S15 Combo Pack 3 for Glock 43X / 48

Manufacturer: Shield Arms
Three S15 Gen 3 15-round magazines and two S15 +5 extensions for the Glock 43X/48: carry one flush and run two at 20.
SKU: S15-COMBO-G3-3M-2E
*
  • Not available
  • Not available
  • Not available
  • Not available
Availability: In stock
$179.95
i h
Buy now, pay later Available at checkout on orders over $150
Know Before You Order

Mags and Two +5s. The Steel Catch Is Sold Separately.

This pack is three S15 Gen 3 magazines and two S15 +5 extensions for the Glock® 43X and 48, all generations. It doesn't include a mag catch. The S15 is steel, and the polymer catch the pistol ships with isn't compatible with it, so every pistol that runs these needs our DUAL-FIT steel catch, right- or left-handed. Starting from scratch? Combo Pack 4 is this same setup with the catch included.

What Is the S15 Combo Pack 3?

S15 Combo Pack 3 is three Shield Arms S15 Gen 3 15-round steel magazines and two S15 +5 extensions for the Glock® 43X and 48. Carry one S15 flush at 15 and put the +5s on the other two for a pair of 20-round reloads, 55 rounds in all. The magazines are black Nitrocarb, the extensions come in Black, Red, Grey or Mud anodize, and the magazines run on the Shield Arms DUAL-FIT steel mag catch, sold separately. Made in the USA, with the extensions machined in Bigfork, Montana, and a lifetime warranty and Spring for Life.

  • In the pack: (3) S15 Gen 3 mags, (2) S15 +5 extensions
  • Fits: Glock® 43X and 48, all generations
  • Capacity: 15 flush, 20 with a +5; 55 total
  • Requires: the DUAL-FIT steel mag catch, sold separately
Carry + Range

One Flush to Carry. Two 20s to Reload.

The S15 is the magazine that put Shield Arms on the map: 15 rounds, flush, in the slim Glock® 43X and 48. Combo Pack 3 puts two +5 extensions in the box, so two of the three can run at 20.

Keep a flush S15 in the pistol and run the two 20-rounders as reloads on the belt or at the range. Want all three flush for a while? The extensions come off. Already running the steel catch? This is the quickest way to add a pair of 20s.

3 S15 Gen 3 magazines
2 S15 +5 extensions
55 Rounds, 15 + 20 + 20
USA Made, with Spring for Life
In the Pack

Three Mags, Two Extensions

  • Three S15 Gen 3 Mags

    15 rounds each, flush with the grip, in a steel body built on our patented staggered geometry.

  • Two S15 +5 Extensions

    Billet 6061 aluminum, machined in Bigfork, Montana, in Black, Red, Grey or Mud. Each comes with its 12-coil power spring and takes an S15 to 20.

  • Easy-Access Floor Plates

    Open the extensions for cleaning without pulling them off the magazine. Index cuts help you strip them from a pouch.

  • Set It Up Your Way

    Each +5 fits any S15. Run 15 / 20 / 20, go all flush, or move the extensions as your carry changes.

One Magazine, Four Sizes

Flush at 15. Two of Them at 20.

Carry the S15 flush, or swap the base pad for an extension: 17 with the +2, 20 with the +5, 25 with the +10. This pack includes two +5s.

Want the third mag at 20 too? Add an S15 +5 Extension. Capacity laws vary by state and city. Check yours before you buy.

Required, Sold Separately

Every Pistol Needs a Steel Catch

The S15 is steel and the catch the 43X/48 ships with is polymer, and the two aren't compatible. Each pistol that runs these magazines needs our DUAL-FIT steel catch, made in the USA in right- and left-handed versions. It also runs Glock®'s factory 15-round steel mags. It's a one-time install per pistol, and our installation guides cover the catch and the extensions. Another manufacturer's catch may cause reliability issues.

Compare

Pick Your Pack

Every pack below includes three S15s and at least one extension. Pack 4 also includes the steel catch.

Pack S15 Mags Steel Catch Extensions
S15 Combo Pack 3 (this page) 3 — 2 × +5
S15 Combo Pack 2 3 — 1 × +5
S15 Combo Pack 7 3 — +5 and +2
S15 Combo Pack 4 3 ✓ 2 × +5

New to the S15? Start with Combo Pack 1 or the Starter Kit, which include the catch. See all S-Series combos.

Specifications

In the pack (3) S15 Gen 3 magazines, (2) S15 +5 extensions with springs
Compatible pistols Glock® 43X and 48, all generations
Capacity 15 rounds of 9mm flush, 20 with a +5; 55 total as 15 / 20 / 20
Length Same as the factory Glock® 43X / 48 magazine, flush fit; the +5 extends below the grip
Magazine body Steel, patented staggered geometry
Magazine finish Black Nitrocarb (QPQ nitrocarburized)
Extensions S15 +5, billet 6061 aluminum, Type II anodized in Black, Red, Grey or Mud, 12-coil power spring, easy-access floor plate, index cuts
Base pad Easy-remove, impact resistant; swaps for S15 +2, +5 or +10 extensions
Mag catch Shield Arms DUAL-FIT steel catch required, right- or left-handed, sold separately
Magwells Works with Shield Arms Carry and Premium magwells for the 43X/48
Made in USA; extensions machined in Bigfork, Montana
Warranty Lifetime warranty plus Spring for Life on the magazines and extensions

Black Mags, Your Extension Color

The three magazines are black Nitrocarb. Pick the color for the +5s from the Mag Extension Color menu: Black, Red, Grey or Mud. Want Silver Nickel or Black Nickel magazines? Choose your finish on the single S15 Magazine.

About the Nitrocarb Finish

QPQ nitrocarburizing adds nitrogen and carbon to the steel's surface in a heated salt bath, forming a hard, even black layer that resists wear and corrosion. Light scuffing of the surface finish is normal and doesn't affect durability.

Black Red Grey Mud
Questions

S15 Combo Pack 3 FAQ

Does it include a mag catch?

No. Pack 3 is magazines and extensions only. Each pistol needs a Shield Arms DUAL-FIT steel catch; pick right-handed (button on the left side of the frame, like the factory setup) or left-handed. Want it in the box? Combo Pack 4 is the same setup with the catch.

Which pistols does it fit?

The Glock® 43X and 48, all generations. For the single-stack Glock® 43, see the Z-Series. For the Glock® 19 and 17, see the DS-Series.

How do I install the extensions?

Remove the S15 base pad, swap in the 12-coil power spring that comes with the +5, and install the extension. Follow the included instructions and our installation guides.

Can I carry a 20-round S15 concealed?

The +5 extends below the grip, so it's less discreet than a flush S15. A common setup is a flush S15 in the pistol and the 20s as reloads.

Can I extend all three mags?

The pack has two +5s, and each fits any S15. To put the third at 20, add an S15 +5 Extension.

Will the catch run Glock®'s factory 15-round mags?

Yes. The DUAL-FIT also runs Glock®'s factory 15-round steel 43X/48 magazines, so you can mix them with your S15s.

Will my polymer 10-round mags still work?

They'll run with the steel catch, but we don't recommend it for regular use. Steel on polymer adds wear to the magazine over time.

Does it work in a grip-chopped pistol?

Yes. A 43X or 48 converted by our S10 Grip Chop Service runs the S15 with or without the extensions. Add a Grip Chop Sleeve to restore full grip length on a flush S15.

What is Spring for Life?

Free replacement springs for as long as you own your S15s and extensions. See the program.

What's covered?

A lifetime warranty against defects in materials and workmanship, plus Spring for Life on the magazines and extensions.

ODA Green

Used on: magazine extensions, magwells

ODA's (Operational Detachment Alpha) are the boots on the ground operational teams of a Special Forces Group. This color began as a special run for a deployed ODA. In continued support we have decided to continue the color as a standard offering and donate a portion of the proceeds to The Green Beret Foundation. Finish is anodized in green.

QPQ Nitrocarburizing Surface Treatment

Used on: magazines, barrels, slides

QPQ Nitrocarburizing is a type of surface treatment used to enhance the durability and corrosion resistance of metal parts. The process involves heating the metal in a controlled environment, where nitrogen and carbon are introduced to the surface of the metal. This forms a thin layer of a hard compound called "nitrides," which increase the surface hardness of the metal.

During the QPQ Nitrocarburizing process, the metal is immersed in a special salt bath and heated to high temperatures. The salt bath contains a mixture of chemicals that release nitrogen and carbon, which penetrate the surface of the metal. The process is carefully controlled to ensure that the nitrogen and carbon penetrate to a specific depth, creating a uniform layer of nitrides on the metal's surface.

The resulting nitride layer provides many benefits to the metal parts, including increased hardness, wear resistance, and corrosion resistance. This treatment helps to increase the lifespan and durability of metal parts, making them more reliable and long-lasting.

Any “scuffing” you see in the surface finish is completely normal, and will not affect the durability or corrosion resistance of the steel.

Electroless Nickel Plating

Used on: magazines

Silver electroless plating offers superior electrical conductivity and corrosion protection with excellent deposit uniformity and adhesion properties. This bright, reflective finish provides outstanding solderability and contact resistance while maintaining the consistent thickness and coverage that electroless plating processes are known for. Black electroless nickel plating provides these same exceptional deposit properties - including lubricity, hardness, and corrosion resistance - but with a fully conductive and uniform black surface finish that combines superior performance with an attractive dark appearance.

Products specifications
Firearms Manufacturer Glock
Firearms Model Glock 43X/48
Installation Help

Not sure how to install this product? Our step-by-step guides and video walkthroughs make it simple.

View Installation Guides →
Customers who bought this item also bought
Premium S15 Steel Mag Catch for Glock® 43X / 48 - Nitride

Premium S15 Steel Mag Catch for Glock 43X/48

Premium hand-specific steel mag catch for Shield Arms S15 magazines. Enhanced ergonomics with extended knurling, beveled edges for smooth reloads, and increased magazine engagement. Not compatible with OEM magazines. Select left or right hand. Made in USA, lifetime warranty.
$36.95
Shield Arms Carry Magwell - Glock® 43X/48 - Black

Shield Arms Carry Magwell for Glock 43X / 48

A low-profile magwell for the Glock® 43X and 48: faster, more forgiving reloads with minimal added bulk. CNC-machined 6061-T6 aluminum, drop-in install, made in Bigfork, Montana.
$74.95
SA Premium Magwell - Glock 43X/48 - Black

Premium Magwell for Glock 43X / 48

Our widest magwell for the Glock 43X and 48, CNC-machined from 6061-T6 aluminum in Bigfork, Montana. Drop-in install with included hardware; runs S15, S20 and factory mags.
$79.95
Shield Arms S15 +2 Magazine Extension - Black

S15 +2 Magazine Extension for Glock 43X / 48

A billet aluminum +2 extension that takes a Shield Arms S15 magazine from 15 to 17 rounds in the Glock 43X/48. The 11-coil plus-power spring is included.
$34.95
Shield Arms S15 +5 Magazine Extension - Black

S15 +5 Magazine Extension for Glock 43X / 48

A billet aluminum +5 extension that takes a Shield Arms S15 magazine from 15 to 20 rounds in the Glock 43X/48. The 12-coil power spring is included. Your S15 runs on a Shield Arms steel mag catch.
$39.95

FREE SHIPPING FOR ORDERS OVER $100!