Glock 26 / 27 +5/4 Magazine Extension

Billet aluminum +5/4 magazine extension for factory Glock 26 and 27 magazines, all generations. Takes a Glock 26 magazine from 10 to 15 rounds (Glock 19 capacity) or a Glock 27 from 9 to 13. +10% power spring and Allen wrenches included. Made in USA with a lifetime warranty and Spring for Life.
SKU: G26-ME-5
*
  • Not available
  • Not available
  • Not available
  • Not available
  • Not available
  • Not available
Availability: In stock
$39.95
i h
Buy now, pay later Available at checkout on orders over $150
Compatibility

Fits Factory Glock® 26 and 27 Magazines

This extension fits factory Glock® 26 and 27 magazines, all generations. It fits OEM Glock® magazines only, not aftermarket magazines. Running a Glock® 19 or 23? See the Glock® 19 Extension. For full-size magazines, see the Glock® 17 Extension.

What Is the Shield Arms Glock® 26/27 +5/4 Magazine Extension?

It replaces the factory base plate on a Glock® 26 or 27 magazine and adds 5 rounds of 9mm or 4 rounds of .40 S&W. A Glock® 26 magazine goes from 10 to 15, the same as a factory Glock® 19 magazine. It's machined from billet 6061 aluminum, comes with a +10% power spring, has an easy-access floor plate for cleaning without removing the extension, and is made in the USA with a lifetime warranty and Spring for Life.

  • Capacity: +5 in 9mm, +4 in .40 S&W
  • Fits: Glock® 26 and 27 magazines, all generations
  • Material: billet 6061 aluminum, Type II anodized
  • Included: +10% power spring, Allen wrenches
  • Also sold: pre-installed on a Glock® 26 magazine
Glock® 26 +5

Glock® 19 Capacity From Your Glock® 26

The Glock® 26 carries small because its magazine is short, and that's where it gives up rounds: 10 in the factory magazine. This extension takes it to 15, the same as a factory Glock® 19 magazine, from the pistol and holster you already own. On a Glock® 27, the 9-round .40 S&W magazine goes to 13.

A common setup: carry the flush 10 for concealment and a 15-round spare on your belt. It's the same extension that's in service with law enforcement agencies around the world, and the +10% power spring comes in the box.

Fitment

Which Pistols It Fits

  • Glock® 26

    All generations, 9mm. The 10-round factory magazine goes to 15.

  • Glock® 27

    All generations, .40 S&W. The 9-round factory magazine goes to 13.

  • Compact or Full-Size?

    The 19 and 23 take the Glock® 19 Extension. The 17, 22, 34, 35, 19X and 45 take the Glock® 17 Extension.

  • Single-Stack Slimline?

    The Glock® 43 has its own Glock® 43 Extension. For the 43X and 48, see our S15 magazine.

Capacity

15 Rounds From a Subcompact

Five more rounds in 9mm, four in .40 S&W. The magazine stays a factory Glock® magazine. Only the base plate changes.

Factory magazine capacity shown for comparison. Capacity laws vary by state and city. Check yours before you buy.

Features

Machined From Billet, Built to Service

  • +10% Power Spring

    A heavier spring comes in the box to keep the added rounds feeding.

  • Easy-Access Floor Plate

    Reach the spring and follower for cleaning or service without taking the extension off the magazine.

  • Index Cuts

    Cuts on the extension body give you a better grip when you pull the magazine from a pouch.

  • Billet 6061 Aluminum

    Machined from billet aluminum and finished with a Type II anodize. Made in the USA.

Installation

Replaces the Factory Base Plate

The power spring and the Allen wrenches you need come in the package. Follow the included instructions for safe, correct installation. Step-by-step help is also on our installation guides page. Rather skip the install? Order the Glock® 26 +5 Pre-Installed and it arrives on a factory magazine, ready to load.

Specifications

Adds 5 rounds of 9mm or 4 rounds of .40 S&W
Fits Glock® 26 and 27 magazines, all generations
9mm capacity Glock® 26: 10 to 15
.40 S&W capacity Glock® 27: 9 to 13
Magazine Factory Glock® magazines only
Doesn't fit Glock® 19/23, 17-pattern, 43 and aftermarket magazines
Included +10% power spring, Allen wrenches
Material Billet 6061 aluminum
Finish Type II anodized
Floor plate Easy access, no need to remove the extension for cleaning
Grip Index cuts for pulling from a pouch
Magwells Works with most aftermarket flared magwells
Made in USA
Warranty Lifetime warranty plus Spring for Life

A Note on Mud Anodizing

Our Mud anodize shade changed slightly in 2025. Mud items bought before then may not be an exact match to the current shade.

Questions

Glock® 26 +5 Extension FAQ

Does it fit every generation of Glock® 26 and 27?

Yes. It fits factory Glock® 26 and 27 magazines from all generations.

How much capacity does it add?

A Glock® 26 magazine goes from 10 to 15, the same as a factory Glock® 19 magazine. A Glock® 27 magazine goes from 9 to 13.

Does it work with aftermarket magazines?

No. It fits factory Glock® magazines only.

Do I need a new spring?

It's in the box. Every extension comes with a +10% power spring, and Spring for Life replaces it free whenever it wears.

Do I need any tools to install it?

No. The Allen wrenches you need are included. Step-by-step help is on our installation guides page.

Will it fit my magwell?

It works with most aftermarket flared magwells.

Do I have to remove it to clean the magazine?

No. The easy-access floor plate opens to the spring and follower with the extension still on the magazine.

Extension or pre-installed?

Buy the extension to upgrade magazines you already own. Buy the Glock® 26 +5 Pre-Installed to get it already fitted to a new factory magazine.

What's covered?

A lifetime warranty against defects, plus free replacement springs for life through Spring for Life.

ODA Green

Used on: magazine extensions, magwells

ODA's (Operational Detachment Alpha) are the boots on the ground operational teams of a Special Forces Group. This color began as a special run for a deployed ODA. In continued support we have decided to continue the color as a standard offering and donate a portion of the proceeds to The Green Beret Foundation. Finish is anodized in green.

QPQ Nitrocarburizing Surface Treatment

Used on: magazines, barrels, slides

QPQ Nitrocarburizing is a type of surface treatment used to enhance the durability and corrosion resistance of metal parts. The process involves heating the metal in a controlled environment, where nitrogen and carbon are introduced to the surface of the metal. This forms a thin layer of a hard compound called "nitrides," which increase the surface hardness of the metal.

During the QPQ Nitrocarburizing process, the metal is immersed in a special salt bath and heated to high temperatures. The salt bath contains a mixture of chemicals that release nitrogen and carbon, which penetrate the surface of the metal. The process is carefully controlled to ensure that the nitrogen and carbon penetrate to a specific depth, creating a uniform layer of nitrides on the metal's surface.

The resulting nitride layer provides many benefits to the metal parts, including increased hardness, wear resistance, and corrosion resistance. This treatment helps to increase the lifespan and durability of metal parts, making them more reliable and long-lasting.

Any “scuffing” you see in the surface finish is completely normal, and will not affect the durability or corrosion resistance of the steel.

Electroless Nickel Plating

Used on: magazines

Silver electroless plating offers superior electrical conductivity and corrosion protection with excellent deposit uniformity and adhesion properties. This bright, reflective finish provides outstanding solderability and contact resistance while maintaining the consistent thickness and coverage that electroless plating processes are known for. Black electroless nickel plating provides these same exceptional deposit properties - including lubricity, hardness, and corrosion resistance - but with a fully conductive and uniform black surface finish that combines superior performance with an attractive dark appearance.

This item is controlled for export by the International Traffic in Arms Regulations (ITAR). Please check your state and local laws regarding magazine capacity restrictions.

Freedom Restricted States

If you live in a state that restricts magazine capacity we cannot ship to you unless you are law enforcement or otherwise exempt. If you are exempt from your state's ban please send us a copy of your documentation or official email to [email protected]. Please include your order number.

If you purchase from a ban state and you are NOT exempt, we will cancel your order and charge you a 5% cancellation fee.

Notice

GLOCK® is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H.  Neither Shield Arms nor this site are affiliated in any manner with, or otherwise endorsed by GLOCK, Inc. or GLOCK Ges.m.b.H.  The use of "GLOCK" on this and associated pages on our website is merely to advertise the sale of GLOCK® pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts, visit www.glock.com.

Products specifications
Firearms Manufacturer Glock
Firearms Model Glock 26/27 Gen 3
Installation Help

Not sure how to install this product? Our step-by-step guides and video walkthroughs make it simple.

View Installation Guides →
Customers who bought this item also bought
Glock® 19/23 +5/4 Magazine Extension - Black

Glock 19 / 23 +5/4 Magazine Extension

Billet aluminum +5/4 magazine extension for factory Glock 19 and 23 magazines, Gen 3–6. Takes a Glock 19 magazine from 15 to 20 rounds, three more than a factory Glock 17 magazine, or a Glock 23 from 13 to 17. +10% power spring and Allen wrenches included. Made in USA with a lifetime warranty and Spring for Life.
$39.95
Glock® 17/22/34/35/19X/45 +5/4 Mag Extension - Black

Glock 17 +5/4 Magazine Extension

Billet aluminum +5/4 magazine extension for factory full-size Glock magazines. Takes a Glock 17 magazine from 17 to 22 rounds, or a .40 S&W magazine from 15 to 19. Fits the Glock 17, 22, 34, 35, 19X, 45 and 47. +10% power spring and Allen wrenches included. Made in USA with a lifetime warranty and Spring for Life.
$39.95
CZ P10C / P07  +5/4 Magazine Extension - Black

CZ P10C / P07 / Duty +5/4 Magazine Extension

Billet aluminum +5/4 magazine extension for compact CZ magazines. Adds 5 rounds of 9mm or 4 rounds of .40 S&W to the CZ P10C and P07, and takes the 15-round CZ Duty magazine to 20. Allen wrenches included. Made in USA with a lifetime warranty and Spring for Life.
$39.95
Glock 26 +5 Pre-Installed Magazine Extension

Glock 26 +5 Pre-Installed Magazine Extension

A factory Glock 26 magazine with a Shield Arms +5 billet extension and +10% power spring already installed: 15 rounds of 9mm, ready to load on your factory mag catch.
$67.95
S15 Combo Pack 1 - Nitrocarb

S15 Combo Pack 1 for Glock 43X / 48

A full Glock® 43X / 48 carry setup: three S15 Gen 3 15-round steel magazines and a DUAL-FIT black nitride steel mag catch. 45 rounds, all flush. Made in the USA.
$121.95

FREE SHIPPING FOR ORDERS OVER $100!