Z9 +0 Plastic Base Plate for Glock 43

Manufacturer: Shield Arms
A replacement plastic base plate for the Shield Arms Z9 magazine in the Glock 43. Keeps the Z9 at 9 rounds, uses your existing spring, and slides on with no tools.
SKU: Z9-PLA-BAS
*
  • Not available
  • Not available
Availability: In stock
$2.95
i h
Buy now, pay later Available at checkout on orders over $150
Compatibility

Fits the Shield Arms Z9 Magazine Only.

This base plate fits the Shield Arms Z9 magazine for the Glock® 43. It doesn't fit the factory Glock® 43 magazine, our flush Z8, or S-Series magazines. It adds no capacity and comes without a spring; it uses the spring already in your Z9. Want more rounds? See the Z9 extensions.

What Is the Z9 +0 Plastic Base Plate?

It's a replacement plastic base plate for the Shield Arms Z9 magazine in the Glock® 43. It keeps the Z9 at its standard 9 rounds, slides on in place of the existing base plate, and has three window cuts for a better grip when you strip or pull the magazine. It comes in Grey or Red, is made in the USA, and has a lifetime warranty.

  • Capacity: +0, the Z9 stays at 9 rounds
  • Fits: Shield Arms Z9 magazine only
  • Uses: your Z9's existing spring and follower
  • Colors: Grey or Red
Z9 Base Plate

A Spare Base Plate for Your Z9.

The base plate is the part of a magazine that hits the ground, the mag well and the bench. This is a fresh one for your Z9: replace one that's cracked or lost, add a color to tell your magazines apart, or keep a few on hand.

It's also how you take a Z9 back to 9 rounds after running an extension. Swap the extension off, put the standard Z9 spring back in, and slide this plate on. The magazine is back to the same pinky-extension length it shipped at.

+0 Z9 stays at 9 rounds
3 Window cuts for grip
0 Tools to install
USA Made, lifetime warranty
Features

Small Part, Easy Swap

  • Keeps the Z9 at 9

    No added length and no added rounds. The Z9 stays at the same length as a factory 43 mag with a pinky extension.

  • Three Window Cuts

    Cutouts in the plate give your fingers something to catch when you pull the magazine or strip it from the pistol.

  • Slides On, No Tools

    Push the tab on the bottom of the Z9, slide the old plate off while you hold the spring with your thumb, and slide this one on.

  • Uses Your Spring

    Installs with the Z9's own spring and follower. Nothing else to buy for a Z9 running at 9.

Z9 Capacity

Nine Rounds With This Plate.

Run the Z9 at 9 with this +0 plate, or swap it for an extension: 10 with the +1, 12 with the +3. Every option uses the same Z9 magazine and the same steel catch.

Capacity laws vary by state and city. Check yours before you buy.

Installation

Swap the Plate in a Minute

Push the tab on the bottom of the Z9 and slide the old base plate off, capturing the spring with your thumb. Slide this plate on until the tab locks. No punch and no tools. Coming off an extension? Put the standard Z9 spring back in first; the extension's spring is sized for the extension.

Compare

Base Plate or Extension?

Keep the Z9 at 9 with this plate, or add rounds with an extension.

Option Material Spring Z9 Rounds
Z9 +0 Base Plate (this page) Plastic Uses your Z9 spring 9
Z9 +1 Extension Billet aluminum Included 10
Z9 +3 Extension Billet aluminum Included 12

Rather have it ready to load? The Z9 +1 Pre-Installed ships on a new Z9. See every Z-Series extension.

Specifications

Capacity +0, the Z9 stays at 9 rounds
Fits Shield Arms Z9 magazine only
Pistol Glock® 43
Doesn't fit Factory Glock® 43 magazines, Shield Arms Z8, S-Series magazines
Uses Your Z9's existing spring and follower (no spring included)
Material Plastic
Colors Grey or Red
Grip Three window cuts
Install Slides on in place of the existing base plate; no tools
Made in USA
Warranty Lifetime warranty. No spring is included, so Spring for Life doesn't apply.

Two Colors

Pick Grey or Red from the Color menu. Running more than one Z9? A different color on each makes it easy to tell your carry mag from your spare.

Grey Red
Questions

Z9 +0 Base Plate FAQ

Which magazines does it fit?

The Shield Arms Z9 only. It doesn't fit factory Glock® 43 magazines, the Z8 or S-Series magazines.

Does it add capacity?

No. It's a +0: the Z9 holds 9, the same as with its standard base plate. For 10 or 12, see the Z9 +1 and Z9 +3.

Does it come with a spring?

No. It installs with the spring and follower already in your Z9. Need a new spring? See the Z9 replacement spring.

How do I install it?

Push the tab on the bottom of the Z9, slide the old plate off while holding the spring with your thumb, then slide this plate on until the tab locks. See our installation guides for more.

Can I take my Z9 back to 9 after running an extension?

Yes. Remove the extension, put a standard Z9 spring back in, and slide this plate on. The extension's spring is longer and is sized for the extra rounds.

Will it fit my Glock® 43X or 48?

No. The Z9 and this plate are for the single-stack Glock® 43. For the 43X and 48, see the S-Series.

What colors does it come in?

Grey or Red. Pick yours from the Color menu on this page.

What's covered?

A lifetime warranty against defects in materials and workmanship. No spring is included, so Spring for Life doesn't apply.

ODA Green

Used on: magazine extensions, magwells

ODA's (Operational Detachment Alpha) are the boots on the ground operational teams of a Special Forces Group. This color began as a special run for a deployed ODA. In continued support we have decided to continue the color as a standard offering and donate a portion of the proceeds to The Green Beret Foundation. Finish is anodized in green.

QPQ Nitrocarburizing Surface Treatment

Used on: magazines, barrels, slides

QPQ Nitrocarburizing is a type of surface treatment used to enhance the durability and corrosion resistance of metal parts. The process involves heating the metal in a controlled environment, where nitrogen and carbon are introduced to the surface of the metal. This forms a thin layer of a hard compound called "nitrides," which increase the surface hardness of the metal.

During the QPQ Nitrocarburizing process, the metal is immersed in a special salt bath and heated to high temperatures. The salt bath contains a mixture of chemicals that release nitrogen and carbon, which penetrate the surface of the metal. The process is carefully controlled to ensure that the nitrogen and carbon penetrate to a specific depth, creating a uniform layer of nitrides on the metal's surface.

The resulting nitride layer provides many benefits to the metal parts, including increased hardness, wear resistance, and corrosion resistance. This treatment helps to increase the lifespan and durability of metal parts, making them more reliable and long-lasting.

Any “scuffing” you see in the surface finish is completely normal, and will not affect the durability or corrosion resistance of the steel.

Electroless Nickel Plating

Used on: magazines

Silver electroless plating offers superior electrical conductivity and corrosion protection with excellent deposit uniformity and adhesion properties. This bright, reflective finish provides outstanding solderability and contact resistance while maintaining the consistent thickness and coverage that electroless plating processes are known for. Black electroless nickel plating provides these same exceptional deposit properties - including lubricity, hardness, and corrosion resistance - but with a fully conductive and uniform black surface finish that combines superior performance with an attractive dark appearance.

Products specifications
Firearms Manufacturer Glock
Firearms Model Glock 43
Installation Help

Not sure how to install this product? Our step-by-step guides and video walkthroughs make it simple.

View Installation Guides →
Customers who bought this item also bought
Z9 Pistol Magazine for Glock® 43 - PowerCron

Z9 9-Round Steel Magazine for Glock 43

9 rounds of 9mm in a steel magazine for the Glock® 43, the same length as a factory mag with a pinky extension. Takes Z9 +1 and +3 extensions. Requires a Z-Series steel mag catch.
$37.95
Z9 +1 Mag Extension for Glock® 43 - Black

Z9 +1 Magazine Extension for Glock 43

Takes a Shield Arms Z9 magazine from 9 rounds to 10 in your Glock® 43. Billet 6061 aluminum, easy-access floor plate, 12-coil plus-power spring included. Made in the USA.
$39.95
Z-Series Dual Mag Kit

Z-Series Dual Mag Kit for Glock 43 – Z8 + Z9 + Steel Mag Catch

One Z8 8-round flush magazine, one Z9 9-round magazine and the steel mag catch they both run on. Carry 8 flush, reload with 9. Made in the USA.
$59.95
Z8 Magazine for Glock® 43

Z8 8-Round Flush Steel Magazine for Glock 43

8 rounds of 9mm in a steel magazine for the Glock® 43 that sits flush, the same length as the factory 6-round mag. Requires a Z-Series steel mag catch.
$36.95
Shield Arms S15 Gen 3 - 15 Round Glock 43X/48 Magazine

S15 Gen 3 15-Round Steel Magazine for Glock 43X / 48

The original steel 15-round magazine for the Glock 43X and 48. The patented S15 fits 15 rounds flush in the grip, with nothing hanging below it. Extends to 17, 20 or 25 rounds. Requires a Shield Arms steel mag catch. Made in USA, with a lifetime warranty and Spring for Life.
$39.95

FREE SHIPPING FOR ORDERS OVER $100!