S15 Magwell Combo 1 for Glock 43X / 48

Manufacturer: Shield Arms
The complete Glock® 43X / 48 upgrade: three S15 Gen 3 15-round steel magazines, a DUAL-FIT black nitride steel mag catch, and a black Carry Magwell. Made in the USA.
*
Availability: In stock
$188.95
i h
Buy now, pay later Available at checkout on orders over $150
Compatibility

Fits the Glock® 43X and 48. The Steel Catch Is Included.

This combo fits factory Glock® 43X and 48 frames, including MOS models. It doesn't fit the single-stack Glock® 43 or 43X/48 frames grip-chopped by our S10 service. The S15 is steel, and the polymer catch the pistol ships with isn't compatible with it, so the combo includes our DUAL-FIT steel catch, right- or left-handed.

What Is the S15 Magwell Combo 1?

S15 Magwell Combo 1 is a complete Glock® 43X / 48 upgrade in one box: three Shield Arms S15 Gen 3 15-round steel magazines, the DUAL-FIT steel mag catch they run on, and a black Shield Arms Carry Magwell. The S15s put 15 rounds flush in the grip, and the low-profile magwell guides each one into the well faster on a reload. Made in the USA, with a lifetime warranty and Spring for Life on the magazines.

  • In the combo: (3) S15 Gen 3 mags, (1) DUAL-FIT catch, (1) Carry Magwell
  • Fits: Glock® 43X and 48, including MOS
  • Capacity: 15 rounds per magazine, 45 total
  • Finish: black Nitrocarb mags, black anodized magwell
The Full Upgrade

More Rounds. Faster Reloads. One Box.

The S15 is the magazine that put Shield Arms on the map: 15 rounds, flush, in the slim Glock® 43X and 48. The Carry Magwell is its partner, a low-profile funnel that makes the reload faster and more forgiving without a bulky competition flare.

This combo puts both in one box with three S15s for the pistol, the belt and the range, plus the steel catch they run on. Install the catch and the magwell once, and your 43X or 48 is fully set up.

3 S15 Gen 3 magazines
45 Rounds, all flush
1 Carry Magwell + DUAL-FIT catch
USA Made, with Spring for Life
In the Combo

Three Parts, One Complete Setup

  • Three S15 Gen 3 Mags

    15 rounds each, flush with the grip, in a steel body built on our patented staggered geometry. Black Nitrocarb finish.

  • DUAL-FIT Mag Catch

    Black nitride steel, right- or left-handed. Also runs Glock®'s factory 15-round steel mags. Made in the USA.

  • Carry Magwell

    A low-profile funnel machined from 6061-T6 aluminum in Bigfork, Montana. Black Type II anodized.

  • Drop-In Install

    The catch and the magwell both install with basic tools and no gunsmithing. Hardware for the magwell is included.

One Magazine, Four Sizes

Flush at 15. Extend When You Want More.

Carry the S15 flush, or swap the base pad for an extension: 17 with the +2, 20 with the +5, 25 with the +10. The Carry Magwell runs them all.

Want an extension in the box? See Magwell Combo 2 or 3. Capacity laws vary by state and city. Check yours before you buy.

Why a Steel Catch

Steel Mags Run on a Steel Catch

The S15 is steel and the catch your 43X/48 shipped with is polymer, and the two aren't compatible. This combo includes our DUAL-FIT steel catch, which also runs Glock®'s factory 15-round steel mags. It's a one-time install, and our installation guides cover both the catch and the magwell. Another manufacturer's catch may cause reliability issues.

Compare

Pick Your Combo

Every Magwell Combo includes three S15s, the steel catch and a Carry Magwell. Combos 2 and 3 add an extension.

Combo S15 Mags Steel Catch Extensions Carry Magwell
S15 Magwell Combo 1 (this page) 3 ✓ — ✓
S15 Magwell Combo 2 3 ✓ 1 × +5 ✓
S15 Magwell Combo 3 3 ✓ 1 × +2 ✓
S15 Combo Pack 1 3 ✓ — —

Want the widest funnel instead? See the Premium Magwell for the 43X / 48. See all S-Series combos.

Specifications

In the combo (3) S15 Gen 3 magazines, (1) DUAL-FIT steel mag catch, (1) Shield Arms Carry Magwell for Glock® 43X / 48
Compatible pistols Glock® 43X and 48, including MOS
Doesn't fit Glock® 43, S10 grip-chopped 43X/48 frames
Capacity 15 rounds of 9mm per magazine, 45 total
Magazines S15 Gen 3, steel, patented staggered geometry, same length as the factory 43X/48 magazine, black Nitrocarb (QPQ nitrocarburized)
Base pad Easy-remove, impact resistant; swaps for S15 +2, +5 or +10 extensions
Mag catch DUAL-FIT steel catch, black nitride, right- or left-handed; also runs Glock® factory 15-round steel mags
Magwell Carry Magwell, low profile, 6061-T6 aluminum, black Type II anodized, drop-in with hardware included
Made in USA; magwell machined in Bigfork, Montana
Warranty Lifetime warranty, plus Spring for Life on every magazine

All Black

This combo comes in one look: black Nitrocarb magazines, a black nitride DUAL-FIT catch and a black anodized magwell. Want a colored magwell? The Carry Magwell on its own comes in six anodized colors.

Black
Questions

S15 Magwell Combo 1 FAQ

Which pistols does it fit?

Factory Glock® 43X and 48 frames, including MOS models. For the single-stack Glock® 43, see the Z-Series.

Does it work in a grip-chopped pistol?

The S15s do, but the Carry Magwell doesn't fit a frame converted by our S10 Grip Chop Service. For a chopped pistol, see S15 Combo Pack 1 and the Grip Chop Sleeve.

Do I need anything else?

No. The combo includes the DUAL-FIT catch the S15s run on and the hardware for the magwell. Pick right- or left-handed for the catch when you order. Our installation guides walk you through both installs.

Will my polymer 10-round mags still work?

They'll run with the steel catch, but we don't recommend it for regular use. Steel on polymer adds wear to the magazine over time.

Why a Carry Magwell and not the Premium?

The Carry Magwell adds a faster reload with minimal added bulk, which suits a 43X or 48 you carry every day. Want the widest funnel we make? Buy the Premium Magwell with Combo Pack 1.

Does the magwell work with extensions?

Yes. It runs the S15 with or without extensions, the S20, both factory Glock® 43X/48 magazines and every aftermarket 43X/48 mag we know of.

Can I get it in another color?

This combo is black only. The Carry Magwell sold on its own comes in Black, Red, Grey, Mud, ODA Green and Gold.

What is Spring for Life?

Free replacement magazine springs for as long as you own your S15s. See the program.

What's covered?

A lifetime warranty against defects in materials and workmanship, plus Spring for Life on every magazine.

ODA Green

Used on: magazine extensions, magwells

ODA's (Operational Detachment Alpha) are the boots on the ground operational teams of a Special Forces Group. This color began as a special run for a deployed ODA. In continued support we have decided to continue the color as a standard offering and donate a portion of the proceeds to The Green Beret Foundation. Finish is anodized in green.

QPQ Nitrocarburizing Surface Treatment

Used on: magazines, barrels, slides

QPQ Nitrocarburizing is a type of surface treatment used to enhance the durability and corrosion resistance of metal parts. The process involves heating the metal in a controlled environment, where nitrogen and carbon are introduced to the surface of the metal. This forms a thin layer of a hard compound called "nitrides," which increase the surface hardness of the metal.

During the QPQ Nitrocarburizing process, the metal is immersed in a special salt bath and heated to high temperatures. The salt bath contains a mixture of chemicals that release nitrogen and carbon, which penetrate the surface of the metal. The process is carefully controlled to ensure that the nitrogen and carbon penetrate to a specific depth, creating a uniform layer of nitrides on the metal's surface.

The resulting nitride layer provides many benefits to the metal parts, including increased hardness, wear resistance, and corrosion resistance. This treatment helps to increase the lifespan and durability of metal parts, making them more reliable and long-lasting.

Any “scuffing” you see in the surface finish is completely normal, and will not affect the durability or corrosion resistance of the steel.

Electroless Nickel Plating

Used on: magazines

Silver electroless plating offers superior electrical conductivity and corrosion protection with excellent deposit uniformity and adhesion properties. This bright, reflective finish provides outstanding solderability and contact resistance while maintaining the consistent thickness and coverage that electroless plating processes are known for. Black electroless nickel plating provides these same exceptional deposit properties - including lubricity, hardness, and corrosion resistance - but with a fully conductive and uniform black surface finish that combines superior performance with an attractive dark appearance.

Products specifications
Firearms Manufacturer Glock
Firearms Model Glock 43X/48
Installation Help

Not sure how to install this product? Our step-by-step guides and video walkthroughs make it simple.

View Installation Guides →
Customers who bought this item also bought
Shield Arms S15 Gen 3 - 15 Round Glock 43X/48 Magazine

S15 Gen 3 15-Round Steel Magazine for Glock 43X / 48

The original steel 15-round magazine for the Glock 43X and 48. The patented S15 fits 15 rounds flush in the grip, with nothing hanging below it. Extends to 17, 20 or 25 rounds. Requires a Shield Arms steel mag catch. Made in USA, with a lifetime warranty and Spring for Life.
$39.95
Shield Arms S15 +2 Magazine Extension - Black

S15 +2 Magazine Extension for Glock 43X / 48

A billet aluminum +2 extension that takes a Shield Arms S15 magazine from 15 to 17 rounds in the Glock 43X/48. The 11-coil plus-power spring is included.
$34.95
Premium S15 Steel Mag Catch for Glock® 43X / 48 - Nitride

Premium S15 Steel Mag Catch for Glock 43X/48

Premium hand-specific steel mag catch for Shield Arms S15 magazines. Enhanced ergonomics with extended knurling, beveled edges for smooth reloads, and increased magazine engagement. Not compatible with OEM magazines. Select left or right hand. Made in USA, lifetime warranty.
$36.95
S15 +10 Pre-installed Magazine Extension - Black

S15 +10 Pre-Installed Magazine for Glock 43X / 48

An S15 Gen 3 magazine with the black anodized S15 +10 extension and a 15-coil power spring already installed. That’s 25 rounds for the Glock 43X/48, ready to load.
$74.95
S15 Starter Kit - Nitrocarb

S15 Starter Kit for Glock 43X / 48

Everything you need to run an S15 in your Glock 43X or 48: one S15 Gen 3 15-round steel magazine and a DUAL-FIT black nitride steel mag catch. Made in the USA.
$44.95

FREE SHIPPING FOR ORDERS OVER $100!