Glock 26 +5 Pre-Installed Magazine Extension

A factory Glock 26 magazine with a Shield Arms +5 billet extension and +10% power spring already installed: 15 rounds of 9mm, ready to load on your factory mag catch.
SKU: G26-ME-5IN
*
  • Not available
  • Not available
  • Not available
  • Not available
  • Not available
  • Not available
Availability: In stock
$67.95
i h
Buy now, pay later Available at checkout on orders over $150
Compatibility

Fits the Glock® 26

This is a complete factory Glock® 26 9mm magazine with our +5 extension already installed. It runs in the Glock® 26, Gen 3 and newer. Running a Glock® 27 in .40 S&W? The Glock® 26/27 Extension fits your magazines. For a Glock® 19, see the Glock® 19 +5 Pre-Installed.

What Is the Shield Arms Glock® 26 +5 Pre-Installed Magazine?

It's a factory 10-round Glock® 26 magazine with our +5 extension and a +10% power spring already installed, so it holds 15 rounds of 9mm, the same as a factory Glock® 19 magazine, and arrives ready to load. It works with the pistol's factory mag catch. The extension is machined from billet 6061 aluminum in Bigfork, Montana, has an easy-access floor plate for cleaning, and comes with a lifetime warranty and Spring for Life.

  • Capacity: 15 rounds of 9mm (10 + 5)
  • Fits: Glock® 26, Gen 3 and newer
  • In the box: factory Glock® 26 magazine, +5 extension installed, +10% power spring
  • Also sold: extension only, for magazines you already own
Glock® 26 +5 Pre-Installed

Fifteen Rounds. Same Glock® 26.

The Glock® 26 carries small because its magazine is short, and that's where it gives up rounds: 10 in the factory magazine. This one holds 15, and it shows up assembled: a genuine Glock® magazine body, our billet +5 extension and a +10% power spring. Nothing to install. Load it and go.

A common setup: carry the flush 10 in the pistol for concealment and a 15-round spare on your belt. Same pistol, same holster, same factory mag catch.

15 Rounds of 9mm
+5 Over the factory 10
0 Parts to install
USA Extension machined in Bigfork, MT
Features

What You're Getting

  • Genuine Glock® Magazine

    A factory Glock® 26 magazine body, the same one that ships with the pistol.

  • Installed and Sprung

    The +5 extension comes fitted, with a +10% power spring installed to keep all 15 rounds feeding.

  • Easy-Access Floor Plate

    Reach the spring and follower for cleaning or service without taking the extension off the magazine.

  • Index Cuts

    Cuts on the billet 6061 extension give you a better grip when you pull the magazine from a pouch.

Capacity

Glock® 19 Capacity From a Subcompact

Five more rounds than the factory Glock® 26 magazine, and the same 15 as a factory Glock® 19 magazine. Already own magazines? The extension upgrades them to the same 15.

Factory magazine capacity shown for comparison. Capacity laws vary by state and city. Check yours before you buy.

Already Own Mags?

Upgrade the Ones You Have

The Glock® 26/27 +5/4 Extension is the same extension sold on its own. It replaces the factory base plate on magazines you already own, and the power spring and Allen wrenches come in the package. It also takes a Glock® 27 magazine from 9 rounds of .40 S&W to 13.

Compare

Pre-Installed or Extension Only?

Get a complete magazine ready to load, or upgrade the factory magazines you already own.

Option Magazine Rounds Ready to Load
Glock® 26 +5 Pre-Installed (this page) Included 15 ✓
Glock® 26/27 +5/4 Extension Your factory mag 15 (9mm), 13 (.40) —
Glock® 19 +5 Pre-Installed Included 20 ✓

Extensions for Glock®, CZ, SIG, S&W and Springfield: see every mag extension.

Specifications

Capacity 15 rounds, 9mm (10 + 5)
Fits Glock® 26, Gen 3 and newer
Doesn't fit Glock® 27 and other .40 S&W pistols (use the Glock® 26/27 Extension on your own magazines)
Magazine Factory Glock® 26 magazine, 9mm
Extension +5, pre-installed
Spring +10% power spring, installed
Mag catch Factory Glock® catch; no change needed
Extension material Billet 6061 aluminum
Finish Type II anodized
Floor plate Easy access, no need to remove the extension for cleaning
Grip Index cuts for pulling from a pouch
Magwells Works with most aftermarket flared magwells
Made in Extension machined in Bigfork, Montana, USA
Warranty Lifetime warranty on the extension, plus Spring for Life

A Note on Mud Anodizing

Our Mud anodize shade changed slightly in 2025. Mud items bought before then may not be an exact match to the current shade.

Questions

Glock® 26 +5 Pre-Installed FAQ

Is this a genuine Glock® magazine?

Yes. The magazine body is a factory Glock® 26 magazine. We install our +5 extension and a +10% power spring before it ships.

Will it work in my Glock® 27?

No. This is a 9mm magazine. The Glock® 26/27 Extension takes your factory Glock® 27 magazines from 9 rounds of .40 S&W to 13.

Do I need a new mag catch?

No. It's a factory polymer Glock® magazine, so it runs on the pistol's factory catch.

Can I run it alongside my 10-round magazines?

Yes. It's a Glock® 26 magazine, so it swaps freely with your factory 10-rounders. A common setup is the flush 10 in the pistol and a 15 as the spare.

Why the +10% power spring?

Five extra rounds means more spring compression. The heavier spring keeps feeding consistent from the first round to the 15th.

Pre-installed or extension only?

Pre-installed gets you a complete 15-round magazine. Already own Glock® 26 magazines? The extension upgrades them, and it also fits the Glock® 27.

Can I get more than 15 rounds in a Glock® 26?

Longer Glock® 19 and 17 magazines also run in a Glock® 26; they just extend well below the grip. The Glock® 19 +5 Pre-Installed holds 20.

Will it fit my magwell?

It works with most aftermarket flared magwells.

Do I have to remove the extension to clean it?

No. The easy-access floor plate opens to the spring and follower with the extension still on the magazine.

What's covered?

A lifetime warranty on the extension against defects, plus free replacement springs for life through Spring for Life. Wear out the spring, and we replace it free.

ODA Green

Used on: magazine extensions, magwells

ODA's (Operational Detachment Alpha) are the boots on the ground operational teams of a Special Forces Group. This color began as a special run for a deployed ODA. In continued support we have decided to continue the color as a standard offering and donate a portion of the proceeds to The Green Beret Foundation. Finish is anodized in green.

QPQ Nitrocarburizing Surface Treatment

Used on: magazines, barrels, slides

QPQ Nitrocarburizing is a type of surface treatment used to enhance the durability and corrosion resistance of metal parts. The process involves heating the metal in a controlled environment, where nitrogen and carbon are introduced to the surface of the metal. This forms a thin layer of a hard compound called "nitrides," which increase the surface hardness of the metal.

During the QPQ Nitrocarburizing process, the metal is immersed in a special salt bath and heated to high temperatures. The salt bath contains a mixture of chemicals that release nitrogen and carbon, which penetrate the surface of the metal. The process is carefully controlled to ensure that the nitrogen and carbon penetrate to a specific depth, creating a uniform layer of nitrides on the metal's surface.

The resulting nitride layer provides many benefits to the metal parts, including increased hardness, wear resistance, and corrosion resistance. This treatment helps to increase the lifespan and durability of metal parts, making them more reliable and long-lasting.

Any “scuffing” you see in the surface finish is completely normal, and will not affect the durability or corrosion resistance of the steel.

Electroless Nickel Plating

Used on: magazines

Silver electroless plating offers superior electrical conductivity and corrosion protection with excellent deposit uniformity and adhesion properties. This bright, reflective finish provides outstanding solderability and contact resistance while maintaining the consistent thickness and coverage that electroless plating processes are known for. Black electroless nickel plating provides these same exceptional deposit properties - including lubricity, hardness, and corrosion resistance - but with a fully conductive and uniform black surface finish that combines superior performance with an attractive dark appearance.

This item is controlled for export by the International Traffic in Arms Regulations (ITAR). Please check your state and local laws regarding magazine capacity restrictions.

Freedom Restricted States

If you live in a state that restricts magazine capacity we cannot ship to you unless you are law enforcement or otherwise exempt. If you are exempt from your state's ban please send us a copy of your documentation or official email to [email protected]. Please include your order number.

If you purchase from a ban state and you are NOT exempt, we will cancel your order and charge you a 5% cancellation fee.

Notice

GLOCK® is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H.  Neither Shield Arms nor this site are affiliated in any manner with, or otherwise endorsed by GLOCK, Inc. or GLOCK Ges.m.b.H.  The use of "GLOCK" on this and associated pages on our website is merely to advertise the sale of GLOCK® pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts, visit www.glock.com.

Products specifications
Firearms Manufacturer Glock
Firearms Model Glock 26/27 Gen 3
Installation Help

Not sure how to install this product? Our step-by-step guides and video walkthroughs make it simple.

View Installation Guides →
Customers who bought this item also bought
Shield Arms S15 +2 Magazine Extension - Black

S15 +2 Magazine Extension for Glock 43X / 48

A billet aluminum +2 extension that takes a Shield Arms S15 magazine from 15 to 17 rounds in the Glock 43X/48. The 11-coil plus-power spring is included.
$34.95
Picture of Glock 19 +5 Pre-Installed 20-Round Magazine

Glock 19 +5 Pre-Installed 20-Round Magazine

A factory Glock 19 magazine with our billet +5 extension and a +10% power spring pre-installed. Holds 20 rounds of 9mm, three more than a factory Glock 17 magazine. Fits Glock 19 Gen 3–6. Lifetime warranty on the extension, plus Spring for Life.
$64.95
S15 +5 Pre-Installed Magazine Extension - Black

S15 +5 Pre-Installed 20-Round Magazine for Glock 43X / 48

Our patented S15 Gen 3 magazine with the +5 extension and a 12-coil power spring pre-installed. Holds 20 rounds of 9mm in the Glock 43X and 48 and arrives ready to load. Remove the extension and swap the spring to carry it flush at 15. Requires a Shield Arms steel mag catch. Made in USA.
$74.95
Shield Arms S15 Gen 3 - 15 Round Glock 43X/48 Magazine

S15 Gen 3 15-Round Steel Magazine for Glock 43X / 48

The original steel 15-round magazine for the Glock 43X and 48. The patented S15 fits 15 rounds flush in the grip, with nothing hanging below it. Extends to 17, 20 or 25 rounds. Requires a Shield Arms steel mag catch. Made in USA, with a lifetime warranty and Spring for Life.
$39.95
Glock® 17+5 Pre-Installed Magazine Extension - Black

Glock 17 +5 Pre-Installed 22-Round Magazine

A factory Glock 17 magazine with our billet +5 extension and a +10% power spring pre-installed. Holds 22 rounds of 9mm and runs in the Glock 17, 34, 47, 19X and 45. Lifetime warranty on the extension, plus Spring for Life.
$64.95

FREE SHIPPING FOR ORDERS OVER $100!