DS20 Starter Kit for Glock 17

Manufacturer: Shield Arms
One DS20 20-round steel magazine and the DS-Series steel mag catch it runs on, in a Gen 3 or Gen 4/5/6 version. Three more rounds than factory in your Glock 17, 34, 45, 47 or 19X.
*
Availability: In stock
$49.95
i h
Buy now, pay later Available at checkout on orders over $150
Compatibility

Fits the Glock® 17, 34, 45, 47 and 19X. The Steel Catch Is Included.

The DS20 fits Glock® 17-length grip frames, Gen 3 through Gen 6, and also runs in a Glock® 19 with the base extending below the grip. It's a steel magazine, so the kit includes our DS-Series Standard steel mag catch in place of the factory polymer catch. Choose Gen 3 or Gen 4/5/6 to match your pistol; the Glock® 45, 47 and 19X always take Gen 4/5/6. Carrying a Glock® 19? See the DS18 Starter Kit.

Stippled or modified grips: DS-Series magazines may fit tight in a stippled or modified grip. We know of no reliability issues, but in those pistols the magazine may not drop free.

What Is the DS20 Starter Kit?

The DS20 Starter Kit is the simplest way to start running DS-Series magazines in a Glock® 17, 34, 45, 47 or 19X: one Shield Arms DS20 20-round steel magazine and the DS-Series Standard steel mag catch it runs on, in a Gen 3 or Gen 4/5/6 version. The DS20 holds three more rounds than the 17-round factory magazine with only a minimal increase in overall length, and has an over-insertion stop stamped into the steel body. Made in the USA, with a lifetime warranty and Spring for Life.

  • In the kit: (1) DS20 magazine, (1) DS-Series steel mag catch
  • Fits: Glock® 17, 34, 45, 47 and 19X, Gen 3–6
  • Capacity: 20 rounds, +3 over factory
  • Catch: Gen 3 or Gen 4/5/6, your choice
Try It

One Mag. One Catch. Twenty Rounds.

The DS20 fits 20 rounds of 9mm in a magazine sized for the Glock® 17. Steel walls are thinner than a polymer mag, and that's where the extra three rounds come from.

Because it's steel, it runs on a steel catch. The Starter Kit puts both in one order, so you don't buy the magazine first and sort out the catch later. Swap the catch once, and every DS20 you add after that is ready to go.

20 Rounds of 9mm
+3 Over factory
1 Steel catch included
USA Made, with Spring for Life
In the Kit

Everything You Need to Run a DS20

  • DS20 Magazine

    20 rounds in a steel body, three more than the factory 17, with only a minimal increase in length.

  • DS-Series Steel Catch

    The DS-Series Standard catch in black nitride, Gen 3 or Gen 4/5/6. Ambidextrous, runs the DS20 and DS18. Made in the USA.

  • Stamped Over-Insertion Stop

    Pressed into the steel to set seating depth on every reload. Glock® builds one into its factory mags; most aftermarket mags leave it out.

  • Add Mags Later

    The catch stays in the pistol, so every DS20 after this one is a standalone magazine.

DS20 vs. Factory

Three More Rounds in a Glock® 17.

In a Glock® 17, 34, 45, 47 or 19X, the DS20 holds 20 against the factory 17. Glock® 19 owners can run it too, as a 20-round reload that extends below the grip.

Running a Glock® 19 day to day? The DS18 holds 18 in the shorter grip. Capacity laws vary by state and city. Check yours before you buy.

Why a Steel Catch

Steel Mags Run on a Steel Catch

The DS20 is steel and the catch your Glock® shipped with is polymer. We believe the best path to long-term reliability is steel on steel or polymer on polymer, so this kit includes our DS-Series Standard steel catch. Pick Gen 3 for a Gen 3 Glock® 17 or 34, and Gen 4/5/6 for a Gen 4, 5 or 6 pistol or any Glock® 45, 47 or 19X. It's a one-time install, and our installation guides walk you through it.

Choose Your Catch

Gen 3 or Gen 4/5/6?

Glock® changed the mag catch between generations, so pick the catch that matches your pistol, not the magazine. Gen 4, Gen 5 and Gen 6 Glocks are marked with their generation on the slide. A Glock® 17, 19 or 34 with no marking is almost always a Gen 3.

Your Pistol Choose This Catch
Glock® 17, 19 or 34, Gen 3 Gen 3
Glock® 17, 19 or 34, Gen 4 / 5 / 6 Gen 4/5/6
Glock® 45, 47 or 19X Gen 4/5/6
Compare

Pick Your Setup

Start with one DS20 and the catch, or get three now. Already running the catch? Add magazines on their own.

Kit DS20 Mags Steel Catch
DS20 Starter Kit (this page) 1 ✓
DS20 Combo 1 3 ✓
DS20 Magazine 1 —

Carrying a Glock® 19? The DS18 Starter Kit is the same setup with an 18-round DS18. See all DS-Series combos.

Specifications

In the kit (1) DS20 magazine, (1) DS-Series Standard steel mag catch
Compatible pistols Glock® 17, 34, 45, 47 and 19X, Gen 3 through Gen 6 where the model exists; also runs in a Glock® 19, extending below the grip
Capacity 20 rounds of 9mm (+3 over the 17-round factory magazine)
Length Minimal increase over a factory Glock® 17 magazine
Magazine body Steel, with an over-insertion stop stamped into the body
Mag catch DS-Series Standard steel catch, black nitride, ambidextrous, Gen 3 or Gen 4/5/6; runs DS20 and DS18 magazines; factory polymer mags not recommended
Made in USA (magazine and catch)
Warranty Lifetime warranty plus Spring for Life on the magazine
Questions

DS20 Starter Kit FAQ

Which pistols does it fit?

The Glock® 17, 34, 45, 47 and 19X, Gen 3 through Gen 6. For the Glock® 43X and 48, see the S-Series. For the Glock® 43, see the Z-Series.

Will the DS20 work in my Glock® 19?

Yes. It runs in a Glock® 19 with the base extending below the grip, so it works as a 20-round reload. For a setup sized to the 19's grip, see the DS18 Starter Kit.

Which catch do I choose?

Gen 3 for a Gen 3 Glock® 17 or 34. Gen 4/5/6 for a Gen 4, 5 or 6 Glock® 17 or 34, and for any Glock® 45, 47 or 19X, which were never made as Gen 3 pistols. Still unsure? Contact our support team before you order.

How hard is the catch install?

Swapping a Glock® mag catch is a common at-home job with basic tools. Our installation guides walk you through it.

Will it drop free in a stippled grip?

It may not. DS-Series magazines can fit tight in a stippled or modified grip. We know of no reliability issues, but in those pistols the magazine may not drop free when you press the catch.

Will my factory polymer mags still work?

They'll run with the steel catch, but we don't recommend it. Steel on polymer adds wear to the magazine over time.

I already have the catch. Do I need another kit?

No. The catch stays in your pistol, so add DS20 magazines on their own. Want a full set with the catch? See DS20 Combo 1.

What is an over-insertion stop?

A stop stamped into the steel body that keeps the magazine from seating too deep in the grip, so it locks in at the same depth on every reload.

Are DS20 extensions available?

Not yet. We're engineering extensions built for DS-Series magazines. They'll be sold individually and in DS-Series combos.

Can I buy it in my state?

Magazine capacity laws vary by state and city. Check yours before you order.

What's covered?

A lifetime warranty against defects in materials and workmanship, plus Spring for Life: free replacement springs for as long as you own the magazine.

Products specifications
Firearms Manufacturer Glock
Firearms Model Glock 17/45 Gen 6, Glock 17/22 Gen 4/5, Glock 17/22 Gen 3
Installation Help

Not sure how to install this product? Our step-by-step guides and video walkthroughs make it simple.

View Installation Guides →
Customers who bought this item also bought
DS-20 Magazine for Glock 17

DS20 Magazine for Glock 17

A 20-round steel magazine for the Glock 17, 34, 45, 47 and 19X, three more than factory with only a minimal increase in length. Runs with a DS-Series steel mag catch, sold separately or in the DS20 Starter Kit.
$41.95
DS18 Starter Kit for Glock 19 — Gen 3

DS18 Starter Kit for Glock 19

One DS18 18-round steel magazine and the DS-Series steel mag catch it runs on, in a Gen 3 or Gen 4/5/6 version. Three more rounds than factory in your Glock 19.
$49.95
DS20 Combo 1 - Gen 3 Glock 17

DS20 Combo 1 for Glock 17

Three DS20 20-round steel magazines and the DS-Series steel mag catch they run on, in a Gen 3 or Gen 4/5/6 version. A full Glock 17 setup with three more rounds per mag than factory.
$124.95
S20 - 20 Round Glock 43X/48 Magazine

S20 20-Round Magazine for Glock 43X / 48

A 20-round, one-piece steel 9mm magazine for the Glock 43X and 48, built as the high-capacity spare next to a flush S15. Requires a Shield Arms steel mag catch (sold separately).
$44.95 $39.95

FREE SHIPPING FOR ORDERS OVER $100!