DS-Series Standard Mag Catch for Glock 17 / 19

Manufacturer: Shield Arms
The steel mag catch Shield Arms DS18 and DS20 magazines run on. Fits the Glock 17, 19, 34, 45, 47 and 19X in Gen 3 or Gen 4/5/6 versions. Made in the USA.
*
Availability: In stock
$19.95
i h
Buy now, pay later Available at checkout on orders over $150
Compatibility

Fits the Glock® 17, 19, 34, 45, 47 and 19X. Choose Gen 3 or Gen 4/5/6.

This steel catch replaces the polymer mag catch in double-stack 9mm Glocks and runs Shield Arms DS18 and DS20 magazines. Glock® changed the catch between generations, so pick the version that matches your pistol; the Glock® 45, 47 and 19X always take Gen 4/5/6. It doesn't fit the Glock® 43, 43X or 48. For those, see the DUAL-FIT and Z-Series catches.

What Is the DS-Series Standard Mag Catch?

The DS-Series Standard Mag Catch is the steel magazine catch Shield Arms DS18 and DS20 magazines are built to run on. It replaces the factory polymer catch in the Glock® 17, 19, 34, 45, 47 and 19X in a one-time install with basic tools, and comes in two versions: Gen 3, or Gen 4/5/6. It's ambidextrous, so one catch works for right- and left-handed shooters, and one catch runs both DS-Series magazines. Black nitride finish, made in the USA, lifetime warranty.

  • Fits: Glock® 17, 19, 34, 45, 47 and 19X
  • Runs: Shield Arms DS18 and DS20 magazines
  • Versions: Gen 3 or Gen 4/5/6, ambidextrous
  • Made in: USA, lifetime warranty
DS-Series

One Swap. Every DS-Series Mag After That.

DS-Series magazines are steel, and the catch your Glock® shipped with is polymer. We believe the best path to long-term reliability is steel on steel or polymer on polymer, so the DS18 and DS20 are built to lock into this steel catch.

Install it once and every DS18 or DS20 you add is ready to run. Buy it on its own for a second pistol, or when you already own DS-Series mags.

6 Double-stack Glock models
2 Mags: DS18 and DS20
Ambi Right- or left-handed
USA Made, lifetime warranty
Features

Built for the DS-Series

  • Steel, Black Nitride

    Steel on steel with DS-Series magazines for long-term wear, in a black nitride finish. Made in the USA.

  • Runs the DS18 and DS20

    One catch runs both magazines. Pick the version for your pistol, not the mag.

  • Ambidextrous

    One catch works for right- and left-handed shooters. There's no separate left-hand version to order.

  • One-Time Install

    Swaps in for the factory polymer catch with basic tools. Our installation guides walk you through it.

Choose Your Version

Gen 3 or Gen 4/5/6?

Gen 4, Gen 5 and Gen 6 Glocks are marked with their generation on the slide. A Glock® 17, 19 or 34 with no marking is almost always a Gen 3. The 45, 47 and 19X were never made as Gen 3 pistols.

Your Pistol Choose This Version
Glock® 17, 19 or 34, Gen 3 Gen 3
Glock® 17, 19 or 34, Gen 4 / 5 / 6 Gen 4/5/6
Glock® 45, 47 or 19X Gen 4/5/6
First DS-Series Mag?

Get the Catch in a Starter Kit

Buying your first DS-Series magazine? Each Starter Kit pairs one magazine with this catch, in the version you choose. The DS18 Starter Kit is for the Glock® 19; the DS20 Starter Kit is for the 17, 34, 45, 47 and 19X. You only need one catch per pistol.

Get It in a Kit

Kits That Include This Catch

Every kit below includes the DS-Series Standard catch, Gen 3 or Gen 4/5/6.

Kit Mags Steel Catch
DS18 Starter Kit 1 × DS18 ✓
DS18 Combo 1 3 × DS18 ✓
DS20 Starter Kit 1 × DS20 ✓
DS20 Combo 1 3 × DS20 ✓

See all DS-Series combos.

Specifications

Fits Glock® 17, 19, 34, 45, 47 and 19X (9mm), Gen 3 through Gen 6 where the model exists
Versions Gen 3; Gen 4/5/6 (Glock® 45, 47 and 19X take Gen 4/5/6)
Hand Ambidextrous
Doesn't fit Glock® 43, 43X and 48
Magazines Shield Arms DS18 and DS20
Factory polymer mags Not recommended (steel on polymer adds wear)
Replaces Factory Glock® polymer mag catch
Material Steel
Finish Black nitride
Install One-time swap with basic tools; see installation guides
Made in USA
Warranty Lifetime warranty

Black Nitride

The DS-Series Standard catch comes in black nitride, in both the Gen 3 and Gen 4/5/6 versions.

Black Nitride
Questions

DS-Series Mag Catch FAQ

Do I need a steel catch to run DS-Series mags?

Yes. DS-Series magazines are steel and the factory Glock® catch is polymer. We believe the best path to long-term reliability is steel on steel or polymer on polymer, so the DS18 and DS20 are built to run on this catch.

Which version do I need?

Gen 3 for a Gen 3 Glock® 17, 19 or 34. Gen 4/5/6 for a Gen 4, 5 or 6 Glock® 17, 19 or 34, and for any Glock® 45, 47 or 19X.

How do I tell which generation I have?

Gen 4, Gen 5 and Gen 6 Glocks are marked with their generation on the slide. A Glock® 17, 19 or 34 with no marking is almost always a Gen 3. Still unsure? Contact our support team before you order.

Does one catch run both the DS18 and DS20?

Yes. Choose the version that matches your pistol's generation, not the magazine. A Glock® 19 with this catch runs the DS18 and the DS20.

Does it work for left-handed shooters?

Yes. The catch is ambidextrous, so the same part works for right- and left-handed shooters. Just choose Gen 3 or Gen 4/5/6.

Will my factory polymer mags still work?

We don't recommend it. Running factory polymer magazines against a steel catch adds wear to the magazine over time. Once it's installed, run steel magazines like the DS18 and DS20.

How hard is installation?

Swapping a Glock® mag catch is a common at-home job with basic tools. Our installation guides walk you through it.

Catch on its own, or a Starter Kit?

Buying your first DS-Series magazine? A DS18 or DS20 Starter Kit is the simplest way in. Buy the catch on its own for a second pistol, or if you already own DS-Series mags.

Does it fit my Glock® 43X or 48?

No. For the 43X and 48, see the DUAL-FIT Mag Catch. For the single-stack Glock® 43, see the Z-Series catches.

What's covered by the warranty?

Our lifetime warranty covers defects in materials and workmanship.

Products specifications
Firearms Manufacturer Glock
Firearms Model Glock 17/45 Gen 6, Glock 17/22 Gen 4/5, Glock 17/22 Gen 3, Glock 19 Gen 6, Glock 19/23 Gen 4/5, Glock 19/23 Gen 3
Installation Help

Not sure how to install this product? Our step-by-step guides and video walkthroughs make it simple.

View Installation Guides →
Customers who bought this item also bought
DS-18 Magazine for Glock 19

DS18 Magazine for Glock 19

An 18-round steel magazine for the Glock 19, three more than factory with only a minimal increase in length. Runs with a DS-Series steel mag catch, sold separately or in the DS18 Starter Kit.
$41.95
S15 +10 Pre-installed Magazine Extension - Black

S15 +10 Pre-Installed Magazine for Glock 43X / 48

An S15 Gen 3 magazine with the black anodized S15 +10 extension and a 15-coil power spring already installed. That’s 25 rounds for the Glock 43X/48, ready to load.
$74.95
DS-20 Magazine for Glock 17

DS20 Magazine for Glock 17

A 20-round steel magazine for the Glock 17, 34, 45, 47 and 19X, three more than factory with only a minimal increase in length. Runs with a DS-Series steel mag catch, sold separately or in the DS20 Starter Kit.
$41.95
DS20 Combo 1 - Gen 3 Glock 17

DS20 Combo 1 for Glock 17

Three DS20 20-round steel magazines and the DS-Series steel mag catch they run on, in a Gen 3 or Gen 4/5/6 version. A full Glock 17 setup with three more rounds per mag than factory.
$124.95

FREE SHIPPING FOR ORDERS OVER $100!