S15 Magazine Replacement Plastic

Manufacturer: Shield Arms
A replacement follower, locking plate and base pad for the Shield Arms S15 magazine. Choose the Gen 1 set or the Gen 2 & 3 set. Uses your S15’s existing spring.
SKU: S15-PLASTIC
*
Availability: In stock
$3.95
i h
Buy now, pay later Available at checkout on orders over $150
Know Before You Order

Pick the Set for Your S15 Generation.

These parts fit Shield Arms S15 magazines for the Glock® 43X and 48. The follower is different between generations, so choose Gen 1 or Gen 2 & 3 from the menu to match your magazine. The parts don't fit factory Glock® magazines or other aftermarket magazines. The set doesn't include a spring; see the S15 replacement spring.

What Is the S15 Magazine Replacement Plastic?

It's a set of the three plastic parts in a Shield Arms S15 magazine for the Glock® 43X and 48: a grey follower, the locking plate and the base pad. Sets come for Gen 1 or for Gen 2 and Gen 3 S15s, because the follower differs between them. Use it to replace worn, cracked or lost parts, or keep a set on hand as spares. The S15 stays at 15 rounds, and the parts go in with no tools. Lifetime warranty.

  • In the set: (1) grey follower, (1) locking plate, (1) base pad
  • Options: Gen 1, or Gen 2 & 3
  • Uses: the spring already in your S15 (not included)
  • Capacity: no change, the S15 stays at 15
S15 Parts

Fresh Plastic for a Hard-Working S15.

A carry magazine gets dropped, stripped, loaded and cleaned for years. The steel body takes it, but the plastic parts are the ones that hit the ground and ride the spring. This set replaces all three at once.

Swap out a worn follower, a cracked base pad or a lost locking plate and the magazine is back in service. It works for every S15 we've made, from the first generation on. Just pick the set that matches yours.

3 Plastic parts, one set
2 Sets: Gen 1, or Gen 2 & 3
15 Rounds, no change to capacity
0 Tools to install
In the Set

Every Plastic Part in an S15

  • Grey Follower

    Rides on top of the spring and lifts each round into position. Made for your generation: Gen 1, or Gen 2 and 3.

  • Locking Plate

    Sits on the bottom of the spring and holds the base pad in place. Its tab is what you push to take the magazine apart.

  • Base Pad

    Closes the bottom of the magazine and keeps the S15 flush at 15 rounds.

  • Uses Your Spring

    Installs with the spring already in your S15. If yours is worn out, Spring for Life covers a new one.

Installation

Rebuild an S15 With No Tools

Push the tab on the bottom of the S15 and slide the base pad off, holding the spring with your thumb. Ease the locking plate, spring and follower out, swap in the new parts, and reassemble in reverse until the tab locks. No punch needed. Not sure which generation you have? Contact us before you order and we'll help you match it.

Compare

Which S15 Part Do You Need?

Replacing everything but the spring? This set has it. Just need one piece? Order it on its own.

Part Spring Base Pad Locking Plate Follower
S15 Replacement Plastic (this page) — ✓ ✓ ✓
S15 +0 Plastic Base Plate — ✓ — —
S15 +0 Aluminum Base Plate — ✓ — —
S15 Replacement Spring ✓ — — —

Need springs for every mag? See the S15 spring 3-pack and 5-pack. See the whole S-Series.

Specifications

In the set (1) grey follower, (1) locking plate, (1) base pad
Options Gen 1, or Gen 2 & 3 (follower is generation-specific)
Fits Shield Arms S15 magazine, all generations (choose your set)
Pistols Glock® 43X and 48
Doesn't fit Factory Glock® magazines, other aftermarket magazines
Capacity No change; the S15 stays at 15 rounds
Spring Not included; uses your S15's existing spring
Material Plastic
Install No tools; push the tab and slide the base pad off
Made in USA
Warranty Lifetime warranty. No spring is included; the spring in your S15 is covered by Spring for Life.
Questions

S15 Replacement Plastic FAQ

Which set do I need?

Match it to your magazine. Choose Gen 1 for a first-generation S15, or Gen 2 & 3 for a second- or third-generation S15. The follower is what differs, so the right set matters. Not sure? Contact us before you order.

What's in the set?

One grey follower for your generation, one locking plate and one base pad. That's every plastic part in an S15.

Does it come with a spring?

No. It installs with the spring already in your S15. Need a new one? See the S15 replacement spring, or the 3-pack and 5-pack.

How do I install it?

Push the tab on the bottom of the S15, slide the base pad off while holding the spring with your thumb, and take out the locking plate, spring and follower. Swap in the new parts and reassemble in reverse. See our installation guides for more.

Does it change capacity?

No. The S15 holds 15 with these parts. For more, see the +2, +5 and +10 extensions.

I only need a base pad. Is there a single part?

Yes. The S15 +0 Plastic Base Plate comes in Red or Grey for Gen 2 and Gen 3, and the S15 +0 Aluminum Base Plate comes in six colors for all three generations.

Will it fit my Glock® 43 or a factory 43X/48 magazine?

No. These parts are for Shield Arms S15 magazines only. For the single-stack Glock® 43, see the Z9 Replacement Plastic.

What's covered?

A lifetime warranty against defects in materials and workmanship. The set has no spring, but the spring in your S15 is covered by Spring for Life.

ODA Green

Used on: magazine extensions, magwells

ODA's (Operational Detachment Alpha) are the boots on the ground operational teams of a Special Forces Group. This color began as a special run for a deployed ODA. In continued support we have decided to continue the color as a standard offering and donate a portion of the proceeds to The Green Beret Foundation. Finish is anodized in green.

QPQ Nitrocarburizing Surface Treatment

Used on: magazines, barrels, slides

QPQ Nitrocarburizing is a type of surface treatment used to enhance the durability and corrosion resistance of metal parts. The process involves heating the metal in a controlled environment, where nitrogen and carbon are introduced to the surface of the metal. This forms a thin layer of a hard compound called "nitrides," which increase the surface hardness of the metal.

During the QPQ Nitrocarburizing process, the metal is immersed in a special salt bath and heated to high temperatures. The salt bath contains a mixture of chemicals that release nitrogen and carbon, which penetrate the surface of the metal. The process is carefully controlled to ensure that the nitrogen and carbon penetrate to a specific depth, creating a uniform layer of nitrides on the metal's surface.

The resulting nitride layer provides many benefits to the metal parts, including increased hardness, wear resistance, and corrosion resistance. This treatment helps to increase the lifespan and durability of metal parts, making them more reliable and long-lasting.

Any “scuffing” you see in the surface finish is completely normal, and will not affect the durability or corrosion resistance of the steel.

Electroless Nickel Plating

Used on: magazines

Silver electroless plating offers superior electrical conductivity and corrosion protection with excellent deposit uniformity and adhesion properties. This bright, reflective finish provides outstanding solderability and contact resistance while maintaining the consistent thickness and coverage that electroless plating processes are known for. Black electroless nickel plating provides these same exceptional deposit properties - including lubricity, hardness, and corrosion resistance - but with a fully conductive and uniform black surface finish that combines superior performance with an attractive dark appearance.

This item is controlled for export by the International Traffic in Arms Regulations (ITAR). Please check your state and local laws regarding magazine capacity restrictions.

Freedom Restricted States

If you live in a state that restricts magazine capacity we cannot ship to you unless you are law enforcement or otherwise exempt. If you are exempt from your state's ban please send us a copy of your documentation or official email to [email protected]. Please include your order number.

If you purchase from a ban state and you are NOT exempt, we will cancel your order and charge you a 5% cancellation fee.

Notice

GLOCK® is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H.  Neither Shield Arms nor this site are affiliated in any manner with, or otherwise endorsed by GLOCK, Inc. or GLOCK Ges.m.b.H.  The use of "GLOCK" on this and associated pages on our website is merely to advertise the sale of GLOCK® pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts, visit www.glock.com.

Products specifications
Firearms Manufacturer Glock
Firearms Model Glock 43X/48
Installation Help

Not sure how to install this product? Our step-by-step guides and video walkthroughs make it simple.

View Installation Guides →
Customers who bought this item also bought
Replacement Spring for S15 Magazine

Replacement Spring for S15 Magazine

A 10-coil replacement spring for the Shield Arms S15 magazine at 15 rounds. Built for high round counts. Also sold in 3- and 5-packs.
$2.95
Shield Arms S15 Gen 3 - 15 Round Glock 43X/48 Magazine

S15 Gen 3 15-Round Steel Magazine for Glock 43X / 48

The original steel 15-round magazine for the Glock 43X and 48. The patented S15 fits 15 rounds flush in the grip, with nothing hanging below it. Extends to 17, 20 or 25 rounds. Requires a Shield Arms steel mag catch. Made in USA, with a lifetime warranty and Spring for Life.
$39.95
Replacement Spring for S15 Magazine (5 Pack)

Replacement Spring for S15 Magazine (5 Pack)

Five 10-coil replacement springs for the Shield Arms S15 magazine at 15 rounds. Refresh a set of S15s at once, or keep spares on hand.
$13.95
Replacement Spring for S15 Magazine (3 Pack)

Replacement Spring for S15 Magazine (3 Pack)

Three 10-coil replacement springs for the Shield Arms S15 magazine at 15 rounds. Refresh a set of S15s at once, or keep spares on hand.
$7.95
Z9 Magazine Replacement Plastic

Z9 Magazine Replacement Plastic

Replacement base plate, locking plate and follower for the Shield Arms Z9 magazine. Black. Uses your Z9’s existing spring.
$3.95

FREE SHIPPING FOR ORDERS OVER $100!