S15 +10 Magazine Extension for Glock 43X / 48

Takes a Shield Arms S15 magazine from 15 to 25 rounds in the Glock 43X/48. Billet 6061 aluminum with a 15-coil power spring and easy-access floor plate.
SKU: SA-S15-ME-10
*
  • Not available
  • Not available
  • Not available
Availability: In stock
$39.95
i h
Buy now, pay later Available at checkout on orders over $150
Compatibility

Fits the Shield Arms S15 Magazine Only.

The S15 +10 replaces the base pad on a Shield Arms S15 magazine, Gen 2 or Gen 3, for the Glock® 43X and 48. It doesn't fit factory Glock® magazines or other aftermarket magazines. Like every S15, it runs on a Shield Arms steel mag catch such as our DUAL-FIT. Capacity laws vary by state and city; check yours before you order.

What Is the S15 +10 Magazine Extension?

The S15 +10 is a billet aluminum base pad extension that takes a Shield Arms S15 magazine from 15 rounds of 9mm to 25 in the Glock® 43X and 48. It's the largest S15 extension, comes with a 15-coil power spring, has an easy-access floor plate for cleaning, and fits S15 Gen 2 and Gen 3 magazines. Black, Red or ODA Green anodize. Machined in Bigfork, Montana, with a lifetime warranty and Spring for Life.

  • Adds: 10 rounds (S15 from 15 to 25)
  • Fits: Shield Arms S15 Gen 2 and Gen 3
  • Included: 15-coil power spring
  • Colors: Black, Red or ODA Green
S15 +10

25 Rounds From a Slimline Glock®.

The S15 holds 15 flush in the slim 43X/48 grip. The +10 is the big one: it swaps in for the base pad and takes the same magazine to 25 rounds.

It's a range mag, a home magazine and the reload that holds the most. A common setup is a flush S15 in the pistol and a 25 on the belt or in the bag. Take the +10 off and put the standard pad and spring back, and the magazine carries flush at 15 again.

25 Rounds with an S15
+10 Largest S15 extension
15 Coil power spring, included
USA Machined in Bigfork, MT
Features

Built to Feed All 25

  • 15-Coil Power Spring

    A longer power spring comes in the package, sized to keep all 25 rounds feeding.

  • Easy-Access Floor Plate

    Open the floor plate to clean or service the magazine without taking the extension off.

  • Index Cuts

    Cuts in the extension body give your fingers a grip when you pull the mag from a pouch.

  • Billet Aluminum

    Machined from billet 6061 aluminum in Bigfork, Montana, with a Type II anodized finish.

One Magazine, Four Sizes

Flush at 15. This One Makes 25.

Carry the S15 flush, or swap the base pad for an extension: 17 with the +2, 20 with the +5, 25 with this +10. Every size uses the same S15 and the same steel catch.

Capacity laws vary by state and city. Check yours before you buy.

Installation

Replaces the S15 Base Pad

Remove the S15 base pad, swap in the included 15-coil power spring and install the extension. Follow the included instructions for safe, correct installation, and find step-by-step help on our installation guides page. Rather skip the install? Order the S15 +10 Pre-Installed and it arrives on a new S15, ready to load.

Compare

Pick Your S15 Extension

Every S15 extension comes with its own spring and fits any S15 Gen 2 or Gen 3.

Option What You Get Spring Rounds
S15 +10 Extension (this page) Extension 15-coil power 25
S15 +10 Pre‑Installed S15 with +10 fitted 15-coil power 25
S15 +5 Extension Extension 12-coil power 20
S15 +2 Extension Extension 11-coil plus‑power 17

Want 20 in one piece? See the S20. See the whole S-Series.

Specifications

Adds 10 rounds of 9mm (S15 from 15 to 25)
Fits Shield Arms S15 magazine, Gen 2 and Gen 3
Pistols Glock® 43X and 48, all generations
Doesn't fit Factory Glock® magazines, other aftermarket magazines
Included 15-coil power spring
Material Billet 6061 aluminum
Finish Type II anodized: Black, Red or ODA Green
Floor plate Easy access, no need to remove the extension for cleaning
Grip Index cuts for pulling from a pouch
Mag catch S15 runs on a Shield Arms steel catch, such as the DUAL-FIT
Magwells Works with Shield Arms Carry and Premium magwells for the 43X/48, and most aftermarket flared magwells
Made in Bigfork, Montana, USA
Warranty Lifetime warranty plus Spring for Life

Three Anodized Colors

Every color is Type II anodized over billet 6061 aluminum. Pick yours from the Color menu.

ODA Green was first made for a deployed Special Forces Operational Detachment Alpha team. We still offer it in honor of Special Forces teams around the world and donate a portion of every ODA Green sale to the Green Beret Foundation.

Black Red ODA Green
Questions

S15 +10 Extension FAQ

Will it fit my factory Glock® 43X or 48 magazine?

No. The S15 +10 fits only the Shield Arms S15, Gen 2 or Gen 3. It doesn't fit factory or other aftermarket magazines.

Do I need a steel mag catch?

Your S15 does. Every S15 runs on a Shield Arms steel catch such as the DUAL-FIT. If you're already running S15s, you have one.

How do I install it?

Remove the S15 base pad, swap in the included 15-coil power spring and install the extension. Follow the included instructions and our installation guides.

Do I have to remove it to clean the magazine?

No. The easy-access floor plate opens to the spring and follower with the extension still on the magazine.

Can I carry a 25-round S15 concealed?

The +10 extends well below the grip, so it isn't a concealment magazine. A common setup is a flush S15 in the pistol and the 25 as a reload, range or home magazine.

+2, +5 or +10?

The +2 holds 17 and adds the least length. The +5 holds 20. The +10 holds 25, the most of any S15 setup.

Will it fit my magwell?

Yes. It works with our Carry and Premium Magwells for the 43X/48 and most aftermarket flared magwells.

Extension or pre-installed?

Buy the extension to upgrade an S15 you already own. Buy the pre-installed version to get it already fitted to a new S15.

What's ODA Green?

A green anodized finish first made for a deployed Special Forces team. A portion of every ODA Green sale goes to the Green Beret Foundation.

What's covered?

A lifetime warranty against defects in materials and workmanship, plus free replacement springs through Spring for Life.

ODA Green

Used on: magazine extensions, magwells

ODA's (Operational Detachment Alpha) are the boots on the ground operational teams of a Special Forces Group. This color began as a special run for a deployed ODA. In continued support we have decided to continue the color as a standard offering and donate a portion of the proceeds to The Green Beret Foundation. Finish is anodized in green.

QPQ Nitrocarburizing Surface Treatment

Used on: magazines, barrels, slides

QPQ Nitrocarburizing is a type of surface treatment used to enhance the durability and corrosion resistance of metal parts. The process involves heating the metal in a controlled environment, where nitrogen and carbon are introduced to the surface of the metal. This forms a thin layer of a hard compound called "nitrides," which increase the surface hardness of the metal.

During the QPQ Nitrocarburizing process, the metal is immersed in a special salt bath and heated to high temperatures. The salt bath contains a mixture of chemicals that release nitrogen and carbon, which penetrate the surface of the metal. The process is carefully controlled to ensure that the nitrogen and carbon penetrate to a specific depth, creating a uniform layer of nitrides on the metal's surface.

The resulting nitride layer provides many benefits to the metal parts, including increased hardness, wear resistance, and corrosion resistance. This treatment helps to increase the lifespan and durability of metal parts, making them more reliable and long-lasting.

Any “scuffing” you see in the surface finish is completely normal, and will not affect the durability or corrosion resistance of the steel.

Electroless Nickel Plating

Used on: magazines

Silver electroless plating offers superior electrical conductivity and corrosion protection with excellent deposit uniformity and adhesion properties. This bright, reflective finish provides outstanding solderability and contact resistance while maintaining the consistent thickness and coverage that electroless plating processes are known for. Black electroless nickel plating provides these same exceptional deposit properties - including lubricity, hardness, and corrosion resistance - but with a fully conductive and uniform black surface finish that combines superior performance with an attractive dark appearance.

This item is controlled for export by the International Traffic in Arms Regulations (ITAR). Please check your state and local laws regarding magazine capacity restrictions.

Freedom Restricted States

If you live in a state that restricts magazine capacity we cannot ship to you unless you are law enforcement or otherwise exempt. If you are exempt from your state's ban please send us a copy of your documentation or official email to [email protected]. Please include your order number.

If you purchase from a ban state and you are NOT exempt, we will cancel your order and charge you a 5% cancellation fee.

Notice

GLOCK® is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H.  Neither Shield Arms nor this site are affiliated in any manner with, or otherwise endorsed by GLOCK, Inc. or GLOCK Ges.m.b.H.  The use of "GLOCK" on this and associated pages on our website is merely to advertise the sale of GLOCK® pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts, visit www.glock.com.

Products specifications
Firearms Manufacturer Glock
Firearms Model Glock 43X/48
Installation Help

Not sure how to install this product? Our step-by-step guides and video walkthroughs make it simple.

View Installation Guides →
Customers who bought this item also bought
Shield Arms S15 Gen 3 - 15 Round Glock 43X/48 Magazine

S15 Gen 3 15-Round Steel Magazine for Glock 43X / 48

The original steel 15-round magazine for the Glock 43X and 48. The patented S15 fits 15 rounds flush in the grip, with nothing hanging below it. Extends to 17, 20 or 25 rounds. Requires a Shield Arms steel mag catch. Made in USA, with a lifetime warranty and Spring for Life.
$39.95
Shield Arms S15 +5 Magazine Extension - Black

S15 +5 Magazine Extension for Glock 43X / 48

A billet aluminum +5 extension that takes a Shield Arms S15 magazine from 15 to 20 rounds in the Glock 43X/48. The 12-coil power spring is included. Your S15 runs on a Shield Arms steel mag catch.
$39.95
S15 Combo Pack 1 - Nitrocarb

S15 Combo Pack 1 for Glock 43X / 48

A full Glock® 43X / 48 carry setup: three S15 Gen 3 15-round steel magazines and a DUAL-FIT black nitride steel mag catch. 45 rounds, all flush. Made in the USA.
$121.95
Shield Arms S15 +2 Magazine Extension - Black

S15 +2 Magazine Extension for Glock 43X / 48

A billet aluminum +2 extension that takes a Shield Arms S15 magazine from 15 to 17 rounds in the Glock 43X/48. The 11-coil plus-power spring is included.
$34.95
Shield Arms Carry Magwell - Glock® 43X/48 - Black

Shield Arms Carry Magwell for Glock 43X / 48

A low-profile magwell for the Glock® 43X and 48: faster, more forgiving reloads with minimal added bulk. CNC-machined 6061-T6 aluminum, drop-in install, made in Bigfork, Montana.
$74.95

FREE SHIPPING FOR ORDERS OVER $100!