Know Before You Order

Pick Your Strap by Waist Size, Then Trim to Fit.

The 50-inch strap fits waists up to 46 inches. The 65-inch strap fits waists up to 60 inches. Both ship long so you can trim the strap to your size once and reinstall the buckle. Measure twice before you cut: trimmed strap can't be added back.

What Is the Shield Arms Billet EDC Belt?

The Billet EDC Belt is a 1.5-inch everyday belt with no holes. A coated-polyester strap embossed with wide locking teeth runs through a buckle CNC machined from billet aluminum in Bigfork, Montana, so it adjusts to your exact fit and releases with one pull of the lifter. The strap is waterproof, wipes clean and comes in 50-inch or 65-inch lengths you trim to size. The buckle is anodized Black or Grey, comes in Original or Glove Latch styles, and moves between straps. Made in the USA with a lifetime warranty.

Fits: waists up to 46" (50" strap) or 60" (65" strap)
Width: 1.5", standard belt-loop and clip size
Buckle: billet aluminum, anodized, machined in Bigfork, MT
Warranty: lifetime, made in the USA

Billet EDC Belt

No Holes. No Guesswork. No Wearing Out.

A regular belt gives you five holes and hopes one of them is right. This one has none. The strap's wide teeth lock into the buckle wherever you stop, so it fits the same with a holster on, after a big meal, or under a jacket in January.

The buckle is machined from billet aluminum and anodized in Bigfork, in the same shop that makes our magwells and mag extensions. There's no leather to crack and no holes to stretch out, which is why it carries a lifetime warranty.

0 Holes to stretch or tear

1.5" Standard width

Billet Buckle machined in Bigfork, MT

Lifetime Warranty, made in the USA

Features

Built to Outlast Every Belt You've Owned

Locks Where You Stop

Wide teeth embossed in the strap lock into the buckle. Pull to tighten, and it holds right where you stop.
One-Pull Release

Pull the lifter and the strap slides free. On the Glove Latch, the lifter runs to the buckle's edge so you can work it with gloves on.
Billet Aluminum Buckle

CNC machined from billet aluminum in Bigfork, Montana, then anodized Black or Grey for a hard, bonded finish.
Waterproof Strap

Coated-polyester webbing that won't stretch, wipes clean with water and dries in minutes.

Buckle Styles

Original or Glove Latch

Both buckles lock, adjust and release the same way. The difference is the shape of the lifter you pull to let the strap go.

Original buckle: a lifter with an angled pull tab and a finger pocket cut into the frame beside it — **Original.** An angled pull tab and a finger pocket in the frame. The everyday buckle.

Glove Latch buckle: a full-width lifter that runs all the way to the edge of the buckle — **Glove Latch.** The lifter runs all the way to the edge, a bigger target you can find and work with gloves on.

Machined in Montana

Same Shop as Our Magwells and Extensions

We machine magazine extensions and magwells out of billet aluminum in Bigfork, and the belt buckle is made in the same shop. It's built to the same standard and backed by the same lifetime warranty.

Our Warranty See Our Magwells

Sizing

Choose Your Strap

Order by waist size, then trim the strap to fit. Both lengths take either buckle.

Strap	Width	Fits Waists Up To
50" strap	1.5"	46"
65" strap	1.5"	60"

Between sizes? Order the longer strap and trim it. Questions on fit? Contact us.

Specifications

Buckle	Billet aluminum, CNC machined in Bigfork, Montana
Buckle styles	Original or Glove Latch
Buckle finish	Anodized, Black or Grey
Strap	Coated-polyester webbing embossed with wide locking teeth; waterproof, won't stretch
Width	1.5"
Strap lengths	50" (fits waists up to 46") or 65" (fits waists up to 60")
Adjustment	Locking teeth, no holes; trim the strap to your size once
Care	Wipe with clean water; dry the buckle completely
Made in	USA
Warranty	Lifetime warranty

Buckle Colors

The buckle is anodized, so the color is part of the aluminum's surface rather than a coating sitting on top of it. It holds up to daily wear, handling and cleaning.

Black Grey

Strap Colors

Pair any strap color with either buckle color.

Black Grey Tan Orange Green

Questions

Billet EDC Belt FAQ

Which strap length should I order?

Go by waist size. The 50-inch strap fits waists up to 46 inches, and the 65-inch strap fits waists up to 60 inches. If you're close to the line, order the longer strap and trim it.

How do I trim it to size?

Take the buckle off the strap, put the strap on through your belt loops, and mark where it should end. Cut at the mark and reinstall the buckle. Leave a little extra the first time; you can always trim more, but you can't add it back.

How does it adjust without holes?

The strap has wide teeth embossed into it. Feed it through the buckle and pull to tighten; the buckle locks onto the teeth and holds. To loosen or take it off, pull the lifter.

Original or Glove Latch: which buckle should I get?

Both lock and adjust the same way. The Original has an angled pull tab with a finger pocket cut into the frame. On the Glove Latch, the lifter runs all the way to the edge of the buckle, so it's easier to find and work with gloves on. Pick it for duty gear, hunting, or anywhere you wear gloves.

Will it carry a holster or mag pouch?

It's 1.5 inches wide, the standard width most belt-clip holsters, mag carriers and pouches are made for. Because it adjusts without holes, you can loosen it a little for an inside-the-waistband holster and snug it back up when you take the holster off.

Can I move the buckle to another strap?

Yes. The buckle comes off the strap and goes on another, so one buckle can serve a work strap, a range strap and a dress strap.

Is it waterproof? How do I clean it?

The strap is waterproof. Wipe it down with clean water and it dries in minutes. To clean the buckle, remove its four screws, rinse with clean water, let every part dry completely, and reassemble. Don't put it back together wet.

Where is it made?

The buckle is CNC machined from billet aluminum and anodized in Bigfork, Montana, in the same shop that makes our magwells and magazine extensions. The whole belt is made in the USA.

What's covered by the warranty?

Our lifetime warranty covers defects in materials and workmanship. If your belt ever needs replacing, contact us.

Related

Put Something on the Belt

See more on the belts page.

Installation Help

Not sure how to install this product? Our step-by-step guides and video walkthroughs make it simple.

View Installation Guides →

Billet EDC Belt

Pick Your Strap by Waist Size, Then Trim to Fit.

What Is the Shield Arms Billet EDC Belt?

No Holes. No Guesswork. No Wearing Out.

Built to Outlast Every Belt You've Owned

Locks Where You Stop

One-Pull Release

Billet Aluminum Buckle

Waterproof Strap