Pistol Magazines

Steel Pistol Magazines for Glock

More Rounds. Same Pistol.

Steel walls are thinner than factory polymer, so more rounds fit in the grip you already carry. Three series cover the Glock 43, 43X, 48, 19 and 17.

Every series runs with a steel mag catch. Here's why.

First Steel Aftermarket 43X/48 Mag   Steel Body   Spring for Life   Lifetime Warranty   Made in USA

Why Steel

Built Different Where It Counts

 

Steel Body

Thinner walls than polymer. That's where the extra rounds come from, in nearly the same footprint.

Runs Like OEM

Engineered to drop free, lock the slide back, and feed the same ammo your factory magazines do.

Hard-Wearing Finish

Corrosion-resistant finishes stand up to carry sweat, dirt and high-round-count training.

Covered for Life

A lifetime warranty against defects, plus Spring for Life: free replacement springs for as long as you own the mag.

We built the first steel-body aftermarket magazine for the Glock 43X and 48. The rest of the industry followed.

The Z-Series and DS-Series carry the same steel-body standard to the Glock 43, 19 & 17.

One Required Upgrade

Every Series Runs With a Steel Mag Catch

Shield Arms magazines are steel, and the factory Glock mag catch is polymer. We build each series to run steel on steel, so swap in the matching Shield Arms catch once. New to Shield Arms? Each Starter Kit pairs a magazine with its catch.

Which Shield Arms Magazine Fits My Glock?

Shield Arms makes steel-body aftermarket magazines in three series, each sized for a Glock platform. Each holds more rounds than the factory magazine in nearly the same footprint.

  • Glock 43: Z-Series. The Z8 holds 8 rounds flush; the Z9 holds 9 at the length of a factory mag with a pinky extension.
  • Glock 43X and 48: S-Series. The S15 holds 15 rounds flush, the S20 holds 20, and the S10 fits grip-chopped frames.
  • Glock 19: DS-Series DS18. 18 rounds (3 over factory).
  • Glock 17, 34, 45, 47 and 19X: DS-Series DS20. 20 rounds (3 over factory).
  • Every series runs with a Shield Arms steel mag catch and is backed by a lifetime warranty and Spring for Life.
Questions

Pistol Magazine FAQ

 

Will a Shield Arms mag change how my pistol carries?

Very little. The S15 and Z8 sit flush, the Z9 matches a factory mag with a pinky extension, and the DS18 and DS20 add only a minimal amount of length.

Do I have to replace my mag catch?

Yes. Each series is built to run with a Shield Arms steel catch in place of the factory polymer catch. A Starter Kit includes the magazine and the catch.

Can I add more capacity later?

Yes. Our extension options take an S15 up to 17, 20, or 25 rounds and a Z9 up to 10 or 12 rounds. See the S-Series and Z-Series pages for more info.

What is Spring for Life?

Free replacement magazine springs for every Shield Arms magazine, for as long as you own it. See the program.

View as Grid List
Sort by
Display per page
Z9 Starter Kit

Z9 Starter Kit for Glock 43 – Magazine + Steel Mag Catch

Everything you need to run a Z9 in your Glock® 43: one 9-round Z9 steel magazine and one black nitride steel mag catch. Made in the USA.
$49.95
DS-18 Magazine for Glock 19

DS18 Magazine for Glock 19

An 18-round steel magazine for the Glock 19, three more than factory with only a minimal increase in length. Runs with a DS-Series steel mag catch, sold separately or in the DS18 Starter Kit.
$41.95
DS18 Starter Kit for Glock 19 — Gen 3

DS18 Starter Kit for Glock 19

One DS18 18-round steel magazine and the DS-Series steel mag catch it runs on, in a Gen 3 or Gen 4/5/6 version. Three more rounds than factory in your Glock 19.
$49.95
DS-20 Magazine for Glock 17

DS20 Magazine for Glock 17

A 20-round steel magazine for the Glock 17, 34, 45, 47 and 19X, three more than factory with only a minimal increase in length. Runs with a DS-Series steel mag catch, sold separately or in the DS20 Starter Kit.
$41.95
DS-Series Standard Mag Catch for Glock 17/19 - Gen 3

DS-Series Standard Mag Catch for Glock 17 / 19

The steel mag catch Shield Arms DS18 and DS20 magazines run on. Fits the Glock 17, 19, 34, 45, 47 and 19X in Gen 3 or Gen 4/5/6 versions. Made in the USA.
$19.95
Z9 Premium Steel Mag Catch for Glock® 43 - Nitride

Premium Z-Series Mag Catch for Glock 43

Premium-grade steel magazine catch engineered exclusively for Glock 43 pistols with Shield Arms Z8 and Z9 magazines. Features extended engagement surface and enhanced knurling for superior control and reliability.
$28.95
S15 Combo Pack 1 - Nitrocarb

S15 Combo Pack 1 for Glock 43X / 48

A full Glock® 43X / 48 carry setup: three S15 Gen 3 15-round steel magazines and a DUAL-FIT black nitride steel mag catch. 45 rounds, all flush. Made in the USA.
$121.95
Shield Arms S15 Gen 3 - 15 Round Glock 43X/48 Magazine

S15 Gen 3 15-Round Steel Magazine for Glock 43X / 48

The original steel 15-round magazine for the Glock 43X and 48. The patented S15 fits 15 rounds flush in the grip, with nothing hanging below it. Extends to 17, 20 or 25 rounds. Requires a Shield Arms steel mag catch. Made in USA, with a lifetime warranty and Spring for Life.
$39.95
S20 - 20 Round Glock 43X/48 Magazine

S20 20-Round Magazine for Glock 43X / 48

A 20-round, one-piece steel 9mm magazine for the Glock 43X and 48, built as the high-capacity spare next to a flush S15. Requires a Shield Arms steel mag catch (sold separately).
$44.95 $39.95
Z9 +3 Mag Extension for Glock® 43 - Black

Z9 +3 Magazine Extension for Glock 43

Takes a Shield Arms Z9 magazine from 9 rounds to 12 in your Glock® 43, double the factory mag. Billet 6061 aluminum, black anodized, 14-coil plus-power spring included. Made in the USA.
$37.95
Z9 Pistol Magazine for Glock® 43 - PowerCron

Z9 9-Round Steel Magazine for Glock 43

9 rounds of 9mm in a steel magazine for the Glock® 43, the same length as a factory mag with a pinky extension. Takes Z9 +1 and +3 extensions. Requires a Z-Series steel mag catch.
$37.95
Z9 Magazine Combo 1 for Glock 43

Z9 Magazine Combo 1 for Glock 43 – 3 Z9 Magazines + Steel Mag Catch

A full Glock® 43 carry setup: three Z9 9-round steel magazines and the black nitride steel mag catch they run on. 27 rounds total. Made in the USA.
$112.95
DS20 Starter Kit for Glock 17 — Gen 3

DS20 Starter Kit for Glock 17

One DS20 20-round steel magazine and the DS-Series steel mag catch it runs on, in a Gen 3 or Gen 4/5/6 version. Three more rounds than factory in your Glock 17, 34, 45, 47 or 19X.
$49.95
S10 Magazine - 10 Round Magazine for Glock® 43X / 48

S10 Magazine for Modified Glock 43X / 48

Patented 10-round steel magazine that sits flush in a Shield Arms grip-chopped Glock® 43X or 48. Extends to 12 or 15 rounds with S10 extensions. Requires a steel mag catch. Made in the USA.
$35.95
S15 Combo Pack 2 - Nitrocarb

S15 Combo Pack 2 for Glock 43X / 48

Three S15 Gen 3 15-round magazines and an S15 +5 extension for the Glock 43X/48: carry two flush and run the third at 20.
$149.95
Z9 +0 Plastic Base Plates

Z9 +0 Plastic Base Plate for Glock 43

A replacement plastic base plate for the Shield Arms Z9 magazine in the Glock 43. Keeps the Z9 at 9 rounds, uses your existing spring, and slides on with no tools.
$2.95
Z9 Magazine Combo 2 - Black

Z9 Magazine Combo 2 for Glock 43

Three Z9 9-round steel magazines and a Z9 +1 extension for the Glock 43: run two at 9 and one at 10. Requires a Shield Arms Z-Series steel mag catch (sold separately).
$137.95 $119.95
DS20 Combo 1 - Gen 3 Glock 17

DS20 Combo 1 for Glock 17

Three DS20 20-round steel magazines and the DS-Series steel mag catch they run on, in a Gen 3 or Gen 4/5/6 version. A full Glock 17 setup with three more rounds per mag than factory.
$124.95
S10 +2 Pre-Installed Magazine Extension - Black

S10 +2 Pre-Installed Magazine Extension

A Shield Arms S10 magazine with the +2 extension pre-installed: 12 rounds, ready to load. For Shield grip-chopped Glock® 43X and 48 pistols. Requires a steel mag catch. Made in the USA.
$68.95
S15 Combo Pack 3 - Black

S15 Combo Pack 3 for Glock 43X / 48

Three S15 Gen 3 15-round magazines and two S15 +5 extensions for the Glock 43X/48: carry one flush and run two at 20.
$179.95
Shield Arms S10 +2 Extension - Black

Shield Arms S10 +2 Extension

Adds 2 rounds to the Shield Arms S10 magazine, taking it from 10 to 12. Billet 6061 aluminum with an easy-access floor plate for cleaning without removing the extension. Made in the USA.
$39.95
Z8 Magazine for Glock® 43

Z8 8-Round Flush Steel Magazine for Glock 43

8 rounds of 9mm in a steel magazine for the Glock® 43 that sits flush, the same length as the factory 6-round mag. Requires a Z-Series steel mag catch.
$36.95
Z9 +1 Mag Extension for Glock® 43 - Black

Z9 +1 Magazine Extension for Glock 43

Takes a Shield Arms Z9 magazine from 9 rounds to 10 in your Glock® 43. Billet 6061 aluminum, easy-access floor plate, 12-coil plus-power spring included. Made in the USA.
$39.95
Z9 Magazine Combo 3 - Black

Z9 Magazine Combo 3 for Glock 43

Three Z9 9-round steel magazines and two Z9 +1 extensions for the Glock 43: run two at 10 and one at 9. Requires a Shield Arms Z-Series steel mag catch (sold separately).
$165.95 $139.95
Z9 +1 Pre-Installed Magazine Extension for Glock® 43 - Black

Z9 Magazine with +1 Pre-Installed Extension for Glock 43

A Shield Arms Z9 steel magazine with the +1 extension and plus-power spring installed: 10 rounds in your Glock® 43, ready to load. Requires a Z-Series steel mag catch.
$68.95
DS18 Combo 1 for Glock 19 - Gen 3

DS18 Combo 1 for Glock 19

Three DS18 18-round steel magazines and the DS-Series steel mag catch they run on, in a Gen 3 or Gen 4/5/6 version. A full Glock 19 setup with three more rounds per mag than factory.
$124.95
S10 +5 Pre-Installed Magazine Extension - Black

S10 +5 Pre-Installed Magazine Extension

A Shield Arms S10 magazine with the +5 extension pre-installed: 15 rounds, ready to load. For Shield grip-chopped Glock® 43X and 48 pistols. Requires a steel mag catch. Made in the USA.
$68.95
S15 Combo Pack 4 - Black

S15 Combo Pack 4 for Glock 43X / 48

Three S15 Gen 3 15-round magazines, two S15 +5 extensions and the DUAL-FIT steel mag catch for the Glock 43X and 48. Carry one flush at 15 and run two 20-round reloads; catch is right- or left-handed.
$199.95
Shield Arms S10 +5 Extension - Black

Shield Arms S10 +5 Extension

Adds 5 rounds to the Shield Arms S10 magazine, taking it from 10 to 15. Billet 6061 aluminum with an easy-access floor plate for cleaning without removing the extension. Made in the USA.
$39.95
Z9 Magazine Combo 4 - Black

Z9 Magazine Combo 4 for Glock 43

Three Z9 9-round steel magazines, two Z9 +1 extensions and the Standard Z-Series steel mag catch for the Glock 43. 29 rounds in all, with everything you need in the box.
$184.95
Shield Arms S15 +10 Magazine Extension - Black

S15 +10 Magazine Extension for Glock 43X / 48

Takes a Shield Arms S15 magazine from 15 to 25 rounds in the Glock 43X/48. Billet 6061 aluminum with a 15-coil power spring and easy-access floor plate.
$39.95
S15 +10 Pre-installed Magazine Extension - Black

S15 +10 Pre-Installed Magazine for Glock 43X / 48

An S15 Gen 3 magazine with the black anodized S15 +10 extension and a 15-coil power spring already installed. That’s 25 rounds for the Glock 43X/48, ready to load.
$74.95
S15 Combo Pack 5 - Nitrocarb

S15 Combo Pack 5 for Glock 43X / 48 – 5 Magazines

Five S15 Gen 3 15-round steel magazines for the Glock® 43X and 48, in black Nitrocarb. 75 rounds, all flush. Requires a Shield Arms steel mag catch, sold separately.
$189.95
Z9 Magazine Combo 5

Z9 Magazine Combo 5 for Glock 43 – 5 Magazines

Five Shield Arms Z9 9-round steel magazines for the Glock 43, 45 rounds in all. Each pistol needs a Z-Series steel mag catch, sold separately.
$179.95
Z9 Magazine Replacement Plastic

Z9 Magazine Replacement Plastic

Replacement base plate, locking plate and follower for the Shield Arms Z9 magazine. Black. Uses your Z9’s existing spring.
$3.95
Replacement Spring for Z9 Magazine

Replacement Spring for Z9 Magazine

Replacement Spring for Z9 Magazine - Premium quality product with superior construction and reliable performance.
$2.95
Shield Arms S15 +2 Magazine Extension - Black

S15 +2 Magazine Extension for Glock 43X / 48

A billet aluminum +2 extension that takes a Shield Arms S15 magazine from 15 to 17 rounds in the Glock 43X/48. The 11-coil plus-power spring is included.
$34.95
Picture of S15 +2 Pre-Installed Magazine for Glock 43X / 48

S15 +2 Pre-Installed Magazine for Glock 43X / 48

An S15 Gen 3 magazine with the S15 +2 extension and an 11-coil plus-power spring already installed. That’s 17 rounds for the Glock 43X/48, with the extension in six colors.
$68.95
S15 Combo Pack 6 - Nitrocarb

S15 Combo Pack 6 for Glock 43X / 48 – 10 S15 Gen 3 Magazines

Ten S15 Gen 3 15-round steel magazines for the Glock® 43X and 48, in black Nitrocarb. 150 rounds, all flush. Requires a Shield Arms steel mag catch, sold separately.
$294.95 $249.95
Z9 Magazine Combo 6

Z9 Magazine Combo 6 for Glock 43 – 10 Magazines

Ten Shield Arms Z9 9-round steel magazines for the Glock 43, 90 rounds in all. Each pistol needs a Z-Series steel mag catch, sold separately.
$329.95 $299.95
Replacement Spring for Z9 Magazine (5 Pack)

Replacement Spring for Z9 Magazine (5 Pack)

Replacement Spring for Z9 Magazine (5 Pack) - Premium quality product with superior construction and reliable performance.
$13.95
Shield Arms S15 +5 Magazine Extension - Black

S15 +5 Magazine Extension for Glock 43X / 48

A billet aluminum +5 extension that takes a Shield Arms S15 magazine from 15 to 20 rounds in the Glock 43X/48. The 12-coil power spring is included. Your S15 runs on a Shield Arms steel mag catch.
$39.95
S15 +5 Pre-Installed Magazine Extension - Black

S15 +5 Pre-Installed 20-Round Magazine for Glock 43X / 48

Our patented S15 Gen 3 magazine with the +5 extension and a 12-coil power spring pre-installed. Holds 20 rounds of 9mm in the Glock 43X and 48 and arrives ready to load. Remove the extension and swap the spring to carry it flush at 15. Requires a Shield Arms steel mag catch. Made in USA.
$74.95
S15 Combo Pack 7 - Nitrocarb

S15 Combo Pack 7 for Glock 43X / 48

Three S15 Gen 3 15-round steel magazines plus one +5 and one +2 extension for the Glock® 43X and 48. Run 15, 17 and 20. Requires a Shield Arms steel mag catch, sold separately.
$184.95
Z-Series Dual Mag Kit

Z-Series Dual Mag Kit for Glock 43 – Z8 + Z9 + Steel Mag Catch

One Z8 8-round flush magazine, one Z9 9-round magazine and the steel mag catch they both run on. Carry 8 flush, reload with 9. Made in the USA.
$59.95
S15 Combo Pack 8 - Black

S15 Combo Pack 8 for Glock 43X / 48

Three S15 Gen 3 magazines with S15 +5 extensions pre-installed, plus the DUAL-FIT steel mag catch, for the Glock 43X and 48. 20 rounds each, ready to load; catch is right- or left-handed.
$199.95
S15 Combo Pack 9 - Black

S15 Combo Pack 9 for Glock 43X / 48

Three S15 Gen 3 magazines with S15 +2 extensions pre-installed, plus the DUAL-FIT steel mag catch, for the Glock 43X and 48. 17 rounds each with minimal added length; catch is right- or left-handed.
$194.95
Premium S15 Steel Mag Catch for Glock® 43X / 48 - Nitride

Premium S15 Steel Mag Catch for Glock 43X/48

Premium hand-specific steel mag catch for Shield Arms S15 magazines. Enhanced ergonomics with extended knurling, beveled edges for smooth reloads, and increased magazine engagement. Not compatible with OEM magazines. Select left or right hand. Made in USA, lifetime warranty.
$36.95
S15 Magazine GEN 3 With Grip Chop Sleeve - Nitrocarb

S15 Magazine GEN 3 With Grip Chop Sleeve

Our patented 15-round S15 Gen 3 steel magazine, packaged with a Grip Chop Sleeve for a better grip on Shield Arms grip-chopped Glock® 43X and 48 pistols. Requires a steel mag catch. Made in the USA.
$49.95
S15 Magazine Grip Chop Sleeve

S15 Magazine Grip Chop Sleeve

Slides onto a Shield Arms S15 magazine to restore full grip length in an S10 grip-chopped Glock® 43X or 48. Designed for Gen 3 S15s and works with S15 +2, +5 and +10 magazines. Made in the USA.
$8.95
Picture of S15 Magwell Combo 1 for Glock 43X / 48

S15 Magwell Combo 1 for Glock 43X / 48

The complete Glock® 43X / 48 upgrade: three S15 Gen 3 15-round steel magazines, a DUAL-FIT black nitride steel mag catch, and a black Carry Magwell. Made in the USA.
$188.95
Picture of S15 Magwell Combo 2 for Glock 43X / 48

S15 Magwell Combo 2 for Glock 43X / 48

Three S15 Gen 3 15-round steel magazines, one S15 +5 extension, one DUAL-FIT black nitride steel mag catch, and a black Carry Magwell for the Glock® 43X / 48. Carry 15, reload with 20. Made in the USA.
$224.95
Picture of S15 Magwell Combo 3 for Glock 43X / 48

S15 Magwell Combo 3 for Glock 43X / 48

Three S15 Gen 3 15-round steel magazines, one S15 +2 extension, one DUAL-FIT black nitride steel mag catch, and a black Carry Magwell for the Glock® 43X / 48. 17 rounds with only a little added length. Made in the USA.
$220.95
S15 Starter Kit - Nitrocarb

S15 Starter Kit for Glock 43X / 48

Everything you need to run an S15 in your Glock 43X or 48: one S15 Gen 3 15-round steel magazine and a DUAL-FIT black nitride steel mag catch. Made in the USA.
$44.95
Standard Z9 Mag Catch for Glock® 43 - Nitride

Standard Z-Series Mag Catch for Glock 43

A steel mag catch for the Glock 43 that runs Shield Arms Z8 and Z9 magazines, with a low-profile, textured button. Replaces the factory polymer catch with basic tools.
$9.95
S-Series Dual Fit Mag Catch

DUAL-FIT Mag Catch for Glock 43X / 48

Steel mag catch for the Glock 43X and 48 that runs Shield Arms S-Series magazines and Glock’s factory 15-round steel magazines on one catch. Black nitride, made in the USA. Pick the hand you shoot with. Right-handed puts the button on the left side of the frame, under your right thumb, like a factory 43X/48. Left-handed puts it on the right side.
$19.95
Glock® 33 Round Magazine for G17/34

Glock® 33 Round Magazine for G17/34

Glock® 33 Round Magazine for G17/34 - Premium quality product with superior construction and reliable performance.
$34.95
OEM Glock® G43X/48 Magazine

OEM Glock G43X/48 10 Round Magazine

OEM Glock G43X/48 10 Round Magazine - Premium quality product with superior construction and reliable performance.
$21.95
[S15-ALU-BAS-BLK] S15 +0 Aluminum Base Plate (Black)

S15 +0 Aluminum Base Plate

A billet aluminum +0 replacement base plate for the Shield Arms S15 magazine. It has three window cuts for grip and a dot-matrix marking panel, in six anodized colors.
$24.95
S15 +0 Plastic Base Plate Red

S15 +0 Plastic Base Plate

A replacement +0 plastic base plate for Shield Arms S15 Gen 2 and Gen 3 magazines, with three window cuts for grip, in Red or Grey.
$2.95
S15 Magazine Replacement Plastic

S15 Magazine Replacement Plastic

A replacement follower, locking plate and base pad for the Shield Arms S15 magazine. Choose the Gen 1 set or the Gen 2 & 3 set. Uses your S15’s existing spring.
$3.95
Replacement Spring for S15 Magazine

Replacement Spring for S15 Magazine

A 10-coil replacement spring for the Shield Arms S15 magazine at 15 rounds. Built for high round counts. Also sold in 3- and 5-packs.
$2.95
Replacement Spring for S15 Magazine (3 Pack)

Replacement Spring for S15 Magazine (3 Pack)

Three 10-coil replacement springs for the Shield Arms S15 magazine at 15 rounds. Refresh a set of S15s at once, or keep spares on hand.
$7.95
Replacement Spring for S15 Magazine (5 Pack)

Replacement Spring for S15 Magazine (5 Pack)

Five 10-coil replacement springs for the Shield Arms S15 magazine at 15 rounds. Refresh a set of S15s at once, or keep spares on hand.
$13.95