Red or Grey plate also marks a magazine at a glance, so your carry mag doesn't get mixed in with the range mags. It's also how you take an S15 back to 15 after running an extension.

+0 S15 stays at 15 rounds
3 Window cuts for grip
2 Colors, Red or Grey
0 Tools to install
Features

Small Part, Easy Swap

  • Keeps the S15 at 15

    No added rounds. A plastic +0 plate in place of the one your S15 came with.

  • Three Window Cuts

    Cutouts in the plate give your fingers something to catch when you pull the magazine or strip it from the pistol.

  • Slides On, No Tools

    Push the tab on the bottom of the S15, slide the old plate off while you hold the spring with your thumb, and slide this one on.

  • Uses Your Spring

    Installs with the S15's own spring and follower. Nothing else to buy for an S15 running at 15.

One Magazine, Four Sizes

Fifteen Rounds With This Plate.

Run the S15 at 15 with this +0 plate, or swap it for an extension: 17 with the +2, 20 with the +5, 25 with the +10. Every option uses the same S15 and the same steel catch.

Capacity laws vary by state and city. Check yours before you buy.

Installation

Swap the Plate in a Minute

Push the tab on the bottom of the S15 and slide the old base plate off, capturing the spring with your thumb. Slide this plate on until the tab locks. No punch and no tools. Coming off an extension? Put the standard S15 spring back in first; the extension's spring is sized for the extension.

Compare

Plastic, Aluminum or Extension?

Keep the S15 at 15 with a plastic or aluminum +0 plate, or add rounds with an extension.

Option Material Colors S15 Rounds
S15 +0 Plastic (this page) Plastic 2 15
S15 +0 Aluminum Billet aluminum 6 15
S15 +2 Extension Billet aluminum 6 17
S15 +5 Extension Billet aluminum 6 20

Want 25? See the S15 +10 Extension. See the whole S-Series.

Specifications

Capacity +0, the S15 stays at 15 rounds
Fits Shield Arms S15 magazine, Gen 2 and Gen 3
Pistols Glock® 43X and 48
Doesn't fit S15 Gen 1, factory Glock® magazines, other aftermarket magazines
Uses Your S15's existing spring and follower (no spring included)
Material Plastic
Colors Red or Grey
Grip Three window cuts
Install Slides on in place of the existing base plate; no tools
Made in USA
Warranty Lifetime warranty. No spring is included; the spring in your S15 is covered by Spring for Life.

Two Colors

Pick Red or Grey from the Color menu. Running more than one S15? A different color on each makes it easy to tell your carry mag from your spares.

Red Grey
Questions

S15 +0 Plastic Base Plate FAQ

Which magazines does it fit?

Shield Arms S15 Gen 2 and Gen 3 magazines. It doesn't fit Gen 1 S15s, factory Glock® magazines or other aftermarket magazines.

Does it add capacity?

No. It's a +0: the S15 holds 15, the same as with its standard base plate. For more, see the +2, +5 and +10 extensions.

Does it come with a spring?

No. It installs with the spring and follower already in your S15.

How do I install it?

Push the tab on the bottom of the S15, slide the old plate off while holding the spring with your thumb, then slide this plate on until the tab locks. See our installation guides for more.

Can I take my S15 back to 15 after running an extension?

Yes. Remove the extension, put a standard S15 spring back in, and slide this plate on. The extension's spring is longer and is sized for the extra rounds.

Plastic or aluminum?

Both keep the S15 at 15. The S15 +0 Aluminum Base Plate is billet aluminum, sits slightly taller, has a dot-matrix panel for marking, and comes in six anodized colors. It also fits Gen 1 S15s.

Do I still need a steel mag catch?

Your S15 does, whatever base plate it wears. Every S15 runs on a Shield Arms steel catch such as the DUAL-FIT. If you're already running S15s, you have one.

What colors does it come in?

Red or Grey. Pick yours from the Color menu on this page.

What's covered?

A lifetime warranty against defects in materials and workmanship. The plate has no spring, but the spring in your S15 is covered by Spring for Life.

ODA Green

Used on: magazine extensions, magwells

ODA's (Operational Detachment Alpha) are the boots on the ground operational teams of a Special Forces Group. This color began as a special run for a deployed ODA. In continued support we have decided to continue the color as a standard offering and donate a portion of the proceeds to The Green Beret Foundation. Finish is anodized in green.

QPQ Nitrocarburizing Surface Treatment

Used on: magazines, barrels, slides

QPQ Nitrocarburizing is a type of surface treatment used to enhance the durability and corrosion resistance of metal parts. The process involves heating the metal in a controlled environment, where nitrogen and carbon are introduced to the surface of the metal. This forms a thin layer of a hard compound called "nitrides," which increase the surface hardness of the metal.

During the QPQ Nitrocarburizing process, the metal is immersed in a special salt bath and heated to high temperatures. The salt bath contains a mixture of chemicals that release nitrogen and carbon, which penetrate the surface of the metal. The process is carefully controlled to ensure that the nitrogen and carbon penetrate to a specific depth, creating a uniform layer of nitrides on the metal's surface.

The resulting nitride layer provides many benefits to the metal parts, including increased hardness, wear resistance, and corrosion resistance. This treatment helps to increase the lifespan and durability of metal parts, making them more reliable and long-lasting.

Any “scuffing” you see in the surface finish is completely normal, and will not affect the durability or corrosion resistance of the steel.

Electroless Nickel Plating

Used on: magazines

Silver electroless plating offers superior electrical conductivity and corrosion protection with excellent deposit uniformity and adhesion properties. This bright, reflective finish provides outstanding solderability and contact resistance while maintaining the consistent thickness and coverage that electroless plating processes are known for. Black electroless nickel plating provides these same exceptional deposit properties - including lubricity, hardness, and corrosion resistance - but with a fully conductive and uniform black surface finish that combines superior performance with an attractive dark appearance.

This item is controlled for export by the International Traffic in Arms Regulations (ITAR). Please check your state and local laws regarding magazine capacity restrictions.

Freedom Restricted States

If you live in a state that restricts magazine capacity we cannot ship to you unless you are law enforcement or otherwise exempt. If you are exempt from your state's ban please send us a copy of your documentation or official email to [email protected]. Please include your order number.

If you purchase from a ban state and you are NOT exempt, we will cancel your order and charge you a 5% cancellation fee.

Notice

GLOCK® is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H.  Neither Shield Arms nor this site are affiliated in any manner with, or otherwise endorsed by GLOCK, Inc. or GLOCK Ges.m.b.H.  The use of "GLOCK" on this and associated pages on our website is merely to advertise the sale of GLOCK® pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts, visit www.glock.com.

Products specifications
Firearms Manufacturer Glock
Firearms Model Glock 43X/48
Installation Help

Not sure how to install this product? Our step-by-step guides and video walkthroughs make it simple.

View Installation Guides →
Customers who bought this item also bought
S-Series Dual Fit Mag Catch

DUAL-FIT Mag Catch for Glock 43X / 48

Steel mag catch for the Glock 43X and 48 that runs Shield Arms S-Series magazines and Glock’s factory 15-round steel magazines on one catch. Black nitride, made in the USA. Pick the hand you shoot with. Right-handed puts the button on the left side of the frame, under your right thumb, like a factory 43X/48. Left-handed puts it on the right side.
$19.95
[S15-ALU-BAS-BLK] S15 +0 Aluminum Base Plate (Black)

S15 +0 Aluminum Base Plate

A billet aluminum +0 replacement base plate for the Shield Arms S15 magazine. It has three window cuts for grip and a dot-matrix marking panel, in six anodized colors.
$24.95
Shield Arms S15 +5 Magazine Extension - Black

S15 +5 Magazine Extension for Glock 43X / 48

A billet aluminum +5 extension that takes a Shield Arms S15 magazine from 15 to 20 rounds in the Glock 43X/48. The 12-coil power spring is included. Your S15 runs on a Shield Arms steel mag catch.
$39.95

FREE SHIPPING FOR ORDERS OVER $100!