Replacement Spring for S15 Magazine (5 Pack)

Manufacturer: Shield Arms
Five 10-coil replacement springs for the Shield Arms S15 magazine at 15 rounds. Refresh a set of S15s at once, or keep spares on hand.
SKU: S15-SPR-10-5PACK
Availability: In stock
$13.95
i h
Buy now, pay later Available at checkout on orders over $150
Compatibility

For the S15 at 15 Rounds, With Its Standard Base Pad.

This pack is five standard 10-coil springs for Shield Arms S15 magazines for the Glock® 43X and 48, running flush at 15 rounds with a +0 base pad. They aren't for an S15 wearing an extension; each extension uses its own longer spring. It doesn't fit factory Glock® magazines.

What Is the S15 Replacement Spring 5-Pack?

It's five 10-coil replacement magazine springs for the Shield Arms S15 in the Glock® 43X and 48, enough to refresh five magazines at once. Each is the spring for an S15 at its standard 15 rounds, built for high round counts, and it's our recommended replacement for owners of early Gen 1 S15s. They install with no tools. Also sold single and in a 3-pack.

  • In the package: (5) 10-coil S15 springs
  • Fits: Shield Arms S15 at 15 rounds (+0 base pad)
  • Not for: S15s with a +2, +5 or +10 extension
  • Also sold: single and in a 3-pack
S15 Spring 5-Pack

Fresh Springs for a Stack of S15s.

The spring is the one part of a magazine that wears with use. Load it, shoot it, leave it loaded in a carry mag, and over thousands of rounds it loses some of its push. A fresh spring brings the magazine back to full strength.

If you run a set of S15s hard, their springs wear at about the same rate. The 5-pack lets you refresh five at once, or keep spares in the range bag. Spring for Life still replaces worn springs for free by mail; this is for when you want them on hand now.

5 S15 springs
15 Rounds, standard S15
0 Tools to install
10 Coils each
Features

When to Reach for a New Spring

  • High Round Counts

    Built for longevity under heavy use. Swap a whole set of range and training mags on a schedule.

  • Early Gen 1 S15s

    Our recommended replacement if you own an early first-generation S15.

  • Back to 15

    Taking an extension off? The extension's spring is longer, so put a standard S15 spring back in with the +0 base pad.

  • No Tools

    Push the tab on the bottom of the S15, slide the base pad off, and swap the spring. No punch needed.

Spring for Life

Wear It Out. We'll Replace It.

Every Shield Arms magazine and extension is covered by Spring for Life: send us a worn spring and we'll send you a new one, free, for life. This pack is for when you want five on hand right away for a stack of S15s.

Compare

Which S15 Spring Do You Need?

Match the spring to how the magazine is set up. A flush S15 takes the 10-coil spring; extensions use their own.

Spring For Coils Springs
S15 Spring Flush S15 10 1
S15 Spring 3‑Pack Flush S15 10 3
S15 Spring 5‑Pack (this page) Flush S15 10 5
+2 Extension Spring S15 +2 11 1

Running a +5 or +10? Each extension comes with its own spring, and Spring for Life covers it. See the whole S-Series.

Specifications

In the package (5) S15 magazine springs
Coils 10
Fits Shield Arms S15 magazine at 15 rounds, with a +0 base pad
Pistols Glock® 43X and 48
Not for S15s with a +2, +5 or +10 extension; factory Glock® magazines
Recommended for High round counts; owners of early Gen 1 S15s
Install No tools; push the tab and slide the base pad off
Made in USA
Coverage Lifetime warranty plus Spring for Life
Questions

S15 Spring 5-Pack FAQ

Which magazines does it fit?

The Shield Arms S15 running at 15 rounds with a +0 base pad. They don't fit factory Glock® magazines.

Can I use it with an extension?

No. Each S15 extension uses its own longer spring, sized for the extra rounds, and comes with it. For a +2, see the +2 extension spring.

Why buy springs if Spring for Life is free?

Spring for Life replaces worn springs by mail, at no charge. Buy a pack when you want spares on hand now, without the wait.

When should I replace my spring?

Signs include rounds not feeding reliably or the slide not locking back on an empty magazine. High-round-count training mags wear their springs fastest.

I have an early Gen 1 S15. Should I replace the spring?

This is our recommended replacement spring for early Gen 1 S15s. While you're in there, the S15 Replacement Plastic Gen 1 set replaces the follower, locking plate and base pad.

How do I install it?

Push the tab on the bottom of the S15 and slide the base pad off, holding the spring with your thumb. Ease the old spring out, put the new one in with the follower and locking plate, and slide the base pad back on until the tab locks. See our installation guides for more.

Can I buy a single spring or a different pack?

Yes. Get a single S15 spring or the 3-pack.

What's covered?

A lifetime warranty against defects in materials and workmanship, and the springs are covered by Spring for Life like every Shield Arms magazine spring.

ODA Green

Used on: magazine extensions, magwells

ODA's (Operational Detachment Alpha) are the boots on the ground operational teams of a Special Forces Group. This color began as a special run for a deployed ODA. In continued support we have decided to continue the color as a standard offering and donate a portion of the proceeds to The Green Beret Foundation. Finish is anodized in green.

QPQ Nitrocarburizing Surface Treatment

Used on: magazines, barrels, slides

QPQ Nitrocarburizing is a type of surface treatment used to enhance the durability and corrosion resistance of metal parts. The process involves heating the metal in a controlled environment, where nitrogen and carbon are introduced to the surface of the metal. This forms a thin layer of a hard compound called "nitrides," which increase the surface hardness of the metal.

During the QPQ Nitrocarburizing process, the metal is immersed in a special salt bath and heated to high temperatures. The salt bath contains a mixture of chemicals that release nitrogen and carbon, which penetrate the surface of the metal. The process is carefully controlled to ensure that the nitrogen and carbon penetrate to a specific depth, creating a uniform layer of nitrides on the metal's surface.

The resulting nitride layer provides many benefits to the metal parts, including increased hardness, wear resistance, and corrosion resistance. This treatment helps to increase the lifespan and durability of metal parts, making them more reliable and long-lasting.

Any “scuffing” you see in the surface finish is completely normal, and will not affect the durability or corrosion resistance of the steel.

Electroless Nickel Plating

Used on: magazines

Silver electroless plating offers superior electrical conductivity and corrosion protection with excellent deposit uniformity and adhesion properties. This bright, reflective finish provides outstanding solderability and contact resistance while maintaining the consistent thickness and coverage that electroless plating processes are known for. Black electroless nickel plating provides these same exceptional deposit properties - including lubricity, hardness, and corrosion resistance - but with a fully conductive and uniform black surface finish that combines superior performance with an attractive dark appearance.

This item is controlled for export by the International Traffic in Arms Regulations (ITAR). Please check your state and local laws regarding magazine capacity restrictions.

Freedom Restricted States

If you live in a state that restricts magazine capacity we cannot ship to you unless you are law enforcement or otherwise exempt. If you are exempt from your state's ban please send us a copy of your documentation or official email to [email protected]. Please include your order number.

If you purchase from a ban state and you are NOT exempt, we will cancel your order and charge you a 5% cancellation fee.

Notice

GLOCK® is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H.  Neither Shield Arms nor this site are affiliated in any manner with, or otherwise endorsed by GLOCK, Inc. or GLOCK Ges.m.b.H.  The use of "GLOCK" on this and associated pages on our website is merely to advertise the sale of GLOCK® pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts, visit www.glock.com.

Products specifications
Firearms Manufacturer Glock
Firearms Model Glock 43
Installation Help

Not sure how to install this product? Our step-by-step guides and video walkthroughs make it simple.

View Installation Guides →
Customers who bought this item also bought
Shield Arms S15 Gen 3 - 15 Round Glock 43X/48 Magazine

S15 Gen 3 15-Round Steel Magazine for Glock 43X / 48

The original steel 15-round magazine for the Glock 43X and 48. The patented S15 fits 15 rounds flush in the grip, with nothing hanging below it. Extends to 17, 20 or 25 rounds. Requires a Shield Arms steel mag catch. Made in USA, with a lifetime warranty and Spring for Life.
$39.95
S15 Magazine Replacement Plastic

S15 Magazine Replacement Plastic

A replacement follower, locking plate and base pad for the Shield Arms S15 magazine. Choose the Gen 1 set or the Gen 2 & 3 set. Uses your S15’s existing spring.
$3.95
Replacement Spring for Z9 Magazine

Replacement Spring for Z9 Magazine

Replacement Spring for Z9 Magazine - Premium quality product with superior construction and reliable performance.
$2.95
Replacement Spring for Glock 19/23 and S15 Magazine w/ Shield Arms +2 Extension

Replacement Spring for Glock 19/23 and S15 Magazine w/ Shield Arms +2 Extension

Shield Arms replacement spring for Glock 19/23 and S15 magazines with +2 extensions. Premium quality, reliable performance. Essential maintenance part.
$2.95
Shield Arms Carry Magwell - Glock® 43X/48 - Black

Shield Arms Carry Magwell for Glock 43X / 48

A low-profile magwell for the Glock® 43X and 48: faster, more forgiving reloads with minimal added bulk. CNC-machined 6061-T6 aluminum, drop-in install, made in Bigfork, Montana.
$74.95

FREE SHIPPING FOR ORDERS OVER $100!