S15 Combo Pack 4 for Glock 43X / 48

Manufacturer: Shield Arms
Three S15 Gen 3 15-round magazines, two S15 +5 extensions and the DUAL-FIT steel mag catch for the Glock 43X and 48. Carry one flush at 15 and run two 20-round reloads; catch is right- or left-handed.
*
  • Not available
  • Not available
  • Not available
  • Not available
*
Availability: In stock
$199.95
i h
Buy now, pay later Available at checkout on orders over $150
Compatibility

Fits the Glock® 43X and 48. The Steel Catch Is Included.

This combo fits the Glock® 43X and 48, all generations. The S15 is a steel magazine, and the polymer mag catch the pistol ships with isn't compatible with it, so the combo includes our DUAL-FIT steel catch, right- or left-handed. Install it once and every magazine in the box runs on it. Capacity laws vary by state and city; check yours before you order 20-round configurations.

What Is the S15 Combo Pack 4?

S15 Combo Pack 4 is a Glock® 43X / 48 setup for carry and the range: three Shield Arms S15 Gen 3 15-round steel magazines, two S15 +5 extensions and the DUAL-FIT steel mag catch they run on, right- or left-handed. Carry one S15 flush at 15 and put the +5s on the other two for a pair of 20-round reloads, 55 rounds in all. The magazines are made in the USA and the extensions are machined in Bigfork, Montana, with a lifetime warranty and Spring for Life.

  • In the combo: (3) S15 Gen 3 mags, (2) +5 extensions, (1) DUAL-FIT catch
  • Fits: Glock® 43X and 48, all generations
  • Capacity: 15 flush, 20 with a +5; 55 total
  • Catch: right- or left-handed, your choice
Carry + Range

One to Carry. Two 20s to Reload.

The S15 is the magazine that put Shield Arms on the map: 15 rounds, flush, in the slim Glock® 43X and 48. Combo Pack 4 builds a full setup around it, with two +5 extensions in the box.

Keep a flush S15 in the pistol and run the two 20-rounders as reloads on the belt or at the range. Want all three flush for a few days? The extensions come off. The DUAL-FIT catch comes in the box, so you swap it once and everything runs.

3 S15 Gen 3 magazines
2 S15 +5 extensions
55 Rounds, 15 + 20 + 20
USA Made, with Spring for Life
In the Combo

Everything for a 15 / 20 / 20 Setup

  • Three S15 Gen 3 Mags

    15 rounds each, flush with the grip, in a steel body built on our patented staggered geometry.

  • Two S15 +5 Extensions

    Billet 6061 aluminum, machined in Bigfork, Montana. Each comes with its 12-coil power spring and takes an S15 to 20.

  • DUAL-FIT Mag Catch

    Black nitride steel, right- or left-handed. Also runs Glock®'s factory 15-round steel mags. Made in the USA.

  • Set It Up Your Way

    Each extension fits any S15. Run 15 / 20 / 20, go all flush, or move the +5s as your carry changes.

One Magazine, Four Sizes

Flush at 15. Two of Them at 20.

Carry the S15 flush, or swap the base pad for an extension: 17 with the +2, 20 with the +5, 25 with the +10. This combo includes two +5s.

Want the third mag at 20 too? Add an S15 +5 Extension. Capacity laws vary by state and city. Check yours before you buy.

Why a Steel Catch

Steel Mags Run on a Steel Catch

The S15 is steel and the catch your 43X/48 shipped with is polymer, and the two aren't compatible. This combo includes our DUAL-FIT steel catch, which also runs Glock®'s factory 15-round steel mags. It's a one-time install, and our installation guides cover the catch and the extensions. Another manufacturer's catch may cause reliability issues.

Compare

Pick Your Setup

Every kit below includes the steel catch. Pick the magazine and extension mix that fits how you carry.

Kit S15 Mags Steel Catch Extensions
S15 Combo Pack 4 (this page) 3 ✓ 2 × +5
S15 Starter Kit 1 ✓ —
S15 Combo Pack 1 3 ✓ —
S15 Combo Pack 8 3 ✓ 3 × +5, installed
S15 Combo Pack 9 3 ✓ 3 × +2, installed

Want a magwell too? S15 Magwell Combo 2 is three S15s, a +5, the catch and a Carry Magwell. See all S-Series combos.

Specifications

In the combo (3) S15 Gen 3 magazines, (2) S15 +5 extensions with springs, (1) DUAL-FIT steel mag catch
Compatible pistols Glock® 43X and 48, all generations
Capacity 15 rounds of 9mm flush, 20 with a +5 extension; 55 total as 15 / 20 / 20
Magazine body Steel, patented staggered geometry, flush fit in the 43X/48 grip
Magazine finish Nitrocarb (QPQ nitrocarburized), Silver Nickel or Black Nickel (electroless nickel)
Extensions S15 +5, billet 6061 aluminum, Type II anodized, 12-coil power spring, easy-access floor plate, index cuts
Mag catch DUAL-FIT steel catch, black nitride, right- or left-handed; also runs Glock® factory 15-round steel mags
Magwells Works with Shield Arms Carry and Premium magwells for the 43X/48
Made in USA; extensions machined in Bigfork, Montana
Warranty Lifetime warranty plus Spring for Life on the magazines and extensions

Three Magazine Finishes

All three magazines come in the finish you pick from the Magazine Finish menu. The DUAL-FIT catch comes in black nitride, right- or left-handed.

Nitrocarb Silver Nickel Black Nickel
Questions

S15 Combo Pack 4 FAQ

Which pistols does it fit?

The Glock® 43X and 48, all generations. For the single-stack Glock® 43, see the Z-Series. For the Glock® 19 and 17, see the DS-Series.

Do I need anything else?

No. The combo includes the DUAL-FIT catch every magazine runs on and the springs for both extensions. Pick right-handed (button on the left side of the frame, like the factory setup) or left-handed when you order.

How do I install the extensions?

Remove the S15 base pad, swap in the 12-coil power spring that comes with the extension, and install the extension. Follow the included instructions and our installation guides.

How hard is the catch install?

It's a one-time swap with basic tools and no gunsmithing. Our installation guides walk you through it.

Can I carry a 20-round S15 concealed?

The +5 extends below the grip, so it's less discreet than a flush S15. A common setup is a flush S15 in the pistol and the 20s as reloads.

Will the catch run Glock®'s factory 15-round mags?

Yes. The DUAL-FIT also runs Glock®'s factory 15-round steel 43X/48 magazines, so you can mix them with your S15s.

Will my polymer 10-round mags still work?

They'll run with the steel catch, but we don't recommend it for regular use. Steel on polymer adds wear to the magazine over time.

Combo Pack 4 or Combo Pack 1?

Combo Pack 1 is three S15s and the catch, all flush. Combo Pack 4 adds two +5 extensions, so two of the three can run at 20.

Does it work in a grip-chopped pistol?

Yes. A 43X or 48 converted by our S10 Grip Chop Service runs the S15 with or without extensions. Add a Grip Chop Sleeve to restore full grip length on a flush S15.

What is Spring for Life?

Free replacement springs for as long as you own your S15s and extensions. See the program.

What's covered?

A lifetime warranty against defects in materials and workmanship, plus Spring for Life on the magazines and extensions.

ODA Green

Used on: magazine extensions, magwells

ODA's (Operational Detachment Alpha) are the boots on the ground operational teams of a Special Forces Group. This color began as a special run for a deployed ODA. In continued support we have decided to continue the color as a standard offering and donate a portion of the proceeds to The Green Beret Foundation. Finish is anodized in green.

QPQ Nitrocarburizing Surface Treatment

Used on: magazines, barrels, slides

QPQ Nitrocarburizing is a type of surface treatment used to enhance the durability and corrosion resistance of metal parts. The process involves heating the metal in a controlled environment, where nitrogen and carbon are introduced to the surface of the metal. This forms a thin layer of a hard compound called "nitrides," which increase the surface hardness of the metal.

During the QPQ Nitrocarburizing process, the metal is immersed in a special salt bath and heated to high temperatures. The salt bath contains a mixture of chemicals that release nitrogen and carbon, which penetrate the surface of the metal. The process is carefully controlled to ensure that the nitrogen and carbon penetrate to a specific depth, creating a uniform layer of nitrides on the metal's surface.

The resulting nitride layer provides many benefits to the metal parts, including increased hardness, wear resistance, and corrosion resistance. This treatment helps to increase the lifespan and durability of metal parts, making them more reliable and long-lasting.

Any “scuffing” you see in the surface finish is completely normal, and will not affect the durability or corrosion resistance of the steel.

Electroless Nickel Plating

Used on: magazines

Silver electroless plating offers superior electrical conductivity and corrosion protection with excellent deposit uniformity and adhesion properties. This bright, reflective finish provides outstanding solderability and contact resistance while maintaining the consistent thickness and coverage that electroless plating processes are known for. Black electroless nickel plating provides these same exceptional deposit properties - including lubricity, hardness, and corrosion resistance - but with a fully conductive and uniform black surface finish that combines superior performance with an attractive dark appearance.

Products specifications
Firearms Manufacturer Glock
Firearms Model Glock 43X/48
Installation Help

Not sure how to install this product? Our step-by-step guides and video walkthroughs make it simple.

View Installation Guides →
Customers who bought this item also bought
SA Premium Magwell - Glock 43X/48 - Black

Premium Magwell for Glock 43X / 48

Our widest magwell for the Glock 43X and 48, CNC-machined from 6061-T6 aluminum in Bigfork, Montana. Drop-in install with included hardware; runs S15, S20 and factory mags.
$79.95
Shield Arms S15 Gen 3 - 15 Round Glock 43X/48 Magazine

S15 Gen 3 15-Round Steel Magazine for Glock 43X / 48

The original steel 15-round magazine for the Glock 43X and 48. The patented S15 fits 15 rounds flush in the grip, with nothing hanging below it. Extends to 17, 20 or 25 rounds. Requires a Shield Arms steel mag catch. Made in USA, with a lifetime warranty and Spring for Life.
$39.95
Premium S15 Steel Mag Catch for Glock® 43X / 48 - Nitride

Premium S15 Steel Mag Catch for Glock 43X/48

Premium hand-specific steel mag catch for Shield Arms S15 magazines. Enhanced ergonomics with extended knurling, beveled edges for smooth reloads, and increased magazine engagement. Not compatible with OEM magazines. Select left or right hand. Made in USA, lifetime warranty.
$36.95
S15 Starter Kit - Nitrocarb

S15 Starter Kit for Glock 43X / 48

Everything you need to run an S15 in your Glock 43X or 48: one S15 Gen 3 15-round steel magazine and a DUAL-FIT black nitride steel mag catch. Made in the USA.
$44.95
Shield Arms Carry Magwell - Glock® 43X/48 - Black

Shield Arms Carry Magwell for Glock 43X / 48

A low-profile magwell for the Glock® 43X and 48: faster, more forgiving reloads with minimal added bulk. CNC-machined 6061-T6 aluminum, drop-in install, made in Bigfork, Montana.
$74.95

FREE SHIPPING FOR ORDERS OVER $100!